文献速递口腔修复与种植

静态与动态计算机辅助种植手术在单牙缺隙中的精度:一项随机对照试验

The accuracy of static vs. dynamic computer-assisted implant surgery in single tooth space: A randomized controlled trial.
PubMed 文献 · Clin Oral Implants Res · 2019-05-07

该随机对照试验将60例需单颗种植的患者随机分为静态CAIS组(n=30)和动态CAIS组(n=30),由同一术者完成种植。术后CBCT与术前规划比对显示,两组在种植体平台、根尖及角度偏差上均无统计学显著差异,但动态CAIS组种植体向近中方向的偏差显著高于静态CAIS组(p=0.032)。结论认为动态CAIS在单牙缺隙中的种植精度与静态CAIS似乎相同。

要点

  • 静态与动态CAIS在单牙缺隙种植中平台、根尖及角度偏差无显著差异。
  • 动态CAIS组种植体向近中方向的偏差显著高于静态CAIS组(p=0.032)。
  • 单牙缺隙种植时动态CAIS精度与静态CAIS似乎相同。

核心结论

  • 在单牙缺隙中,动态CAIS的种植体植入精度似乎与静态CAIS相同。
  • 两组在种植体平台、根尖及角度的偏差差异均未达到统计学显著性。
  • 动态CAIS组种植体向近中方向的偏差显著高于静态CAIS组(p=0.032)。

研究设计与样本

  • 随机对照试验,共纳入60例需要单颗种植的患者。
  • 患者随机分为静态CAIS组(n=30)和动态CAIS组(n=30),由同一术者完成种植。
  • 术前CBCT导入种植规划软件设计最佳种植位置,分别使用立体光刻导板模板(静态CAIS)或种植导航系统(动态CAIS)植入种植体。
  • 术后CBCT导入种植规划软件,与规划位置进行偏差分析。
  • 主要结局为种植体平台、根尖及植入角度的偏差测量;次要结局为种植体偏差在各三维方向的分布。

主要发现

  • 静态CAIS组种植体平台和根尖平均偏差分别为0.97 ± 0.44 mm和1.28 ± 0.46 mm。
  • 动态CAIS组种植体平台和根尖平均偏差分别为1.05 ± 0.44 mm和1.29 ± 0.50 mm。
  • 静态CAIS组和动态CAIS组角度偏差分别为2.84 ± 1.71度和3.06 ± 1.37度。
  • 上述两组间差异均未达到统计学显著性。
  • 动态CAIS组种植体向近中方向的偏差显著高于静态CAIS组(p = 0.032)。

临床怎么用

  • 单牙缺隙种植时,静态与动态CAIS均可作为实现规划位置的计算机辅助方案。
  • 选择动态CAIS时需关注种植体近中方向偏差可能较大的问题。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVES: The aim of this RCT was to compare the accuracy of implant placement between static and dynamic computer-assisted implant surgery (CAIS) systems in single tooth space. MATERIALS AND METHODS: A total of 60 patients in need of a single implant were randomly assigned to two CAIS groups (Static n = 30, Dynamic n = 30) and implants were placed by one surgeon. Preoperative CBCT was transferred to implant planning software to plan the optimal implant position. Implants were placed using either stereolithographic guide template (Static CAIS) or implant navigation system (Dynamic CAIS). Postoperative CBCT was imported to implant planning software, and deviation analysis with the planned position was performed. Primary outcomes were the deviation measurements at implant platform, apex, and angle of placement. Secondary outcome was the distribution of the implant deviation into each 3D direction. RESULTS: The mean deviation at implant platform and implant apex in the static CAIS group was 0.97 ± 0.44 mm and 1.28 ± 0.46 mm, while that in the dynamic CAIS group was 1.05 ± 0.44 mm and 1.29 ± 0.50 mm, respectively. The angular deviation in static and dynamic CAIS group was 2.84 ± 1.71 degrees and 3.06 ± 1.37 degrees. None of the above differences between the two groups reached statistical significance. The deviation of implants toward the mesial direction in dynamic CAIS group was significantly higher than that of the static CAIS (p = 0.032). CONCLUSIONS: Implant placement accuracy in single tooth space using dynamic CAIS appear to be the same to that of static CAIS. (Thai Clinical Trials Registry TCTR20180826001).

来源:Clin Oral Implants Res,查看原文。版权归原作者所有。

引用

  1. Kaewsiri D, Panmekiate S, Subbalekha K, et al. The accuracy of static vs. dynamic computer-assisted implant surgery in single tooth space: A randomized controlled trial. Clin Oral Implants Res. 2019. PMID: 31060099. doi:10.1111/clr.13435

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。