文献速递牙体牙髓病

交联生物聚合物纳米颗粒工程化根管牙本质的力学稳定研究

Microtissue engineering root canal dentine with crosslinked biopolymeric nanoparticles for mechanical stabilization.
PubMed 文献 · Int Endod J · 2018-04-19

本研究采用数字云纹干涉法(DMI)评估根管预备及壳聚糖纳米颗粒交联剂表面工程后根牙本质的应变分布。结果显示,器械去除根管牙本质后应变分布随载荷增加而升高(P < 0.01),交联纳米颗粒工程化后冠部和根尖区应变分布显著降低(P < 0.01),根尖区拉伸应变也显著减少(P < 0.05)。结论提示交联壳聚糖纳米颗粒微组织工程可改善器械处理根管的根应变分布模式。

要点

  • 根管预备去除牙本质后应变分布增加,且随载荷增大而升高。
  • 交联壳聚糖纳米颗粒处理可显著降低冠部与根尖区增高的应变。
  • 根尖区器械后拉伸应变经纳米颗粒处理后显著减少。

核心结论

  • 交联壳聚糖纳米颗粒微组织工程具有改善器械处理根管根应变分布模式的潜力。

研究设计与样本

  • 制备根牙本质标本,复制光栅材料,在定制高分辨率全场云纹干涉装置中测试10-50 N压缩载荷。
  • 在根管扩大前后及壳聚糖纳米颗粒交联剂溶液进行牙本质表面工程后获取数字云纹条纹。
  • 用定制数字图像处理软件分析垂直于牙本质小管方向(U场)和平行于牙本质小管方向(V场)的应变分布。
  • 数据采用趋势分析统计方法,显著性水平0.05。

主要发现

  • 根牙本质中观察到垂直于牙本质小管的明显变形模式。
  • 器械去除根管牙本质后应变分布增加,且随施加载荷增加而升高(P < 0.01)。
  • 交联纳米颗粒工程化的根管牙本质在冠部和根尖区先前增高的应变分布均显著降低(P < 0.01)。
  • 器械处理后平行于牙本质小管方向的根牙本质拉伸应变显著增加(P < 0.01)。
  • 交联纳米颗粒处理后器械根牙本质根尖区形成的拉伸应变显著降低(P < 0.05)。

临床怎么用

  • 对于器械处理后的根管,可考虑采用交联壳聚糖纳米颗粒进行牙本质表面工程以改善应变分布。
  • 该技术目前处于实验研究阶段,临床转化需进一步验证。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

AIM: To evaluate the functional strain distribution pattern in root dentine following canal preparation and root canal surface engineering with crosslinked biopolymeric nanoparticles using digital moiré interferometry (DMI). METHODOLOGY: Root dentine specimens were prepared, grating material replicated and tested for 10-50 N, compressive loads in a customized high-resolution, whole-field moiré interferometry set-up. Digital moiré fringes were acquired to determine the strain distribution pattern at specific regions of interest before and after canal enlargement, and dentine surface engineering with a chitosan nanoparticle crosslinker solution. Fringe patterns were acquired, and strain distribution pattern in the direction perpendicular to dentinal tubules (U-field) and parallel to dentinal tubules (V-field) was analysed with custom digital image-processing software. Data were analysed with a statistical method on trend analysis at 0.05 significant level. RESULTS: Distinct deformation patterns perpendicular to the dentinal tubules were observed in root dentine. Root canal dentine removal following instrumentation resulted in an increase in strain distribution, which increased with an increase in applied loads (P < 0.01). The root canal dentine engineered with crosslinked nanoparticles demonstrated a conspicuous decrease in previously increased strain distribution in both coronal and apical root dentine (P < 0.01). A significant increase in tensile strain in root dentine was observed subsequent to instrumentation in the direction parallel to dentinal tubules (P < 0.01). There was a significant reduction in the tensile strain formed at the apical region of the instrumented root dentine following crosslinked nanoparticle treatment (P < 0.05). CONCLUSIONS: This study highlighted the potential of root canal dentine microtissue engineering with crosslinked chitosan nanoparticle to improve radicular strain distribution patterns in instrumented canals.

来源:Int Endod J,查看原文。版权归原作者所有。

引用

  1. Li FC, Kishen A. Microtissue engineering root canal dentine with crosslinked biopolymeric nanoparticles for mechanical stabilization. Int Endod J. 2018. PMID: 29577345. doi:10.1111/iej.12925

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。