超细晶钛表面改性:力学性能、细胞相容性与骨整合潜力的影响
本研究通过等通道转角挤压制备超细晶钛(UFG-Ti),并采用喷砂酸蚀处理其表面,评估力学性能、润湿性、粗糙度、人骨来源成骨前体细胞相容性及兔体内骨整合。结果显示UFG-Ti屈服强度、抗拉强度和疲劳耐力分别比常规钛高40%、45%和34%,表面处理后粗糙度和润湿性与常规钛相似,细胞黏附和铺展相当,矿化在亲水处理表面更高但UFG-Ti与Ti无显著差异,兔模型4周拔出试验显示骨整合相似。结论为现有钛表面处理可转用于UFG-Ti,且表面处理后的UFG-Ti种植体具有更优力学性能并保持细胞相容性和骨整合潜力。
要点
- UFG-Ti屈服强度、抗拉强度和疲劳耐力分别比常规Ti高40%、45%和34%。
- 现有喷砂酸蚀处理可应用于UFG-Ti,获得与常规Ti相似的粗糙度和润湿性。
- 表面处理UFG-Ti的细胞相容性和兔体内骨整合与常规Ti相似。
核心结论
- 现有钛表面处理可转用于超细晶钛,表面处理后的超细晶钛种植体力学性能更优且保持细胞相容性和骨整合潜力。
研究设计与样本
- 超细晶钛通过连续等通道转角挤压制备,表面经喷砂酸蚀处理。
- 评估力学性能(拉伸和疲劳强度)、润湿性和粗糙度参数。
- 人骨小梁来源成骨前体细胞培养4天和28天分别检测细胞相容性和矿化。
- 兔体内模型植入4周后进行生物力学拔出测试。
主要发现
- UFG-Ti的屈服强度、抗拉强度和疲劳耐力分别比Ti高40%、45%和34%。
- 表面处理后疲劳耐力略有降低。
- UFG-Ti与常规Ti的粗糙度和润湿性相似。
- 所有样品细胞黏附和铺展相当,亲水处理表面矿化更高,但UFG-Ti与Ti间无显著差异。
- 拔出测试显示表面处理UFG-Ti的骨整合与表面处理Ti相似。
临床怎么用
- 现有喷砂酸蚀方案可直接用于超细晶钛种植体表面处理。
- 超细晶钛种植体可能提供更优力学性能而不牺牲细胞相容性和骨整合。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVE: The main objective of this study was to demonstrate that dental implants made from ultrafine-grain titanium (UFG-Ti) can be created that replicate state of the art surfaces of standard coarse-grain titanium (Ti), showing excellent cytocompatibility and osseointegration potential while also providing improved mechanical properties. MATERIAL AND METHODS: UFG-Ti was prepared by continuous equal channel angular processing (ECAP), and surfaces were treated by sandblasting and acid etching. Mechanical properties (tensile and fatigue strength), wettability, and roughness parameters were evaluated. Human trabecular bone-derived osteoblast precursor cells (HBCs) were cultured on all samples to examine cytocompatibility and mineralization after 4 and 28 days, respectively. Biomechanical pull-out measurements were performed in a rabbit in vivo model 4 weeks after implantation. RESULTS: Both yield and tensile strength as well as fatigue endurance were higher for UFG-Ti compared to Ti by 40%, 45%, and 34%, respectively. Fatigue endurance was slightly reduced following surface treatment. Existing surface treatment protocols could be applied to UFG-Ti and resulted in similar roughness and wettability as for standard Ti. Cell attachment and spreading were comparable on all samples, but mineralization was higher for the surfaces with hydrophilic treatment with no significant difference between UFG-Ti and Ti. Pull-out tests revealed that osseointegration of surface-treated UFG-Ti was found to be similar to that of surface-treated Ti. CONCLUSION: It could be demonstrated that existing surface treatments for Ti can be translated to UFG-Ti and, furthermore, that dental implants made from surface-treated UFG-Ti exhibit superior mechanical properties while maintaining cytocompatibility and osseointegration potential.
引用
- Pippenger BE, Rottmar M, Kopf BS, et al. Surface modification of ultrafine-grained titanium: Influence on mechanical properties, cytocompatibility, and osseointegration potential. Clin Oral Implants Res. 2019. PMID: 30521101. doi:10.1111/clr.13396
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。