单独使用电子工作长度测定对根尖狭窄术后完整性的离体研究
该离体研究将36个牙根随机分为两组,分别单独使用电子工作长度测定(EWLD)与放射学金标准(GS)确定工作长度后行手动根管预备,比较预备终点与根尖狭窄(AC)的距离及AC完整性。结果显示两组距离差异无统计学意义(p>0.401),EWLD组83%的主牙胶尖在最终插入时有回拉感并终止于AC±0.5 mm内,未见AC完整性受损,提示单独使用EWLD可精准预备根尖区。
要点
- 单独使用EWLD与放射学金标准确定工作长度后,预备终点距AC的差异无统计学意义(p>0.401)。
- EWLD组83%有回拉感的主牙胶尖终止于距AC±0.5 mm内。
- EWLD组未见根尖狭窄处最小直径的完整性受损。
核心结论
- 单独使用电子工作长度测定(EWLD)可获得高精度测量,并实现根尖区的精准预备。
研究设计与样本
- 离体研究,将拔除人牙固定在硅胶牙龈模型并配导电介质(藻酸盐)中,分EWLD组与放射学金标准(GS)组行手动根管预备。
- 共对36个牙根尖进行纵向切片,用数码摄影测量预备终点与根尖狭窄(AC)的距离并评估AC术后状态。
主要发现
- GS-AC与EWLD-AC距离差异无统计学意义(p>0.401,Mann-Whitney-U检验)。
- EWLD组中83%的主牙胶尖在最终插入时有回拉感并终止于AC±0.5 mm内。
- EWLD组未观察到根尖狭窄最小直径的完整性受损。
临床怎么用
- 在离体模型中,单独使用EWLD确定工作长度可精准控制预备终点至AC附近并保持AC完整。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
AIM: The present study investigated the accuracy of root canal preparation with regard to the integrity of the apical constriction (AC) using two different working length determination approaches: (1) the electronic method of working length determination (EWLD), and (2) the radiologic "gold standard" method (GS). METHODOLOGY: Simulation models were constructed by arranging extracted human teeth by means of silicon bolstered gingiva masks, along with a conductive medium (alginate). Electronic working length determination (group 1; EWLD) and radiologic plus initial electronic working length determination for posterior comparability (group 2; GS) preceded manual root canal preparation of teeth in both groups. Master cones were inserted according to working lengths obtained from the group specific method. Subsequently, root apices (n=36) were longitudinally sectioned using a diamond-coated bur. The distance between the achieved apical endpoint of the endodontic preparation and the apical constriction (AC) was measured using digital photography. Then, distances between radiologically identified apical endpoints and AC (GS-AC) were compared with the corresponding distances EWLD-AC. Moreover, the postoperative status of the AC was examined with regard to both preparation approaches. RESULTS: Differences between distances GS-AC and EWLD-AC were not statistically significant (p >0.401) (Mann-Whitney-U). Among EWLD samples, 83% of the master cones exhibiting tugback at final insertion terminated close to the apical constriction (±0.5 mm), and no impairment of the minor diameter's integrity was observed. CONCLUSIONS: The sole use of EWLD allowed for a high accuracy of measurements and granted precise preparation of the apical regions.
引用
- Wolgin M, Grundmann MJ, Tchorz JP, et al. Ex vivo investigation on the postoperative integrity of the apical constriction after the sole use of electronic working length determination. J Dent. 2017. PMID: 28642058. doi:10.1016/j.jdent.2017.06.005
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。