文献速递牙体牙髓病

计算机控制CO2激光消融系统在锥形束CT与数字图像引导下开髓的初步研究

Computer-Controlled CO2 Laser Ablation System for Cone-beam Computed Tomography and Digital Image Guided Endodontic Access: A Pilot Study.
PubMed 文献 · J Endod · 2021-06-10

本研究在体外将计算机控制的9.3-μm CO2激光消融系统与CBCT及空间校准数字图像结合,对20颗健康后牙进行开髓。所有20颗牙均成功开髓且无医源性错误,不同开髓方式去除硬组织体积不同(传统39.41 mm³,超保守7.1 mm³等)。结论认为数字图像引导与高重频激光集成可用于高效切割牙体硬组织。

要点

  • 20颗离体后牙均经激光开髓成功,无医源性错误。
  • 传统开髓去除硬组织39.41 mm³,超保守仅7.1 mm³。
  • CBCT与数字图像配准可提供开髓动态导航。

核心结论

  • 基于特征识别和CBCT数据配准的数字图像引导是解决开髓动态导航挑战的可行方法。
  • 高脉冲重复频率的现代激光与计算机控制扫描系统集成适合高效切割牙体硬组织。

研究设计与样本

  • 体外研究,对20颗根管系统发育完全的健康后牙进行CBCT扫描和激光开髓。
  • 构建了计算机控制的9.3-μm CO2激光消融系统并配合定制软件,将CBCT体数据与空间校准数字图像融合。
  • 实施了传统、保守、超保守、桥式、桁架式和根管口定向六种开髓方式。

主要发现

  • 所有20颗牙(20/20)均成功开髓且无医源性错误。
  • 开髓后CBCT容积渲染用于定性验证开髓准确性。
  • 去除硬组织体积:传统39.41 mm³,保守9.76 mm³,超保守7.1 mm³,桥式11.53 mm³,桁架式19.21 mm³,根管口定向16.86 mm³。

关键数值与推荐

  • 去除硬组织体积(mm³):传统39.41,保守9.76,超保守7.1,桥式11.53,桁架式19.21,根管口定向16.86。

临床怎么用

  • 激光开髓系统结合CBCT和数字图像引导可实现微创开髓并保留更多牙体组织。
  • 不同开髓设计去除的硬组织量不同,临床可根据微创原则选择合适方案。

局限性

  • 本文为初步研究,样本量20颗离体牙,结果需进一步临床验证。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

INTRODUCTION: Ideal endodontic access provides unobstructed entry to the pulp chamber and visualization of the canal orifices while preserving the maximum amount of tooth structure. The aim of this study was to implement the use of lasers to accurately and predictably access teeth to follow the principles of minimally invasive endodontics. METHODS: Traditional, conservative, ultraconservative, bridge, truss, and orifice-directed accesses were performed. A computer-controlled 9.3-μm CO2 laser ablation system was assembled and coupled with custom software capable of combining cone-beam computed tomographic (CBCT) volumetric data with spatially calibrated digital images of teeth to provide an augmented reality environment for designing and preparing endodontic accesses. Twenty (N = 20) sound posterior teeth with fully developed root canal systems were imaged with CBCT scans and accessed via laser ablation in vitro. RESULTS: All 20 (20/20) teeth were successfully accessed without iatrogenic errors. Volumetric renderings from post-access CBCT scans were used to verify the access and determine accuracy qualitatively. The volumetric measurements of hard tissue removed were as follows: traditional = 39.41 mm3, conservative = 9.76 mm3, ultraconservative = 7.1 mm3, bridge = 11.53 mm3, truss = 19.21 mm3, and orifice directed = 16.86 mm3. CONCLUSIONS: Digital image guidance based on feature recognition and registration with CBCT data is a viable method to address the challenge of dynamic navigation for accessing the pulp chamber. Modern lasers with high pulse repetition rates integrated with computer-controlled scanning systems are suitable for the efficient cutting of dental hard tissues.

来源:J Endod,查看原文。版权归原作者所有。

引用

  1. Simon JC, Kwok JW, Vinculado F, et al. Computer-Controlled CO2 Laser Ablation System for Cone-beam Computed Tomography and Digital Image Guided Endodontic Access: A Pilot Study. J Endod. 2021. PMID: 34119563. doi:10.1016/j.joen.2021.06.004

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。