文献速递牙体牙髓病

亲水聚合物改性PCL/HA三维打印支架促进牙髓再生

Hydrophilic Polymer-Modified Poly(ε-caprolactone)/Hydroxyapatite Three-dimensional-Printed Scaffolds with Enhanced Hydrophilicity and Biodegradability for Regenerative Endodontic Applications.
PubMed 文献 · J Endod · 2026-03-27

本研究通过熔融沉积建模3D打印制备不同PCL/HA/P407配比的 disc 形支架(孔隙率约65%),在保持机械强度的同时显著提升亲水性与降解性;最优P407浓度(PHP2)促进人牙髓干细胞黏附、增殖及成骨/成牙本质分化,提示该复合支架可作为牙本质-牙髓复合体再生的候选平台。

要点

  • P407改性PCL/HA支架显著改善亲水性和降解性,且维持机械强度。
  • 最优P407浓度(PHP2)促进hDPSCs黏附、增殖和矿化基质形成,无细胞毒性。
  • 该支架有潜力用于牙本质-牙髓复合体再生及其他再生牙髓应用。

核心结论

  • P407改性PCL/HA复合支架兼具机械稳定性、增强的亲水性和可调降解性,支持hDPSCs良好响应,有望用于牙本质-牙髓复合体再生。

研究设计与样本

  • 通过基于熔融沉积建模的3D打印制备孔隙率约65%的圆片状支架,设置P、PH、PHP1、PHP2和PHP3不同PCL/HA/P407配比。
  • 采用流变学、接触角测量、降解测试、场发射扫描电镜、热重/差热分析、压缩测试和傅里叶变换红外光谱分析理化及生物学性能。
  • 培养人牙髓干细胞(hDPSCs),通过碱性磷酸酶活性和茜素红S染色评估细胞黏附、增殖及成骨/成牙本质分化。

主要发现

  • P407掺入显著增强支架亲水性和降解性,同时维持机械强度。
  • 最优P407浓度(PHP2)改善hDPSCs黏附、增殖和矿化基质形成,且无细胞毒性。
  • 碱性磷酸酶活性升高和钙沉积增加表明微环境有利于早期成骨/成牙本质分化。

关键数值与推荐

  • 支架孔隙率约为65%。

临床怎么用

  • 该P407改性PCL/HA三维打印支架可作为牙本质-牙髓复合体再生的候选生物活性平台。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

INTRODUCTION: Poly(ε-caprolactone) (PCL) is widely used as a scaffold material for tissue regeneration; however, its intrinsic hydrophobicity and slow biodegradation limit cell adhesion and tissue remodeling. This study aimed to improve the hydrophilicity and biodegradability of PCL-based scaffolds by incorporating the hydrophilic polymer poloxamer 407 (P407) while maintaining mechanical stability through hydroxyapatite (HA) reinforcement. The composite system was designed as a bioactive platform for dentin-pulp complex regeneration and other regenerative endodontic applications. METHODS: Disc-shaped scaffolds with approximately 65% porosity were fabricated via fused deposition modeling-based 3D printing at varying PCL/HA/P407 ratios (P, PH, PHP1, PHP2, and PHP3). Physicochemical and biological properties-including printability, hydrophilicity, degradation, and mechanical strength-were analyzed using rheology, contact angle measurement, degradation testing, field-emission scanning electron microscopy, thermogravimetric/differential thermal analysis, compressive testing, and Fourier transform infrared spectroscopy. Human dental pulp stem cells (hDPSCs) were cultured to assess cell adhesion, proliferation, and osteo/odontogenic differentiation through alkaline phosphatase activity and alizarin red S staining. RESULTS: P407 incorporation significantly enhanced scaffold hydrophilicity and degradation while maintaining mechanical strength. The optimal P407 concentration (PHP2) showed improved hDPSCs adhesion, proliferation, and mineralized matrix formation without cytotoxicity. Increased alkaline phosphatase activity and calcium deposition indicated a favorable microenvironment for early osteo/odontogenic differentiation. CONCLUSION: The P407-incorporated PCL/HA composite scaffold exhibited balanced mechanical stability, enhanced hydrophilicity, and tunable biodegradability, supporting favorable hDPSCs responses. These results suggest its potential as a promising scaffold for dentin-pulp complex regeneration and broader tissue engineering applications in regenerative endodontics.

来源:J Endod,查看原文。版权归原作者所有。

引用

  1. Kim YR, Kim YS, Kang JH, et al. Hydrophilic Polymer-Modified Poly(ε-caprolactone)/Hydroxyapatite Three-dimensional-Printed Scaffolds with Enhanced Hydrophilicity and Biodegradability for Regenerative Endodontic Applications. J Endod. 2026. PMID: 41905722. doi:10.1016/j.joen.2026.03.014

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。