文献速递口腔修复与种植

点云变形算法联合生成式AI优化鼻赝复体自动构建

[Evaluation of nasal prosthesis automatic construction integrating a flexible point cloud deformation matching algorithm and generative artificial intelligence].
PubMed 文献 · Zhonghua Kou Qiang Yi Xue Za Zhi · 2026-01-01

研究开发局部投影变形匹配算法LPD-Match,与FMGen-Net模型联合,基于20例无面部畸形受试者的三维面部扫描模拟全鼻缺损数据,配对比较两种方法构建的鼻赝复体目标参照数据。结果显示联合方法在边缘密合度和形态相似性上均显著优于单用FMGen-Net,初步验证其可行性和有效性。

要点

  • LPD-Match联合FMGen-Net可显著改善鼻赝复体边缘移行效果
  • 联合方法在保持良好形态修复的同时优化边缘密合度
  • 该技术路线有望用于临床口腔修复中鼻缺损的个性化数字重建

核心结论

  • LPD-Match算法结合FMGen-Net模型可在达到理想边缘移行效果的同时改善鼻赝复体形态。
  • 初步验证了使用点云非刚性变形算法优化鼻赝复体边缘移行的可行性和有效性。

研究设计与样本

  • 基于局部投影变形策略开发LPD-Match算法。
  • 收集2023年2至11月北京大学口腔医学院·口腔医院修复科初诊的20例面部无明显畸形患者的三维颜面扫描数据,模拟构建全鼻缺损数据。
  • 设计配对实验,每例数据分别用FMGen-Net单独构建(对照组)和FMGen-Net联合LPD-Match构建(实验组)目标参照数据。

主要发现

  • 边缘密合度:对照组三维曲线偏差均方根误差为(0.62±0.23)mm,实验组为(0.16±0.07)mm。
  • 边缘密合度:对照组最大曲线偏差为(1.57±0.64)mm,实验组为(0.52±0.30)mm,组间差异有统计学意义(t=11.33,P<0.001;t=10.17,P<0.001)。
  • 形态相似性:对照组三维形态偏差均方根误差为1.30(1.00,1.83)mm,实验组为1.23(0.90,1.63)mm。
  • 形态相似性:对照组最大形态偏差为4.26(2.96,5.02)mm,实验组为3.85(2.92,4.56)mm,组间差异有统计学意义(Z=-3.40,P<0.001;Z=-2.09,P=0.037)。

临床怎么用

  • 该联合方法可用于口腔修复中鼻缺损的个性化数字重建,提升赝复体边缘移行与形态修复效果。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

Objective: To develop a point cloud non-rigid deformation algorithm, local projection deformation match (LPD-Match), for optimizing the edge transition of the nasal prosthesis complementing the generative artificial intelligence-based facial mesh generation network (FMGen-Net) model previously developed by the research team to automate the construction of target reference data for the nasal prosthesis. Methods: The LPD-Match algorithm was developed based on the local projection deformation strategy. Three-dimensional facial scans from 20 subjects without significant facial deformities who first visited the Department of Prosthodontics, Peking University School and Hospital of Stomatology, between February 2023 and November 2023 were collected, and full nasal defect data were simulated on these scans. To evaluate the effectiveness of LPD-Match algorithm in edge transition optimization, a paired experiment was designed. For each model, two methods for constructing target reference data were compared. The control group utilized FMGen-Net alone, while the experimental group integrated FMGen-Net with the LPD-Match algorithm. The "edge fitness" metric was defined to evaluate the edge transition of the prosthesis by calculating the three-dimensional (3D) curve deviation and maximum curve deviation between the defect boundary curve and the prosthesis boundary curve. Additionally, the "morphological similarity" metric was introduced to assess the morphology restoration of the target reference data.Using the nasal region data from the original three-dimensional facial scans as the gold standard, the root mean square error of the three-dimensional morphological deviation and the maximum morphological deviation between the prosthesis design data and the gold standard were calculated for both groups. Results: Analysis of the "edge fitness" metric showed that the root mean square error of the 3D curve deviation in the control group averaged (0.62±0.23) mm, whereas in the experimental group, it was (0.16±0.07) mm. The maximum curve deviation in the control group averaged (1.57±0.64) mm, while the experimental group showed a reduced value of (0.52±0.30) mm. Statistical analysis showed significant differences between the two groups (t=11.33, P0.001; t=10.17, P0.001), with the experimental group showing superior edge transition. For the "morphological similarity" analysis, the root mean square error of the 3D morphology deviation was 1.30 (1.00, 1.83) mm in the control group and 1.23 (0.90, 1.63) mm in the experimental group. The maximum morphology deviation in the control group was 4.26 (2.96, 5.02) mm, while the experimental group demonstrated 3.85 (2.92, 4.56) mm. Statistical testing showed significant differences between the two groups (Z=-3.40, P0.001; Z=-2.09, P=0.037), indicating the superior morphological restoration effect of the experimental group. Conclusions: This study proposes a method using point cloud non-rigid deformation algorithms to optimize the edge transition of the nasal prosthesis and the preliminary verification demonstrates its feasibility and effectiveness. Compared with FMGen-Net model alone, the combined method integrating LPD-Match algorithm with FMGen-Net model improved the edge fitness of nasal prosthesis target reference data while maintaining favorable morphological reconstruction performance.The proposed method shows potential for personalized digital reconstruction of nasal defects in clinical prosthodontics. 目的: 建立一种基于局部投影变形策略的点云柔性变形匹配(LPD-Match)算法优化鼻赝复体的边缘移行,并将其作为课题团队前期研究中建立的生成式人工智能面部网格生成网络(FMGen-Net)模型的有益补充,以实现鼻赝复体数据的自动构建。 方法: 基于局部投影变形策略建立LPD-Match算法。收集2023年2至11月于北京大学口腔医学院·口腔医院修复科初诊的20例面部无明显畸形的牙体缺损或牙列缺损患者的三维颜面扫描数据,模拟构建全鼻缺损数据。为评价LPD-Match算法的优化效果,设计配对实验:对每例全鼻缺损数据采用两种方法进行目标参照数据构建,以FMGen-Net模型构建的目标参照数据为对照组,以FMGen-Net模型结合LPD-Match算法构建的目标参照数据为实验组。使用边缘密合度评价目标参照数据中鼻赝复体数据的边缘移行效果,通过计算缺损边界曲线与赝复体边界曲线之间的三维曲线偏差及最大曲线偏差进行分析。使用形态相似性评价目标参照数据的鼻形态修复效果,以患者三维颜面扫描数据中的鼻部数据为金标准,分别计算两组鼻赝复体数据与金标准之间的三维形态偏差及最大形态偏差。 结果: 边缘密合度结果显示,对照组三维曲线偏差的均方根误差值为(0.62±0.23)mm,实验组为(0.16±0.07)mm;对照组最大曲线偏差为(1.57±0.64)mm,实验组为(0.52±0.30)mm,实验组鼻赝复体数据的边缘移行效果均显著优于对照组(t=11.33,P0.001;t=10.17,P0.001)。形态相似性结果显示,对照组三维形态偏差的均方根误差值为1.30(1.00,1.83)mm,实验组为1.23(0.90,1.63)mm;对照组最大形态偏差为4.26(2.96,5.02)mm,实验组为3.85(2.92,4.56)mm;实验组目标参照数据的鼻形态修复效果均显著优于对照组(Z=-3.40,P0.001;Z=-2.09,P=0.037)。 结论: 本项研究提出使用LPD-Match算法优化赝复体边缘移行效果的技术路线,初步验证LPD-Match算法在赝复体边缘移行优化方面的可行性和有效性。LPD-Match算法结合FMGen-Net模型构建鼻赝复体数据的方法,可在达到理想的边缘移行效果的同时,进一步改善鼻赝复体形态。.

来源:Zhonghua Kou Qiang Yi Xue Za Zhi,查看原文。版权归原作者所有。

引用

  1. Guo SW, Qin QZ, Li YL, et al. [Evaluation of nasal prosthesis automatic construction integrating a flexible point cloud deformation matching algorithm and generative artificial intelligence]. Zhonghua Kou Qiang Yi Xue Za Zhi. 2026. PMID: 42394555. doi:10.3760/cma.j.cn112144-20260207-00106

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。