文献速递牙体牙髓病

负载BMP-2的介孔硅酸钙支架促进人牙髓细胞成牙本质分化

Enhanced Capability of Bone Morphogenetic Protein 2-loaded Mesoporous Calcium Silicate Scaffolds to Induce Odontogenic Differentiation of Human Dental Pulp Cells.
PubMed 文献 · J Endod · 2018-01-01

本研究将骨形态发生蛋白2(BMP-2)负载于介孔硅酸钙(MesoCS),并用熔融沉积建模结合聚己内酯制成三维支架。在模拟体液中,该支架从48小时至7天持续显著释放BMP-2,且人牙髓细胞的黏附、增殖及碱性磷酸酶活性均显著优于无BMP-2或无介孔处理的支架。结果表明该三维打印支架可作为BMP-2递送系统,是再生牙髓治疗中理想的牙本质诱导生物材料。

要点

  • MesoCS/BMP-2支架在48小时至7天持续显著释放BMP-2。
  • 该支架促进人牙髓细胞黏附、增殖及碱性磷酸酶活性。
  • 三维打印MesoCS支架可作为再生牙髓治疗的牙本质诱导材料。

核心结论

  • 三维打印的MesoCS支架能有效递送BMP-2,是再生牙髓治疗中理想的牙本质诱导生物材料。

研究设计与样本

  • 本研究将BMP-2负载于介孔硅酸钙,并采用熔融沉积建模结合聚己内酯制备三维支架。

主要发现

  • 在模拟体液浸泡7天试验中,MesoCS/BMP-2支架释放钙、硅离子的模式与硅酸钙支架相似。
  • 从48小时至7天,MesoCS/BMP-2支架持续释放BMP-2的量显著多于CS支架。
  • 人牙髓细胞在MesoCS/BMP-2支架上的黏附与增殖显著优于无BMP-2或无介孔处理的支架,碱性磷酸酶活性结果亦然。

临床怎么用

  • 该支架可作为BMP-2递送系统,用于再生牙髓治疗中以诱导牙本质分化。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

INTRODUCTION: Calcium silicate bioceramics have been broadly used as reparative or grafting materials with good bioactivity and biocompatibility in dental application. It has been shown that applying a mesoporous process to calcium silicate gives it great potential as a controlled drug delivery system. METHODS: The aim of this study was to investigate a novel osteoinductive scaffold by loading bone morphogenetic protein 2 (BMP-2) to mesoporous calcium silicate (MesoCS) and fabricating it as 3-dimensional scaffolds using fused deposition modeling combined with polycaprolactone. RESULTS: The MesoCS/BMP-2 scaffold showed similar patterns to that of a calcium silicate scaffold in releasing calcium and silicon ions in a simulated body fluid (SBF) immersion test for 7 days, but BMP-2 continued releasing from the MesoCS/BMP-2 scaffold significantly more than the CS scaffold from 48 hours to 7 days. Adhesion and proliferation of human dental pulp cells cultured on a MesoCS/BMP-2 scaffold were also more significant than scaffolds without BMP-2 or mesoporous as well as the results of the test on alkaline phosphatase activity. CONCLUSIONS: The results support that the novel 3-dimensional-printed MesoCS scaffold performed well as BMP-2 delivery system and would be an ideal odontoinductive biomaterial in regenerative endodontics.

来源:J Endod,查看原文。版权归原作者所有。

引用

  1. Huang KH, Chen YW, Wang CY, et al. Enhanced Capability of Bone Morphogenetic Protein 2-loaded Mesoporous Calcium Silicate Scaffolds to Induce Odontogenic Differentiation of Human Dental Pulp Cells. J Endod. 2018. PMID: 30409449. doi:10.1016/j.joen.2018.08.008

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。