再生治疗后未成熟上颌中切牙的生物力学性能:有限元分析
本研究基于µCT扫描建立未成熟上颌中切牙有限元模型,模拟再生治疗后牙本质或牙骨质沉积,分析咬合、创伤及正畸移动下的应力分布。结果显示两种硬组织沉积均降低未成熟牙体应力,但牙本质强化使应力分布更均匀且峰值更低,牙骨质则未有效传递应力。
要点
- 再生治疗后模拟硬组织沉积可降低未成熟牙体机械应力。
- 牙本质形成较牙骨质更利于应力均匀分布并降低应力峰值。
- 垂直于牙根长轴的创伤产生最大机械应力。
核心结论
- 再生治疗后模拟硬组织沉积降低未成熟上颌中切牙的机械应力。
- 牙本质形成较牙骨质更有利,因其使应力在整个牙根均匀分布并降低应力值。
研究设计与样本
- 基于µCT扫描建立上颌中切牙有限元模型。
- 模型分为未成熟牙体部分和代表再生后组织的根尖部分,根尖部分赋予牙本质或牙骨质力学属性。
- 对未成熟牙及牙本质或牙骨质强化牙模拟咬合、创伤和正畸移动,比较Von Mises应力值。
主要发现
- 未成熟切牙最大应力位于根尖区;牙本质和牙骨质强化牙最大应力位于牙根外部并向根尖递减。
- 牙创伤(垂直于牙根长轴)所致机械应力最大,其次为咬合和正畸移动。
- 所有模拟场景中牙本质强化牙的应力峰值均低于牙骨质强化牙。
- 无论牙本质或牙骨质沉积,未成熟部分的应力中位数均降低。
- 牙本质强化因吸收外力使根尖段应力值更高,而应力未向沉积的牙骨质传递。
临床怎么用
- 再生治疗中促进牙本质形成可能优于牙骨质沉积,以优化应力分布。
- 对再生治疗后的未成熟牙,需注意垂直于牙根长轴的创伤风险。
局限性
- 本研究为有限元分析,结论需临床研究验证。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
AIM: To investigate the stress distribution in an immature maxillary incisor and the same tooth after simulated revitalization with deposition of tubular dentine or cementum by finite element analysis (FEA). METHODOLOGY: A finite element model of a maxillary central incisor was developed on the basis of a µCT scan. The tooth was segmented in two parts: a part that represented a tooth in an immature state and an apical part that represented the tissue formed after revitalization. The apical part was given the mechanical properties of dentine or cementum. The immature tooth and the same tooth reinforced by either dentine or cementum underwent simulation of biting, trauma and orthodontic movement. Von Mises stress values were compared between the scenarios and tooth segments. RESULTS: Maximum stress in the immature incisor developed apically; however, dentine- and cementum-reinforced teeth revealed the greatest stress in the external portion of the root decreasing towards the apex. Greatest mechanical stress was caused by dental trauma perpendicular to the long axis of the root followed by biting and orthodontic movement. Stress peaks were lower in the dentine-reinforced tooth compared with the cementum-reinforced tooth in all scenarios; however, median stress in the immature part was reduced irrespective of dentine or cementum deposition. Dentine reinforcement caused greater stress values in the apical segment due to absorbance of the applied force, whereas stress was not transferred towards deposited cementum. CONCLUSIONS: Apposition of simulated hard tissue in a maxillary central incisor after revitalization reduced mechanical stress in the immature tooth. Formation of dentine was advantageous because, unlike cementum, it facilitated an even stress distribution throughout the root resulting in lower stress values.
引用
- Bucchi C, Marcé-Nogué J, Galler KM, et al. Biomechanical performance of an immature maxillary central incisor after revitalization: a finite element analysis. Int Endod J. 2019. PMID: 31116441. doi:10.1111/iej.13159
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。