文献速递牙体牙髓病

传统镍钛与新型金合金牙髓器械的侧向与轴向切割效率对比

Lateral and axial cutting efficiency of instruments manufactured with conventional nickel-titanium and novel gold metallurgy.
PubMed 文献 · Int Endod J · 2017-08-17

研究比较设计相同但分别采用传统镍钛合金与热处理金合金制造的两种旋转器械,在塑料和牛牙本质上的侧向与轴向切割效率。共使用258支ProTaper Universal和ProTaper Gold成形器械,在300 rpm下测试。结果金合金器械在塑料侧向切割及牛牙本质部分时间点侧向与轴向切割中效率显著更高(P<0.05),结论为金合金器械切割效率相等或更优。

要点

  • 金合金器械在塑料侧向切割中效率显著高于传统镍钛器械(P<0.05)。
  • S1和S2金合金器械在牛牙本质侧向切割120s和180s时效率显著更高(P<0.05)。
  • 轴向切割中S1和S2金合金器械在塑料180s和牛牙本质120s时效率显著更高(P<0.05)。

核心结论

  • 热处理镍钛金合金器械的切割效率等于或大于传统镍钛器械。

研究设计与样本

  • 共使用258支ProTaper Universal和ProTaper Gold成形器械。
  • 通过弯曲行为评估确定2 N侧向力对应的位移。
  • 测试在300 rpm计算机控制平台上进行。

主要发现

  • 侧向切割中,三种PTG器械在塑料基底上均显著优于PTU(P<0.05)。
  • S1和S2 PTG在牛牙本质基底上120 s和180 s后切割显著更多(P<0.05)。
  • 轴向切割中,S1和S2 PTG在塑料180 s、牛牙本质120 s时效率显著更高(P<0.05)。

临床怎么用

  • 金合金器械在侧向和轴向切割效率上不劣于传统镍钛器械,部分条件下更优。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

AIM: To isolate the effect of metallurgy in lateral and axial cutting efficacy against plastic and bovine dentine substrates by comparing two rotary systems with identical design but manufactured with either conventional nickel-titanium or heat-treated gold alloy. METHODOLOGY: A total of 258 ProTaper Universal (PTU) and ProTaper Gold (PTG) Shaping instruments were used. Bending behaviour was assessed to determine the appropriate displacement associated with a 2 N force in lateral cutting. Ten instruments of each type were used in lateral action for 60 s against bovine dentine or plastic substrates four consecutive times producing four notches in each specimen. Ten further instruments of each type were used in on axial action in four standardized simulated root canals fabricated from 4-mm thick plastic or dentine discs. Both tests were performed at 300 rpm in a computer-controlled testing platform. Notch area and torsional load were compared with Student's t-tests. Repeated measures ANOVA was used to compare cutting efficiency across the four different time-points. Pearson correlation coefficients between substrates were also determined. RESULTS: For lateral action, all three PTG instruments cut significantly more effectively (P < 0.05) than PTU on the plastic substrate. S1 and S2 PTG cut significantly more after 120 and 180 s (P < 0.05) on bovine dentine substrate. For axial action, S1 and S2 PTG were significantly more efficient in cutting at 180 s on plastic and 120 s on bovine dentine (P < 0.05). CONCLUSION: Instruments made from heat-treated nickel-titanium gold alloy had equal or greater cutting efficiency when compared to those made from conventional nickel-titanium.

来源:Int Endod J,查看原文。版权归原作者所有。

引用

  1. Vasconcelos RA, Arias A, Peters OA, et al. Lateral and axial cutting efficiency of instruments manufactured with conventional nickel-titanium and novel gold metallurgy. Int Endod J. 2017. PMID: 28744859. doi:10.1111/iej.12822

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。