牙髓开髓洞型设计对下颌磨牙根管治疗疗效的影响
研究比较传统开髓洞型(TEC)、保守开髓洞型(CEC)与桁架开髓洞型(TAC)在下颌磨牙根管治疗中对根管预备、微生物减少、根管充填及牙体抗折性的影响。结果显示三组在微生物减少、牙本质去除量、根管偏移、居中能力、充填空隙及抗折性上无显著差异,但TEC组未预备根管表面积百分比显著低于CEC组,且TEC组髓腔内残留根充材料体积显著低于CEC和TAC组。结论认为保守开髓洞型相比传统开髓洞型在任何评估参数上均无优势。
要点
- 保守开髓洞型在微生物减少、充填质量和抗折性上与传统开髓洞型无差异。
- 传统开髓洞型未预备根管表面积百分比显著低于保守开髓洞型。
- 传统开髓洞型髓腔内残留根充材料体积显著少于保守和桁架开髓洞型。
核心结论
- 保守开髓洞型相比传统开髓洞型在所有评估参数上均无优势,且与更大比例的未预备根管表面积和更多髓腔残留根充材料相关。
主要发现
- 最终冲洗后(S4)三组间微生物减少无显著差异(P > 0.05)。
- TEC组未预备根管表面积百分比显著低于CEC组(P < 0.05)。
- 三组间牙本质去除百分比、根管偏移、居中能力和充填空隙均无显著差异(P > 0.05)。
- TEC组髓腔内残留根充材料体积显著低于CEC和TAC组(P < 0.05)。
- 三组间抗折性无显著差异(P > 0.05)。
关键数值与推荐
- 微生物采样点为根管预备前(S1)、Reciproc Blue R25预备后(S2)、R40预备后(S3)及最终冲洗后(S4)。
- 冲洗方案:每支器械使用8 mL 0.5% NaOCl,最终冲洗使用2 mL 0.5% NaOCl、2 mL 17% EDTA和2 mL 0.5% NaOCl。
- 统计方法:微生物分析采用I型负二项和beta 0-1膨胀回归模型,器械预备、充填和抗折结果采用ANOVA和Tukey检验(P < 0.05)。
临床怎么用
- 在临床选择开髓洞型时,保守开髓洞型未显示优于传统开髓洞型的证据,且可能增加未预备根管表面积和髓腔残留充填材料。
- 传统开髓洞型在根管预备覆盖率和髓腔清洁方面可能更有利,但需结合具体病例权衡牙体保存。
局限性
- 研究为体外实验,样本量较小(每组10颗),结果需临床研究进一步验证。
- 实验使用标准化离体牙和特定预备器械及冲洗方案,可能限制外推至其他临床场景。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
AIM: To assess the impact of conservative endodontic access cavities (CEC) and truss access cavities (TAC) during root canal treatment performed on mandibular molars in terms of: ability to shape and fill root canals, microbial reduction in canals, and cleaning of the pulp chamber. In addition, the fracture resistance of the teeth after coronal restoration was assessed. Traditional endodontic cavities (TEC) were used as a reference technique for comparison. METHODOLOGY: Thirty extracted intact mandibular molars were scanned in a microcomputed tomography device (micro-CT), matched based on similar anatomical features and assigned to TEC, CEC or TAC groups (n = 10). The specimens were accessed accordingly, and root canals were contaminated with bacterial suspensions of Enterococcus faecalis (21 days). Subsequently, the first microbial sample was collected from root canals (S1). The canals were initially prepared with Reciproc Blue R25 instrument followed by a second instrumentation using Reciproc Blue R40. Eight mL of 0.5% NaOCl were used as an irrigant for each instrument. A final irrigation protocol was performed with 2 mL of 0.5% NaOCl, 2 mL of 17% EDTA and another 2 mL of 0.5% NaOCl. Microbial samples were collected from root canals after R25 (S2), R40 (S3) and final irrigation (S4). The teeth were rescanned after S4. Then, root canals were filled, rescanned, restored and the teeth subjected to fracture resistance tests. The statistical analysis was performed with type I negative binomial and beta 0-1 inflation regression models for microbiological analysis. Instrumentation, filling and resistance to fracture results were subjected to anova and Tukey tests (P < 0.05). RESULTS: S4 revealed no significant variations in microbial reduction amongst the groups (P > 0.05). TEC had a significantly lower percentage of unprepared surface area than CEC (P < 0.05). No differences were found regarding the percentage of dentine removed, transportation, centring ability and filling voids amongst the groups (P > 0.05). The TEC group had a significantly lower volume of remaining root filling material within the pulp chamber than CEC and TAC groups (P < 0.05). There was no difference regarding fracture resistance amongst the groups (P > 0.05). CONCLUSION: Conservative access cavities did not offer any advantage in comparison with the traditional endodontic cavities in any of the parameters considered. Furthermore, conservative methods were associated with larger percentages of unprepared canal surface area and larger volumes of remaining root filling material within the pulp chamber.
引用
- Barbosa AFA, Silva EJNL, Coelho BP, et al. The influence of endodontic access cavity design on the efficacy of canal instrumentation, microbial reduction, root canal filling and fracture resistance in mandibular molars. Int Endod J. 2020. PMID: 32762041. doi:10.1111/iej.13383
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。