不同根管充填技术对中三分之一根管内吸收封闭的填充能力:体外研究
本研究基于锥形束微计算机断层扫描数据3D打印30颗上颌中切牙,在中三分之一设计内吸收,随机分为刚性载体技术组、热垂直加压技术组和生物陶瓷单尖技术组各10颗,术后微CT量化树脂体积。结果显示各组在根管、吸收腔、根体及残留树脂体积上差异有统计学意义。热垂直加压技术与生物陶瓷单尖技术封闭能力相当,均优于GuttaCore载体技术。
要点
- 热垂直加压与生物陶瓷单尖技术对中三分之一内吸收的封闭能力相当。
- GuttaCore刚性载体技术在中三分之一内吸收的填充能力劣于上述两种技术。
- 体外3D打印模型可用于比较不同充填技术对内吸收的封闭效果。
核心结论
- 热垂直加压技术对中三分之一根管内吸收的封闭能力与生物陶瓷单尖技术相当,且两者均优于GuttaCore刚性载体技术。
研究设计与样本
- 体外研究,基于锥形束微计算机断层扫描数据3D打印30颗上颌中切牙并设计根管中三分之一内吸收,随机分为三组各10颗。
主要发现
- 方差分析显示不同充填技术在根管、吸收腔「球体」、根体及残留树脂体积(mm³)上差异有统计学意义(P = .0001, P = .0001, P = .0065, P < .0001)。
临床怎么用
- 对于根管中三分之一内吸收病例,可优先考虑热垂直加压或生物陶瓷单尖技术进行充填。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
INTRODUCTION: The aim of this study was to compare the filling ability of different root canal obturation techniques for the sealing of internal root resorption (IRR) located in the middle root canal third. METHODS: Thirty maxillary central incisors were printed based on the standard tessellation language digital file obtained from a preoperative cone beam micro-computed tomography, which was edited to design IRRs in the middle root canal third (n = 30). Subsequently, the group was randomly subdivided according to the following obturation techniques: Group A: rigid carrier-based technique (n = 10) (GuttaCore); Group B: warm vertical condensation technique (n = 10) (Calamus); and Group C: single-cone technique with bioceramic cement (n = 10) (Bioceramic). Subsequently, postoperative micro-computed tomography scans were performed and extracted files were quantified using Fiji/ImageJ software The following volumetric parameters were quantified: channel resin volume (mm3), IRR "sphere" resin volume (mm3), "root" volume (without sphere) (mm3), residual resin volume (mm3) and total resin volume (mm3). Differences among the root canal filling techniques were evaluated using analysis of variance (ANOVA). RESULTS: ANOVA revealed statistically significant differences in the resin penetration volumes between the different obturation techniques evaluated for the "channel," resorptive cavity "sphere," "root," and "residual" resin volumes (mm³) (P = .0001, P = .0001, P = .0065, and P < .0001, respectively). CONCLUSIONS: The warm vertical condensation technique demonstrated a sealing ability comparable to that of the single-cone bioceramic technique in cases of IRR located in the middle third of the root canal system, as well as the overall root canal system, when compared to the GuttaCore carrier-based obturation technique.
引用
- García-Gavilá TB, Ruiz-Sánchez C, Gutiérrez Ortega C, et al. Filling Capability of Different Obturation Techniques for the Sealing of Internal Root Resorption Located in the Middle Root Canal Third - An In Vitro Study. J Endod. 2026. PMID: 41887501. doi:10.1016/j.joen.2026.03.010
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。