双层增材制造牙冠的可行性验证
本研究评估双层设计牙冠的增材制造可行性,基于下颌第一磨牙钛代型设计单层与双层解剖冠,双层冠内层占总体积25%用弹性材料、外层用硬质材料,经材料喷射打印机制备,肉眼评估边缘与内部适合性均可接受,结论为双层牙冠可用材料喷射打印机制造。
要点
- 双层牙冠设计可通过材料喷射打印机制造。
- 双层冠内层占总体积25%用弹性材料,外层用硬质材料。
- 单层与双层标本边缘及内部适合性肉眼评估可接受。
核心结论
- 双层设计牙冠可采用材料喷射打印机制造,且不同性能材料可组合用于同一牙冠。
研究设计与样本
- 基于下颌第一磨牙全冠修复钛代型设计单层(ML)与双层(2L)解剖冠,用材料喷射打印机(Connex3 Object260)制造并肉眼评估适合性。
主要发现
- ML与2L标本均由材料喷射打印机制造,边缘与内部适合性肉眼评估可接受。
关键数值与推荐
- 2L组内层占总体积25%,用弹性聚合物Vero制造;外层用硬质聚合物Rigur RGD450制造。
- ML组整体用硬质聚合物Rigur RGD450制造。
临床怎么用
- 材料喷射技术可制造双层牙冠,为同一牙冠组合不同性能材料提供可能。
局限性
- 适合性仅肉眼评估,未报告量化测量或统计比较。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVES: To assess the feasibility of additively manufacturing a crown with a 2-layer design. METHODS: A mandibular first molar tooth preparation titanium die for a full coverage restoration was obtained. The die was used to design a monolayer (ML group) and 2-layer (2L group) anatomically contoured crown. In the ML group, the specimen was manufactured with a hard polymer (Rigur RGD450; Stratasys). In the 2L group, the crown was splinted into 2 parts: the intaglio that represented 25% of the total crown volume that was manufactured with a resilient polymer (Vero; Stratasys) and the exterior that represented the remaining crown volume that was manufactured with a hard polymer (Rigur RGD450; Stratasys). Specimens were manufactured using a material jetting printer (Connex3 Object260; Stratasys). The marginal and internal discrepancies of ML and 2L specimens were visually assessed. RESULTS: The ML and 2L specimens were manufactured using a material jetting printer that obtained a visually acceptable marginal and internal discrepancy. CONCLUSIONS: The 2-layer dental crown can be manufactured using a material jetting printer. CLINICAL SIGNIFICANCE: Material jetting technology has the capability to fabricate a 2-layer dental crown design which can be fabricated using materials with different properties.
引用
- Revilla-León M, Zandinejad A. Two-layer additively manufactured crown: Proof of concept. J Dent. 2021. PMID: 34146654. doi:10.1016/j.jdent.2021.103730
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。