种植体骨切开热暴露对骨结合影响的临床前体内研究
本研究在小型猪下颌模型植入36枚锥形种植体,比较不同钻针设计与序列下骨切开温度和骨结合。新型测试钻针配合缩短序列较对照钻针显著降低最高温度、缩短钻骨时间,并在2周和8周时获得更高的BIC。
要点
- 新型钻针配合缩短序列可降低骨切开最高温度和钻骨时间
- 较低热暴露与2周、8周时更高的BIC相关
- 钻针设计和序列优化可能改善种植体骨结合
核心结论
- 使用新型测试钻针配合缩短钻骨序列制备骨切开,较标准钻针和常规方案可能因更有利的温度分布和更少机械应力而改善种植体骨结合。
研究设计与样本
- 在小型猪下颌模型中植入36枚锥形种植体,分为4组:对照钻针常规序列、对照钻针缩短序列、新型测试钻针缩短序列、老化测试钻针缩短序列。
- 钻骨过程中使用温度探针测量骨内温度,愈合2周和8周后行组织形态计量学分析BIC、fBIC和组织反应。
主要发现
- 测试钻针组钻骨时间(4.5秒,CI 1.6-7.3)显著短于对照钻针组(10.3秒,CI 7.3-13.4)。
临床怎么用
- 在种植体骨切开预备中,可考虑使用优化设计的新型钻针并采用缩短钻骨序列,以降低热暴露和机械应力,可能有利于早期骨结合。
局限性
- 本研究为小型猪临床前体内研究,结果需在临床研究中进一步验证。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVES: Thermal and mechanical stresses during osteotomy preparation can impair implant osseointegration. This study investigated implant osseointegration following the measurement of temperature exposure during osteotomy drilling, varying drill design, sequence, and drill wear. MATERIALS AND METHODS: 36 tapered implants were placed in a mandibular minipig model after guided drilling of implant osteotomies using 4 different groups: (1) control drills with a conservative, sequential drilling sequence, (2) control drills using a shortened drill sequence (PF), (3) novel test drill displaying an optimized drill design and surface treatment, PF, and (4) aged test drill, PF. Intraosseous temperatures during drilling were measured using a temperature probe. BIC, fBIC, and tissue reactions were histomorphometrically derived after 2 and 8 weeks of healing. RESULTS: Compared to control drills (1) or (2), test drills (3) resulted in significantly lower maximum temperatures ((35.4 (CI 30.2-40.5)°C vs. (46.5 (CI 41.0-52.0)°C, p = .0021)) and shorter drill times ((4.5 (CI 1.6-7.3)sec vs. 10.3 (7.3-13.4)sec). Lower osteotomy temperature values and shorter drill times corroborated with significantly higher BIC after 2 and 8 weeks healing for the test (3) compared to control groups (2) (2 weeks: (44.9 (CI 34.1-55. 7)% vs. (31.3 (CI 20.5-42.2)%, p = <.0001 and 8 weeks: (73.7 ( CI 64.2-83.2)% vs. (66.2 (CI 57.0-75.4)%, p = <.0455). CONCLUSION: The improved osseointegration of implants placed after osteotomy preparation with novel test drills using a shortened drill sequence compared to standard drills and conventional drill protocols might be attributed to more favorable thermal profiles and less mechanical stress exerted on the bone surrounding the implant osteotomy.
引用
- Heuzeroth R, Pippenger BE, Sandgren R, et al. Thermal exposure of implant osteotomies and its impact on osseointegration-A preclinical in vivo study. Clin Oral Implants Res. 2021. PMID: 33629437. doi:10.1111/clr.13729
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。