文献速递牙体牙髓病

收缩性开髓洞形对下颌磨牙根管原始弯曲参数的影响

Impacts of Contracted Endodontic Cavities on Primary Root Canal Curvature Parameters in Mandibular Molars.
PubMed 文献 · J Endod · 2018-08-25

研究比较收缩性开髓洞形与未扩展传统开髓洞形在下颌磨牙IV型近中根管不同预备阶段对原始根管弯曲角度、位置和半径的影响。结果显示两种洞形均显著减小弯曲角度、增大半径并使弯曲点根向移动,组间无显著差异,但收缩性开髓洞形治疗时间显著更长。

要点

  • 收缩性开髓洞形与传统开髓洞形对根管原始弯曲参数的影响无显著差异。
  • 两种开髓方式在预备各阶段均减小弯曲角度、增大半径并使弯曲点根向移动。
  • 收缩性开髓洞形的治疗时间显著长于传统开髓洞形。

核心结论

  • 下颌磨牙收缩性开髓洞形与未扩展传统开髓洞形在根管预备后对原始根管弯曲参数的影响相似,但收缩性开髓洞形治疗时间更长。

研究设计与样本

  • 在预备前、滑行通道预备后和最终器械预备后,使用重定位装置拍摄X线片测定原始根管弯曲参数。
  • 使用PathFiles和ProFile Vortex器械预备至工作长度30/.04,记录器械操作时间,采用双因素重复测量方差分析和Tukey检验分析。

主要发现

  • 收缩性开髓洞形组弯曲角度从预备前42.57°±8.00°降至最终预备后32.61°±5.17°,半径从6.48±1.81 mm增至10.55±1.48 mm。
  • 传统开髓洞形组弯曲角度从预备前38.80°±7.15°降至最终预备后30.08°±6.99°,半径从6.97±2.31 mm增至11.01±2.20 mm。
  • 两种洞形在各预备阶段弯曲角度和半径变化均显著(P < .001),弯曲位置根向移动(P < .001)。
  • 收缩性开髓洞形与传统开髓洞形之间弯曲参数变化无显著差异(P > .05)。
  • 收缩性开髓洞形治疗时间(83.17±6.71分钟)显著长于传统开髓洞形(33.18±9.20分钟)(P < .0001)。

临床怎么用

  • 在权衡收缩性开髓洞形与传统开髓洞形时,需考虑收缩性开髓洞形显著延长治疗时间。
  • 两种开髓方式对弯曲根管原始弯曲参数的影响相似,临床选择可综合其他因素决策。

局限性

  • 样本量较小(每组12颗牙),结果外推需谨慎。
  • 研究为体外实验,未反映口内真实操作环境。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

INTRODUCTION: The purpose of this study was to provide information regarding the debate on contracted endodontic cavities (CECs); their impacts on angle, location, and radius of the primary canal curvature (PCC) were assessed in type IV mesial root canals of mandibular molars at different stages of instrumentation. Impacts on treatment time were also assessed. METHODS: Twenty-four teeth were matched by radiographic and micro-computed tomographic criteria and accessed via CECs (CEC, n = 12) or nonextended traditional endodontic cavities (TECs, n = 12). PCC parameters were radiographically determined using a repositioning apparatus before glide path preparation (PI), after glide path preparation, and after final instrumentation (FI). Instrumentation was performed with PathFiles (13/.02, 16/.02; Dentsply Maillefer, Ballaigues, Switzerland) and ProFile Vortex files (Dentsply Tulsa Dental Specialties, Tulsa, OK) to size 30/.04 at the working length under copious irrigation. Changes in PCC were measured with ImageJ (National Institutes of Health, Bethesda, MD). The instrumentation time was recorded. Data were analyzed with 2-way repeated measures analysis of variance (α < .05) and Tukey honest significant difference tests. RESULTS: A significant (P < .001) decrease in the mean angle and increase in the mean radius were detected at each instrumentation stage for both CECs (angle: PI = 42.57°± 8.00°, FI = 32.61°± 5.17°; radius: PI = 6.48 ± 1.81 mm, FI = 10.55 ± 1.48 mm) and TECs (angle: PI = 38.80°± 7.15°, FI = 30.08°± 6.99°; radius: PI = 6.97 ± 2.31 mm, FI = 11.01 ± 2.20 mm). PCC location shifted apically (P < .001). Changes in PCC parameters did not differ significantly between CECs and TECs (P > .05). The treatment time was significantly (P < .0001) longer for CECs (83.17 ± 6.71 minutes) than for TECs (33.18 ± 9.20 minutes). CONCLUSIONS: Instrumentation of curved mesial canals reduced the severity and abruptness of PCC and shifted the PCC location apically similarly in mandibular molars with CECs and those with nonextended TECs. The extended treatment time with CEC merits consideration when debating CECs versus TECs.

来源:J Endod,查看原文。版权归原作者所有。

引用

  1. Marchesan MA, Lloyd A, Clement DJ, et al. Impacts of Contracted Endodontic Cavities on Primary Root Canal Curvature Parameters in Mandibular Molars. J Endod. 2018. PMID: 30154004. doi:10.1016/j.joen.2018.07.008

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。