文献速递牙体牙髓病

PathFile在狭窄根管预备后的表面变化:体内与体外研究

Surface Changes of PathFile after Glide Path Preparation: An Ex Vivo and In Vivo Study.
PubMed 文献 · J Endod · 2017-07-08

本研究在体内和体外条件下,比较不锈钢手用锉与PathFile在极狭窄上颌磨牙根管建立滑行通道后的表面轮廓变化。结果显示10号K锉在所有测量指标上显著增加,PathFile体外仅凹槽粗糙度显著增加,体内使用3次后各型号粗糙度均显著增加;PathFile表面缺陷显著少于不锈钢锉,提示其在极狭窄根管建立滑行通道可能有益。

要点

  • 10号K锉预备狭窄根管后表面轮廓与粗糙度均显著增加。
  • PathFile体外仅凹槽粗糙度显著增加,切缘无显著变化。
  • PathFile体内使用3次后各型号粗糙度均显著增加。

核心结论

  • PathFile在狭窄根管预备后表面缺陷显著少于不锈钢锉,提示其在极狭窄根管建立滑行通道可能有益。

研究设计与样本

  • 采用体内与体外结合设计,使用不锈钢10号K锉或PathFile系统在上颌磨牙狭窄根管(工作长度仅能容纳8号K锉)建立滑行通道,处理后用非接触激光轮廓仪扫描分析。

主要发现

  • 两种研究中,10号K锉预备第二近中颊根管后所有测量指标(RaCEW、RaCER、SaFR)较对照组显著增加(P < .05)。
  • 体外研究中,PathFile(P1)表面轮廓较基线无显著变化,但凹槽表面粗糙度(SaFR)显著增加(P < .05)。
  • 体内研究中,PathFile使用3次后所有型号的凹槽与切缘粗糙度值较对照显著增加。

关键数值与推荐

  • 狭窄根管定义为工作长度仅能容纳8号K锉的根管。
  • 表面分析指标包括切缘波度(RaCEW)、切缘粗糙度(RaCER)和凹槽表面粗糙度(SaFR)。
  • 统计学显著性水平为P < .05。

临床怎么用

  • 在极狭窄根管建立滑行通道时,PathFile可能减少表面缺陷,但体内重复使用3次后粗糙度显著增加,需关注使用次数对性能的影响。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

INTRODUCTION: The aim of this study was to evaluate the changes in the surface profile of rotary nickel-titanium (NiTi) files designed to prepare a glide path and conventional stainless steel (SS) hand files when used in extremely narrow canals both in clinical and experimental conditions. METHODS: This ex vivo/in vivo study used either SS #10 K hand files or the PathFile system (Dentsply Maillefer, Ballaigues, Switzerland) to establish a glide path in maxillary molars with narrow root canals (defined as canals that bound a #8 K-file at the working length). After treatment, all files were cleaned and scanned using a noncontact laser profilometer. Changes to the surface profile (Ra cutting edge waviness = RaCEW) and roughness (Ra cutting edge roughness = RaCER) of the cutting edges and the surface roughness of the flute area (Sa flute roughness = SaFR) were analyzed. RESULTS: #10 K-files had significant increases in all types of measurements (RaCEW, RaCEW, and SaFR) after the preparation of second mesiobuccal canals compared with the control group (P < .05) in both studies. In the ex vivo study, the PathFile (P1) had no significant changes in the surface profile from baseline but had a significant increase in the surface roughness of the flute (SaFR) (P < .05). PathFiles that were used 3 times in vivo had a significant increase in roughness (flute and cutting edge) values across all PathFile sizes compared with control values. CONCLUSIONS: This study showed that PathFiles had significantly less surface defects compared with SS files after the preparation of narrow canals, indicating their possible benefits when establishing a glide path in extremely narrow canals.

来源:J Endod,查看原文。版权归原作者所有。

引用

  1. Kim Y, Love R, George R, et al. Surface Changes of PathFile after Glide Path Preparation: An Ex Vivo and In Vivo Study. J Endod. 2017. PMID: 28689701. doi:10.1016/j.joen.2017.04.008

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。