微CT评价三种镍钛系统对长卵圆形根管的成形能力
结果显示三种系统成形能力相似,均显著增加根管体积和表面积,但均无法完全预备长卵圆形根管壁;XP-endo Shaper使根管整体几何形态更趋锥形。
要点
- XP-endo Shaper、iRaCe和EdgeFile对长卵圆形根管的成形能力相似。
- 三种系统预备后根管体积平均增加约52%,表面积增加10.8%-14.2%。
- 三种系统均遗留8.17%-9.83%未预备根管壁,无法完全清理长卵圆形根管。
核心结论
- XP-endo Shaper、iRaCe和EdgeFile系统对下颌切牙长卵圆形根管表现出相似的成形能力。
- XP-endo Shaper使根管整体几何形态显著更趋锥形(SMI=2.59),但三种技术均无法完全预备长卵圆形根管。
研究设计与样本
- 预备前后图像配准后评估体积、表面积、结构模型指数(SMI)、未预备壁、面积、周长、圆度和直径等形态计量学指标。
- 组间比较采用单因素方差分析及Tukey事后检验,组内比较采用配对样本t检验(α=5%)。
主要发现
- 组内预备后所有测试参数均显著增加(P < .05)。
- 组间体积平均增加百分比(约52%)、表面积平均增加百分比(10.8%-14.2%)及剩余未预备根管壁平均百分比(8.17%-9.83%)均无统计学差异(P > .05)。
- XP-endo Shaper组SMI为2.59,显著低于其他组(P < .05),表明根管整体几何形态更趋锥形。
- 预备后根尖5 mm区域的面积、周长、圆度及长短径变化组间无差异(P > .05)。
关键数值与推荐
- 体积平均增加百分比约52%,表面积平均增加百分比10.8%-14.2%,剩余未预备根管壁平均百分比8.17%-9.83%,组间P > .05。
- XP-endo Shaper组SMI=2.59,显著低于其他组(P < .05)。
临床怎么用
- 三种系统均可用于长卵圆形根管的机械预备,成形能力相当。
- XP-endo Shaper可使根管形态更趋锥形,但任何系统均无法完全预备长卵圆形根管,需结合化学冲洗以清理未预备区域。
局限性
- 本研究为体外微CT研究,样本量为每组10颗下颌切牙,结果需结合临床进一步验证。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
INTRODUCTION: This study evaluated the shaping ability of the XP-endo Shaper (FKG Dentaire SA, La Chaux-de-Fonds, Switzerland), iRaCe (FKG Dentaire SA), and EdgeFile (EdgeEndo, Albuquerque, NM) systems using micro-computed tomographic (micro-CT) technology. METHODS: Thirty long oval-shaped canals from mandibular incisors were matched anatomically using micro-CT scanning (SkyScan1174v2; Bruker-microCT, Kontich, Belgium) and distributed into 3 groups (n = 10) according to the canal preparation protocol (ie, XP-endo Shaper, iRaCe, and EdgeFile systems). Coregistered images, before and after preparation, were evaluated for morphometric measurements of the volume, surface area, structure model index (SMI), untouched walls, area, perimeter, roundness, and diameter. Data were statistically compared between groups using the 1-way analysis of variance post hoc Tukey test and within groups with the paired sample t test (α = 5%). RESULTS: Within groups, preparation significantly increased all tested parameters (P < .05). No statistical difference was observed in the mean percentage increase of the volume (〜52%) and surface area (10.8%-14.2%) or the mean percentage of the remaining unprepared canal walls between groups (8.17%-9.83%) (P > .05). The XP-endo Shaper significantly altered the overall geometry of the root canal to a more conical shape (SMI = 2.59) when compared with the other groups (P < .05). After preparation protocols, changes in area, perimeter, roundness, and minor and major diameters of the root canals in the 5 mm of the root apex showed no difference between groups (P > .05). CONCLUSIONS: The XP-endo Shaper, iRaCe, and EdgeFile systems showed a similar shaping ability. Despite the XP-endo Shaper had significantly altered the overall geometry of the root canal to a more conical shape, neither technique was capable of completely preparing the long oval-shaped canals of mandibular incisors.
引用
- Versiani MA, Carvalho KKT, Mazzi-Chaves JF, et al. Micro-computed Tomographic Evaluation of the Shaping Ability of XP-endo Shaper, iRaCe, and EdgeFile Systems in Long Oval-shaped Canals. J Endod. 2017. PMID: 29273492. doi:10.1016/j.joen.2017.09.008
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。