等离子体电解氧化制备含锌钙磷涂层钛种植体成骨性能的实验研究
本研究在兔下颌骨植入三种表面处理的钛种植体,比较含锌钙磷涂层、钙磷涂层及喷砂酸蚀表面的成骨性能。结果显示含锌钙磷涂层呈多级孔洞状,各时间点三组骨结合强度差异有统计学意义,术后12周含锌钙磷涂层组推出强度[(1.57±0.26) MPa]显著大于喷砂组[(0.83±0.24) MPa]。组织学观察显示含锌钙磷涂层组新生骨量各时间点均多于其他两组,表明该涂层可加速骨形成和改建、提高骨结合强度。
要点
- 含锌钙磷涂层呈多级孔洞状,各时间点三组骨结合强度差异均有统计学意义。
- 术后12周含锌钙磷涂层组推出强度[(1.57±0.26) MPa]显著大于喷砂组[(0.83±0.24) MPa]。
- 含锌钙磷涂层组各时间点新生骨量均多于钙磷涂层组和喷砂组。
核心结论
- 含锌钙磷涂层钛种植体可加速骨组织形成和改建,提高种植体与骨组织的结合强度。
研究设计与样本
- 采用随机数字表法将三种表面处理种植体(每组20枚)植入兔下颌骨双侧,于术后4、6、8、10、12周取材(每组每个时间点4枚)行推出实验及种植体-骨断面形貌分析。
主要发现
- 含锌钙磷涂层呈多级孔洞状,各组种植体骨结合强度随时间增大,各时间点三组差异均有统计学意义(P<0.05)。
- 术后12周骨结合强度最大,含锌钙磷涂层组[(1.57±0.26) MPa]显著大于喷砂组[(0.83±0.24) MPa](P<0.05)。
- 组织学观察及场发射扫描电镜显示,各时间点含锌钙磷涂层组新生骨量均多于其他两组。
临床怎么用
- 含锌钙磷涂层经等离子体电解氧化制备,或可作为提升钛种植体骨结合强度的表面改性策略。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
Objective: To explore the osteogenic activity of Zn/Ca/P-containing coatings on titanium implant surface modified by plasma electrolytic oxidation (PEO). Methods: Three groups implants including Zn/Ca/P-containing surface treated by PEO in experimental groups and Ca/P-containing and TiO(2) sandblasted surface in control group were randomly inserted in the bilateral mandibular of rabbits. Mechanical testing and implant-bone interface observation were performed at 4, 6, 8, 10 and 12 weeks after implantion. Results: Zn/Ca/P-containing coating presented a microporous structure. The push-out value indicated the statistical differences among the three groups at each observed time point (P<0.05), and implant-bone bonding power reached a maximum value at 12 weeks, those in the Zn/Ca/P-containing group [(1.57±0.26) MPa] was higher than those in the group with sandblasted surface [(0.83±0.24) MPa] (P<0.05). Histological examination and implant-bone interface observation using field scaning electron microscope (FSEM) showed that the new bone of implant-bone interface increased with healing time and the result from Zn/Ca/P-containing group was superior to that from the control groups at each observed time point. Conclusions: Zn/Ca/P-containing coatings by PEO can accelerate bone formation and remodeling, and enhance bone-implant bonding force. 目的: 探讨等离子体电解氧化(plasma electrolytic oxidation,PEO)制备的含锌钙磷涂层种植体的成骨性能。 方法: 应用PEO在钛种植体表面制备含锌钙磷涂层(含锌钙磷涂层组),并以不含锌的钙磷涂层种植体(钙磷涂层组)及喷砂酸蚀处理的钛种植体(喷砂组)作为对照。用随机数字表法将3组种植体(每组20枚)植于兔下颌骨双侧,分别于术后4、6、8、10、12周取材(每组每个时间点4枚种植体),进行种植体推出实验及种植体-骨断面形貌分析。 结果: 含锌钙磷涂层呈多级孔洞状。各组种植体骨结合强度随时间增大,且术后各时间点3组差异均有统计学意义(P<0.05);术后12周种植体骨结合强度最大,含锌钙磷涂层组种植体骨结合强度[(1.57±0.26)MPa]显著大于喷砂组[(0.83±0.24)MPa](P<0.05)。组织学观察及场发射扫描电镜结果显示,随时间增加,种植体表面附着的骨质增多,各时间点含锌钙磷涂层组新生骨量均多于其他两组。 结论: 含锌钙磷涂层钛种植体可加速骨组织的形成和改建,提高种植体与骨组织的结合强度。.
引用
- Feng W, Zhao BH, Zhang W, et al. [An experimental study of Zn/Ca/P-containing coatings on titanium implant surface modified by plasma electrolytic oxidation]. Zhonghua Kou Qiang Yi Xue Za Zhi. 2019. PMID: 30630259. doi:10.3760/cma.j.issn.1002-0098.2019.01.009
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。