文献速递牙体牙髓病口腔修复与种植

含氯己定与纳米三聚磷酸钠的玻璃离子水门汀对机械与抗菌性能及釉质脱矿的影响

Incorporation of chlorhexidine and nano-sized sodium trimetaphosphate into a glass-ionomer cement: Effect on mechanical and microbiological properties and inhibition of enamel demineralization.
PubMed 文献 · J Dent · 2019-04-03

本研究将氯己定(CHX,1.25%或2.5%)和/或纳米三聚磷酸钠(TMP,7%或14%)加入树脂改性玻璃离子水门汀(RMGIC),评估其抗菌/抗生物膜性能、机械性能及抑制釉质脱矿的效果。结果显示含CHX与TMP的RMGIC抗菌抗生物膜作用增强,且1.25%CHX+14%TMP和2.5%CHX+14%TMP能增加氟与TMP释放、降低釉质矿物丢失与表面下硬度损失,对机械性能影响最小。

要点

  • 含CHX与TMP的RMGIC可增强抗菌抗生物膜活性并抑制釉质脱矿。
  • 1.25%CHX+14%TMP对RMGIC机械性能影响最小。
  • 该材料适用于龋高风险患者、低应力区或临时修复。

核心结论

  • 1.25%CHX与14%TMP联合加入RMGIC可增强抗菌/抗生物膜作用及预防釉质脱矿的能力,对机械性能影响最小。

研究设计与样本

  • 体外研究,将CHX(1.25%或2.5%)和/或TMP(7%或14%)加入树脂改性玻璃离子水门汀(RMGIC)进行性能评估。

主要发现

  • 含CHX(联合或不联合TMP)的RMGIC对变形链球菌生物膜的抑制圈更大、影响更强。
  • 仅RMGIC+2.5%CHX出现压缩强度下降,RMGIC+2.5%CHX+14%TMP出现径向拉伸强度下降。
  • RMGIC+1.25%CHX+14%TMP和RMGIC+2.5%CHX+14%TMP的氟与TMP释放最高,%SH和ΔKHN值最低。
  • 含TMP组釉质氟浓度更高。

关键数值与推荐

  • 抗菌/抗生物膜活性用琼脂扩散试验和生物膜代谢评估。
  • 测定了氟与TMP释放、径向拉伸强度(DTS)和压缩强度(CS)。
  • 评估了矿物丢失百分比(%SH)、表面下硬度积分损失(ΔKHN)和釉质氟浓度。

临床怎么用

  • 含CHX与TMP的RMGIC可作为龋高风险患者的替代材料。
  • 适用于低应力区域或临时修复。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVE: To evaluate the antimicrobial/antibiofilm and mechanical properties, and the effect on enamel demineralization of a resin-modified GIC (RMGIC) containing CHX and nano-sized sodium trimetaphosphate (TMP). METHODS: RMGIC was associated with CHX (1.25 or 2.5%) and/or TMP (7 or 14%). Antimicrobial and antibiofilm activity were assessed using agar diffusion test and evaluation of biofilm metabolism, respectively. In addition, fluoride (F) and TMP releases as well as the diametral tensile (DTS) and compressive (CS) strength were determined. The percentage of mineral loss (%SH), integrated loss of subsurface hardness (ΔKHN) and enamel F concentrations were also evaluated. RESULTS: RMGICs containing CHX associated or not with TMP presented higher inhibition zones and effect on S. mutans biofilm. A reduction on CS was observed only for RMGIC + 2.5%CHX and on DTS for RMGIC + 2.5%CHX + 14%TMP. The highest F and TMP releases and lowest %SH and ΔKHN values were detected for RMGIC + 1.25%CHX + 14%TMP and RMGIC + 2.5%CHX + 14%TMP. Higher enamel F concentrations were observed for TMP groups. CONCLUSION: 1.25%CHX and 14%TMP increased antimicrobial/antibiofilm action and the ability to prevent enamel demineralization, with minimal effect on the mechanical properties of RMGIC. CLINICAL SIGNIFICANCE: RMGIC containing CHX and TMP is an alternative material for patients at high risk for dental caries and can be indicated for low-stress regions or provisional restorations.

来源:J Dent,查看原文。版权归原作者所有。

引用

  1. da Silva MER, Danelon M, Santos Souza JA, et al. Incorporation of chlorhexidine and nano-sized sodium trimetaphosphate into a glass-ionomer cement: Effect on mechanical and microbiological properties and inhibition of enamel demineralization. J Dent. 2019. PMID: 30953673. doi:10.1016/j.jdent.2019.04.001

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。