韩国人群下颌第一磨牙远中根双根管形态特征与分类的锥形束CT三维生物测量分析
该研究基于韩国人群1958颗下颌第一磨牙的锥形束CT(CBCT)影像,将远中根双根管形态分为2R2C、1R2C(2-2)和1R2C(2-1)三型,分析根管口间距、颊侧骨板距离及根弯曲特征。结果显示远中根双根管总 prevalence 超过50%,各型间距及骨板距离存在显著差异,且多数与性别相关,左右侧无差异。
要点
- 韩国人群下颌第一磨牙远中根双根管发生率超过50%。
- 远中根双根管分为2R2C、1R2C(2-2)、1R2C(2-1)三型,发生率分别为25.89%、10.32%、14.15%。
- DB-DL根管口间距及根尖至颊侧骨板距离因根管构型而异,多数男性大于女性。
核心结论
- 韩国人群下颌第一磨牙远中根存在2个根管的发生率超过50%。
- DB与DL根管口间距及根尖至颊侧骨板距离因牙根和根管数目及形态而异。
研究设计与样本
- 回顾性影像学研究,评估1958颗下颌第一磨牙的CBCT图像(轴位、冠状位、矢状位及旁矢状位)。
- 将远中根双根管分为2R2C、1R2C(2-2)、1R2C(2-1)三型,测量根管口间距及根尖至颊侧骨板距离,并对DL根弯曲进行三维分类。
- 分析上述特征与性别及左右侧的关系。
主要发现
- 2R2C、1R2C(2-2)、1R2C(2-1)的患病率分别为25.89%、10.32%、14.15%。
- DB-DL根管口间距:2R2C为3.77±0.74 mm,1R2C(2-2)为3.02±0.65 mm,1R2C(2-1)为2.44±0.64 mm。
- 颊侧骨板至DB根管距离:2R2C为3.84±1.35 mm,1R2C(2-2)为5.33±1.41 mm,1R2C(2-1)为5.96±1.63 mm。
- 颊侧骨板至DL根管距离:2R2C为9.85±1.46 mm,1R2C(2-2)为8.28±1.50 mm。
- 所有距离在不同根管构型间差异显著,且多数男性大于女性(P < .05),但1R2C(2-2)的DB-DL间距及所有构型的DB至颊侧骨板距离性别差异不显著(P > .05);左右侧无显著差异(P > .05)。
关键数值与推荐
- 远中根双根管分型标准:2R2C(双根双根管)、1R2C(2-2)(单根双根管双根尖孔)、1R2C(2-1)(单根双根管单根尖孔)。
- DL根弯曲严重程度依据三维重建图像分为III型,III型患病率62.92%。
- DB-DL根管口间距及根尖至颊侧骨板距离的参考值如上(按根管构型列出)。
临床怎么用
- 在韩国人群下颌第一磨牙根管治疗中,应警惕远中根双根管的高发生率(>50%)。
- 术前CBCT评估有助于识别远中根双根管构型,并预判根管口间距及颊侧骨板距离。
- DL根弯曲常见且多朝向颊侧,操作时需注意弯曲方向。
局限性
- 研究仅纳入韩国人群,结论外推需谨慎。
- 样本量为1958颗牙齿,但未报告基于患者的聚类分析。
- 未报告观察者间一致性或测量误差。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
INTRODUCTION: The aim of this study was to determine the morphologic characteristics of mandibular first molars having 2 canals in distal roots. Interorifice distance, buccal bone thickness, and root curvature were evaluated using cone-beam computed tomography images in a Korean population. METHODS: In total, 1958 mandibular first molars were evaluated in axial, coronal, sagittal, and paraxial planes. Distal roots having 2 canals were classified according to their root and canal shapes (2 roots, 2 canals [2R2C]; 1 root, 2 canals with 2 apical foramina [1R2C(2-2)]; and 1 root, 2 canals with 1 apical foramen [1R2C(2-1)]). The distances between orifices and the distance from the apex to the buccal bone plate were measured for each root canal shape (2R2C, 1R2C[2-2], and 1R2C[2-1]). The curvature of distolingual (DL) roots was classified according to severity using 3-dimensional reconstructed images, and the direction of curvature was determined. The relationships of these characteristics to sex and side were evaluated. RESULTS: The prevalences of 2R2C, 1R2C(2-2), and 1R2C(2-1) were 25.89%, 10.32%, and 14.15%, respectively. The distances between distobuccal (DB) and DL orifices were 3.77 ± 0.74 mm for 2R2C, 3.02 ± 0.65 mm for 1R2C(2-2), and 2.44 ± 0.64 mm for 1R2C(2-1). The distances from the buccal plate to the DB canal were 3.84 ± 1.35 mm for 2R2C, 5.33 ± 1.41 mm for 1R2C(2-2), and 5.96 ± 1.63 mm for 1R2C(2-1). The distance from the buccal plate to the DL canal was 9.85 ± 1.46 mm for 2R2C, and 8.28 ± 1.50 mm for 1R2C(2-2). All distances differed significantly according to root canal configurations, and all were greater in men than women (P < .05), except for the DB-DL orifice distance in 1R2C(2-2) and the DB to buccal cortical plate distance in all root configurations (P > .05). No significant difference between the left and right sides was found (P > .05). The prevalence of most severely curved DL roots (type III) was 62.92%, and the direction was commonly toward the buccal side (69.03%). CONCLUSIONS: The prevalence of mandibular first molars having 2 canals in distal roots was more than 50% in a Korean population. Interorifice distances between DB and DL canals and distances from the apex to the buccal cortical plate differed according to root and canal numbers and shapes.
引用
- Kim Y, Roh BD, Shin Y, et al. Morphological Characteristics and Classification of Mandibular First Molars Having 2 Distal Roots or Canals: 3-Dimensional Biometric Analysis Using Cone-beam Computed Tomography in a Korean Population. J Endod. 2017. PMID: 29033084. doi:10.1016/j.joen.2017.08.005
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。