数字化工作流程中整体式种植体冠治疗的时间效率分析:一项随机对照试验
这项随机对照试验纳入20例前磨牙和磨牙区单牙替换患者,比较整体式二硅酸锂加钛基台与氧化锆加饰面瓷两种数字化流程种植冠的时间效率。结果显示,试验组总制作时间75.3分钟显著短于对照组156.6分钟(P=0.0001),椅旁时间和技工室时间均显著缩短,整体治疗成本降低超过30%。
要点
- 试验组总制作时间75.3分钟,显著短于对照组156.6分钟(P=0.0001)。
- 试验组椅旁时间20.8分钟,显著短于对照组24.1分钟(P=0.001)。
- 试验组技工室时间54.5分钟,显著短于对照组132.5分钟(P=0.0001)。
核心结论
- 试验组工作流程在种植体支持冠的时间效率上优于对照组,整体式二硅酸锂加钛基台的数字化制作步骤可有效缩短技工室制作时间,使整体治疗成本降低超过30%。
研究设计与样本
- 随机对照试验,纳入20例前磨牙和磨牙区单牙替换患者,随机分为试验组10例和对照组10例。
- 试验组采用CAD/CAM制作的整体式二硅酸锂冠粘接于预制钛基台,不使用实体模型;对照组采用CAD/CAM制作的氧化锆上部结构加手工分层饰面瓷,并使用研磨主模型。
- 所有患者均接受穿合面螺丝固位的软组织水平型种植体修复,通过口内光学扫描获取种植体三维位置。
主要发现
- 所有种植冠均需两次临床预约完成口内光学扫描和戴入。
- 平均总制作时间(临床加技工室工作步骤之和)试验组为75.3分钟(SD±2.1),对照组为156.6分钟(SD±4.6),差异有统计学意义(P=0.0001)。
- 临床治疗环节的平均椅旁时间试验组为20.8分钟(SD±0.3),对照组为24.1分钟(SD±1.1),差异有统计学意义(P=0.001)。
- 平均技工室工作时间试验组为54.5分钟(SD±4.9),对照组为132.5分钟(SD±8.7),差异有统计学意义(P=0.0001)。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVES: The aim of the randomized controlled trial was to analyze time-efficiency of a treatment with implant crowns made of monolithic lithium disilicate (LS2) plus titanium base vs. porcelain fuse to zirconium dioxide (ZrO2 ) in a digital workflow. MATERIALS AND METHODS: Twenty study participants were included for single-tooth replacement in premolar and molar sites. Baseline was the start of the prosthetic treatment. All patients received transocclusal screw-retained implant reconstructions on a soft tissue level-type implant. The 3D implant position was captured with intraoral optical scanning (IOS). After randomization, ten patients were restored with CAD-/CAM-produced monolithic LS2-crowns bonded to prefabricated titanium abutments without any physical models (test), and ten patients with CAD-/CAM-fabricated ZrO2 -suprastructures and hand-layered ceramic veneering with milled master models (control). Every single clinical and laboratory work step was timed in minutes and then analyzed for time-efficiency with Wilcoxon Rank Sum Tests. Direct costs were assessed for laboratory fees for first line production in Swiss Francs (CHF). RESULTS: Two clinical appointments were necessary for IOS and seating of all implant crowns. The mean total production time, as the sum of clinical plus laboratory work steps, was significantly different, resulting in 75.3 min (SD ± 2.1) for test and 156.6 min (SD ± 4.6) for control [P = 0.0001]. Analysis for clinical treatment sessions showed a significantly shorter mean chair time for the complete digital workflow of 20.8 min (SD ± 0.3) compared to 24.1 min (SD ± 1.1) [P = 0.001]. Even more obvious were the results for the mean laboratory work time with a significant reduction of 54.5 min (SD ± 4.9) vs. 132.5 min (SD ± 8.7), respectively [P = 0.0001]. CONCLUSION: The test workflow was more time-efficient than the controls for implant-supported crowns; notably, laboratory fabrication steps could be effectively shortened with the digital process of monolithic LS2 plus titanium base resulting in more than 30% reduced overall treatment costs.
引用
- Joda T, Brägger U. Time-efficiency analysis of the treatment with monolithic implant crowns in a digital workflow: a randomized controlled trial. Clin Oral Implants Res. 2016. PMID: 27796072. doi:10.1111/clr.12753
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。