文献速递牙周病口腔正畸

骨性Ⅲ类错畸形牙周再生联合骨皮质切开术对骨嵴顶冠方牙龈厚度的数字化评估

[Digital evaluation of supracrestal gingival thickness induced by periodontal regenerative and corticotomy surgery in patients with skeletal class Ⅲ malocclusion].
PubMed 文献 · Zhonghua Kou Qiang Yi Xue Za Zhi · 2020-01-01

研究纳入22例骨性Ⅲ类错畸形需正畸-正颌联合治疗患者,前牙区行牙周组织再生结合骨皮质切开术(PRCS),用口内扫描建立软组织三维定量方法。术后6个月角化龈宽度及龈缘根方1、2 mm处牙龈厚度均显著增加,上颌增加量大于下颌。

要点

  • 口内扫描可定量评估骨嵴顶冠方牙龈厚度变化
  • PRCS可安全增加骨性Ⅲ类患者角化龈宽度
  • PRCS可增加龈缘根方1、2 mm处牙龈厚度,上颌大于下颌

核心结论

  • 基于口内扫描的定量测量方法可有效评价软组织变化。
  • PRCS可安全增加骨性Ⅲ类正畸-正颌联合治疗患者的骨嵴顶冠方牙龈厚度及角化龈宽度。

研究设计与样本

  • 纳入22例全身和牙周健康的骨性Ⅲ类错畸形患者(男4例、女18例,年龄19~35岁),观测前牙112颗(上颌46颗、下颌66颗)。
  • 术前及术后6个月记录探诊深度、出血指数、角化龈宽度,并用口内扫描获取上下颌前牙数字化模型定量分析牙龈厚度变化。

主要发现

  • 手术前后探诊深度、出血指数差异均无统计学意义(P>0.05)。
  • 术后6个月角化龈宽度从(4.22±1.43)mm显著增加至(5.18±2.32)mm(P<0.05)。
  • 术后6个月上颌、下颌前牙龈缘根方1和2 mm处牙龈厚度均较术前显著增加(P<0.05)。
  • 上颌前牙龈缘根方1和2 mm处牙龈厚度增加量分别为(0.68±0.56)和(1.00±0.69)mm,下颌分别为(0.38±0.42)和(0.58±0.45)mm。
  • 上颌牙龈厚度增加量均显著大于下颌(P<0.01)。

关键数值与推荐

  • 骨嵴顶冠方牙龈厚度测量点为牙冠正中测量矢状面上龈缘根方1和2 mm处。
  • 角化龈宽度术后6个月为(5.18±2.32)mm,术前为(4.22±1.43)mm(P<0.05)。
  • 上颌前牙龈缘根方1和2 mm处牙龈厚度增加量分别为(0.68±0.56)和(1.00±0.69)mm。
  • 下颌前牙龈缘根方1和2 mm处牙龈厚度增加量分别为(0.38±0.42)和(0.58±0.45)mm。

临床怎么用

  • 对需正畸-正颌联合治疗的骨性Ⅲ类患者,前牙去代偿正畸移动前可行PRCS以增加角化龈宽度和骨嵴顶冠方牙龈厚度。
  • 可采用口内扫描结合软件构建软组织形态测量模型,定量追踪龈缘根方1~2 mm处牙龈厚度变化。

局限性

  • 样本量较小(22例),随访时间为术后6个月。
  • 研究对象为全身和牙周健康的骨性Ⅲ类患者,结论外推需谨慎。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

Objective: To establish a quantitative three-dimensional method based on intraoral scan to evaluate the changes of soft tissue, and to evaluate the changes of supracrestal gingival thickness (SGT) in skeletal class Ⅲ patients induced by periodontal regenerative and corticotomy surgery (PRCS). Methods: Twenty-two systematically and periodontally healthy skeletal class Ⅲ patients (4 males and 18 females, aged between 19 and 35 years), who were in need of combined orthodontic-orthognathic treatment and referred to the Department of Periodontology from the Department of Orthodontics and the Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology from January, 2018 to March, 2019, were collected in the study. The teeth involved were 112 anterior teeth (46 maxillary anterior teeth and 66 mandibular anterior teeth). PRCS in anterior tooth area was conducted before orthodontic decompensation. Probing depth (PD), bleeding index (BI) and keratinized gingiva width (KGW) were recorded before surgery and 6 months post-surgery. The intraoral digital impressions of maxillary and mandibular anterior teeth were obtained by 3-shape intraoral scanner before surgery and 6 months after surgery. The Standard Tessellation Language (STL) files were processed using Geomagic qualify 12.2 software to establish the soft tissue morphological measurement model, and to quantitatively analyze the changes of gingival thickness situated 1 to 2 mm apical to the free gingival margin on the median sagittal measurement plane. Results: Probing depth and bleeding index had no significant difference before and 6 months after operation (P>0.05). KGW in 6-month post-operation group [(5.18±2.32) mm] was significantly higher than that in pre-operation group [(4.22±1.43) mm] (P<0.05). Supracrestal gingival thickness situated 1 to 2 mm apical to the free gingival margin also significantly increased 6 months after surgery (P<0.05). The changes of gingival thickness situated 1 to 2 mm apical to the free gingival margin in the upper anterior area were (0.68±0.56) and (1.00±0.69) mm, respectively. The changes in the lower anterior area were (0.38±0.42) and (0.58±0.45) mm, respectively. The gingival changes of the upper anterior teeth were also significantly higher than those of the lower anterior teeth (P<0.01). Conclusions: The described quantitative measurement based on intraoral scan could be an effective method for quantitative evaluation of the changes of soft tissue. PRCS could safely increase the supracrestal gingival thickness as well as KGW in skeletal class Ⅲ patients who were in need of combined orthodontic-orthognathic treatment. 目的: 通过口内扫描技术初步探索并建立一种评价软组织改变的方法,评估牙周组织再生结合骨皮质切开术对骨性Ⅲ类错▉骨嵴顶冠方牙龈厚度的影响。 方法: 纳入2018年1月至2019年3月于北京大学口腔医学院·口腔医院正畸科和口腔颌面外科转诊至牙周科、全身和牙周健康、需行正畸-正颌联合治疗的骨性Ⅲ类错▉畸形患者22例,其中男性4例,女性18例,年龄(24.0±4.5)岁(19~35岁);观测前牙共112颗,其中上颌前牙46颗,下颌前牙66颗。在前牙去代偿正畸移动前行牙周组织再生结合骨皮质切开术,观察探诊深度、出血指数、角化龈宽度,比较术前及术后6个月的差异。术前与术后6个月通过口内扫描技术直接获取患者上下颌前牙区数字化模型,在分析软件中构建软组织形态测量模型,并定量分析牙冠正中测量矢状面上龈缘根方1和2 mm处牙龈厚度的变化。 结果: 22例患者手术前后探诊深度、出血指数差异均无统计学意义(P>0.05);术后6个月角化龈宽度从术前的(4.22±1.43)mm显著增加至(5.18±2.32)mm(P<0.05)。术后6个月上颌、下颌前牙龈缘根方1和2 mm处牙龈厚度与术前相比均显著增加(P<0.05);其中上颌前牙龈缘根方1和2 mm处牙龈厚度增加量分别为(0.68±0.56)和(1.00±0.69)mm;下颌前牙龈缘根方1和2 mm处牙龈厚度增加量分别为(0.38±0.42)和(0.58±0.45)mm;且上颌牙龈厚度增加量均显著大于下颌(P<0.01)。 结论: 基于口内扫描技术进行软组织形态变化的定量评价方法切实可行。在骨性Ⅲ类错▉正畸-正颌联合治疗中牙周组织再生结合骨皮质切开术不但能增加角化龈宽度,而且可增加骨嵴顶冠方牙龈组织厚度。.

来源:Zhonghua Kou Qiang Yi Xue Za Zhi,查看原文。版权归原作者所有。

引用

  1. Han Y, Miao LL, Jing WD, et al. [Digital evaluation of supracrestal gingival thickness induced by periodontal regenerative and corticotomy surgery in patients with skeletal class Ⅲ malocclusion]. Zhonghua Kou Qiang Yi Xue Za Zhi. 2020. PMID: 32074666. doi:10.3760/cma.j.issn.1002-0098.2020.02.001

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。