文献速递牙体牙髓病

使用K锉、ProGlider锉和G锉对下颌磨牙根管进行滑行路径扩增:预备时间的比较研究

Glide Path Enlargement of Mandibular Molar Canals by Using K-files, the ProGlider File, and G-Files: A Comparative Study of the Preparation Times.
PubMed 文献 · J Endod · 2017-02-09

本研究比较了手动K锉、G锉和ProGlider器械在弯曲根管中预备滑行路径的平均时间。选取90颗下颌磨牙的近中根管(弯曲角度25°至35°),随机分为3组,每组30个根管。结果显示,ProGlider组(27.9±8.6秒)和G锉组(41.9±20.1秒)的滑行路径扩增时间均显著快于不锈钢K锉组(74.9±24.1秒)(P<.05),而ProGlider组与G锉组之间无统计学显著差异(P<.05)。结论认为,旋转器械组的滑行路径预备时间显著快于不锈钢手动K锉。

要点

  • ProGlider组和G锉组的滑行路径预备时间均显著快于不锈钢K锉组。
  • ProGlider组与G锉组之间的平均预备时间无统计学显著差异。
  • 研究选取下颌磨牙近中根管,弯曲角度为25°至35°。

核心结论

  • 使用旋转器械(ProGlider和G锉)进行滑行路径预备的时间显著快于不锈钢手动K锉。

研究设计与样本

  • 研究选取90颗下颌磨牙的近中根管(弯曲角度25°至35°),随机分为3组,每组30个根管,由一名牙髓科医生进行根管预备。
  • 分组为:K锉组使用#10-15-20不锈钢手动K锉;G锉组使用#10不锈钢手动K锉后接#12-17 G锉;ProGlider组使用#10不锈钢手动K锉后接#16 ProGlider器械。
  • 使用电子秒表记录预备滑行路径的总时间,每个根管使用新器械。

主要发现

  • ProGlider组滑行路径扩增时间为27.9±8.6秒,G锉组为41.9±20.1秒,不锈钢K锉组为74.9±24.1秒;方差分析显示ProGlider组和G锉组均显著快于K锉组(P<.05)。
  • ProGlider组与G锉组的平均预备时间之间无统计学显著差异(P<.05)。

临床怎么用

  • 原文未据此给出推荐。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

INTRODUCTION: The preparation of a glide path before the introduction of rotary nickel-titanium instruments is a standard adjunct to ensure increased safety during root canal preparation. The aim of this study was to compare the mean preparation time of manual instrumentation with K-files, G-Files, and the ProGlider instrument to prepare a glide path in curved root canals. METHODS: The mesial canals of 90 mandibular molars (with curvature angles between 25° and 35°) were selected. The specimens were randomly divided into 3 groups with 30 canals each, and canal preparations were performed by an endodontist who used #10-15-20 stainless steel manual K-files (group KF), #10 stainless steel manual K-file followed by #12-17 G-File instruments (group GF), and #10 stainless steel manual K-file followed by #16 ProGlider instrument (group PG). The total time it took to prepare the glide paths was recorded with an electronic stopwatch. New instruments were used for each canal. RESULTS: Glide path enlargement with the PG group (27.9 ± 8.6 seconds) and GF group (41.9 ± 20.1 seconds) was shown to be statistically significantly faster than stainless steel KF group (74.9 ± 24.1 seconds) by using analysis of variance (P < .05). There was no statistically significant difference observed between the mean preparation times of the PG and GF groups (P < .05). CONCLUSIONS: Glide path preparation times with the rotary instrument groups were significantly faster than with stainless steel manual K-files.

来源:J Endod,查看原文。版权归原作者所有。

引用

  1. Paleker F, van der Vyver PJ. Glide Path Enlargement of Mandibular Molar Canals by Using K-files, the ProGlider File, and G-Files: A Comparative Study of the Preparation Times. J Endod. 2017. PMID: 28190589. doi:10.1016/j.joen.2016.11.025

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。