文献速递口腔修复与种植

准确性是行为而非数字:全牙弓种植扫描的计量学报告框架

Accuracy is a behavior, not a number: a metrological reporting framework for complete-arch implant scanning.
PubMed 文献 · J Dent · 2026-05-25

本文针对全牙弓种植扫描研究,提出一个计量学报告框架,以提升跨研究可比性和修复相关解读。通过批判性审视常用准确性终点并结合ISO计量学术语和刚性多种植体就位的修复需求,提出四个互补报告域。结论认为全牙弓种植扫描准确性无法由单一数值终点完全描述。

要点

  • 全局表面偏差应在明确声明的刚性配准后报告,并指定对齐面和比较面。
  • 位点特异性偏差应报告每个种植体、扫描杆或多单元基台区域,无需局部最佳拟合。
  • 种植体位姿误差应报告平移和角度偏差,优先在种植体平台或MUA水平。

核心结论

  • 全牙弓种植扫描准确性无法由单一数值终点完全描述。
  • 结构化计量学框架有助于区分全局表面一致性、种植体水平位置误差和临床相关拟合差异。

研究设计与样本

  • 本文为方法学框架提案,批判性审视全牙弓种植扫描研究中常用准确性终点,并结合ISO计量学术语和刚性多种植体就位的修复需求进行解读。

主要发现

  • 提出四个互补报告域:全局表面偏差、位点特异性偏差、种植体位姿误差和拟合相关或感兴趣区域描述符。
  • 建议透明报告参考数据、预处理、配准策略、测量区域、色图设置和统计单元。

关键数值与推荐

  • 全局表面偏差应在明确声明的刚性配准后报告,并指定对齐面和比较面。
  • 位点特异性偏差应报告每个种植体、扫描杆或多单元基台区域,无需在每个位点重复局部最佳拟合对齐。
  • 种植体位姿误差应报告为平移和角度偏差,优先在种植体平台或MUA水平(当信息可用时)。
  • 拟合相关或感兴趣区域描述符应描述临床相关局部差异,优先采用稳健的上尾和离散度指标,如第95百分位绝对偏差和标准差。

临床怎么用

  • 临床解读全牙弓种植扫描研究时,应关注配准策略、测量区域、位姿误差和拟合相关描述符的清晰报告,以减少非等效结果造成的混淆。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVES: To propose a metrological reporting framework for complete-arch implant scanning studies, with the aim of improving cross-study comparability and prosthetically relevant interpretation. METHODS: Commonly reported accuracy endpoints in complete-arch implant scanning studies were critically examined and interpreted in relation to International Organization for Standardization (ISO) metrology terminology and the prosthetic requirement for rigid multi-implant seating. RESULTS: Four complementary reporting domains are proposed. First, global surface deviation should be reported after a clearly declared rigid registration, specifying both the alignment surface and the comparison surface. Second, site-specific deviation should be reported for each implant, scan body, or multi-unit abutment (MUA) region without repeating a local best-fit alignment at each site. Third, implant pose error should be reported as translational and angular deviation, preferably at the implant platform or MUA level when this information is available. Fourth, fit-related or region-of-interest descriptors should be used to describe clinically relevant local discrepancy, with preference for robust upper-tail and dispersion metrics such as the 95th percentile absolute deviation and standard deviation. Transparent reporting of reference data, preprocessing, registration strategy, measurement region, color-map settings, and statistical unit is also recommended. CONCLUSIONS: Complete-arch implant scanning accuracy cannot be fully described by a single numerical endpoint. A structured metrological framework may help distinguish global surface agreement, implant-level positional error, and clinically relevant fit-related discrepancy. CLINICAL SIGNIFICANCE: Clearer reporting of alignment strategy, measurement region, pose error, and fit-related descriptors may reduce confusion caused by non-equivalent outcomes and support more clinically meaningful interpretation of complete-arch implant scanning studies.

来源:J Dent,查看原文。版权归原作者所有。

引用

  1. Ruggiero G, Sorrentino R, Zarone F, et al. Accuracy is a behavior, not a number: a metrological reporting framework for complete-arch implant scanning. J Dent. 2026. PMID: 42190742. doi:10.1016/j.jdent.2026.106791

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。