人工智能预测CAD/CAM复合树脂冠脱粘概率
本研究评估卷积神经网络(CNN)深度学习能否根据口内扫描三维立体光刻模型的二维图像预测CAD/CAM复合树脂冠的脱粘概率。数据集含24例(12例无问题、12例脱粘),共8640张图像,随机分为6480张训练验证与2160张测试。模型预测准确率98.5%、精确率97.0%、召回率100%、F-measure 0.985,AUC 0.998,平均计算时间2 ms/step。
要点
- CNN深度学习在测试集上预测CAD/CAM复合树脂冠脱粘概率准确率达98.5%。
- 召回率100%,AUC 0.998,平均计算时间2 ms/step(2160张测试图像)。
- 数据来自大阪大学口腔医院2014年4月至2015年11月的24例CAD/CAM复合树脂冠。
核心结论
- 基于CNN的深度学习对CAD/CAM复合树脂冠脱粘概率预测表现良好,准确率98.5%、AUC 0.998。
- 研究提示该AI方法可作为预防脱粘的辅助手段,但需进一步验证。
研究设计与样本
- 回顾性研究,纳入2014年4月至2015年11月大阪大学口腔医院修复科制作的CAD/CAM复合树脂冠共24例(12例无问题、12例脱粘)。
- 从口内扫描三维立体光刻模型捕获二维图像,共8640张,随机分为6480张训练验证图像和2160张测试图像。
- 采用卷积神经网络(CNN)深度学习建立预测脱粘概率的学习模型。
主要发现
- 测试集预测准确率98.5%、精确率97.0%、召回率100%、F-measure 0.985。
- 受试者工作特征曲线下面积(AUC)为0.998。
- 2160张测试图像的平均计算时间为2 ms/step。
关键数值与推荐
- 预测准确率98.5%、精确率97.0%、召回率100%、F-measure 0.985、AUC 0.998。
- 平均计算时间2 ms/step(2160张测试图像)。
临床怎么用
- 该AI模型可用于辅助预测CAD/CAM复合树脂冠的脱粘概率,帮助识别高风险病例。
- 预测速度快(2 ms/step),具备临床实时辅助的潜力,但需外部数据验证。
局限性
- 样本量小(共24例,12例脱粘),可能影响模型泛化能力。
- 数据来自单中心,需多中心大样本验证。
- 研究为回顾性设计,尚未在前瞻性临床环境中评估。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
A preventive measure for debonding has not been established and is highly desirable to improve the survival rate of computer-aided design/computer-aided manufacturing (CAD/CAM) composite resin (CR) crowns. The aim of this study was to assess the usefulness of deep learning with a convolution neural network (CNN) method to predict the debonding probability of CAD/CAM CR crowns from 2-dimensional images captured from 3-dimensional (3D) stereolithography models of a die scanned by a 3D oral scanner. All cases of CAD/CAM CR crowns were manufactured from April 2014 to November 2015 at the Division of Prosthodontics, Osaka University Dental Hospital (Ethical Review Board at Osaka University, approval H27-E11). The data set consisted of a total of 24 cases: 12 trouble-free and 12 debonding as known labels. A total of 8,640 images were randomly divided into 6,480 training and validation images and 2,160 test images. Deep learning with a CNN method was conducted to develop a learning model to predict the debonding probability. The prediction accuracy, precision, recall, F-measure, receiver operating characteristic, and area under the curve of the learning model were assessed for the test images. Also, the mean calculation time was measured during the prediction for the test images. The prediction accuracy, precision, recall, and F-measure values of deep learning with a CNN method for the prediction of the debonding probability were 98.5%, 97.0%, 100%, and 0.985, respectively. The mean calculation time was 2 ms/step for 2,160 test images. The area under the curve was 0.998. Artificial intelligence (AI) technology-that is, the deep learning with a CNN method established in this study-demonstrated considerably good performance in terms of predicting the debonding probability of a CAD/CAM CR crown with 3D stereolithography models of a die scanned from patients.
引用
- Yamaguchi S, Lee C, Karaer O, et al. Predicting the Debonding of CAD/CAM Composite Resin Crowns with AI. J Dent Res. 2019. PMID: 31379234. doi:10.1177/0022034519867641
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。