文献速递牙体牙髓病

四种引导技术用于钙化根管开髓的精度与效率:新型3D打印模型的体外研究

Accuracy and Efficiency of 4 Guided Techniques for Calcified Canal Access: An In Vitro Study with a Novel 3D-printed Model.
PubMed 文献 · J Endod · 2026-03-09

本研究利用自设计可重复使用的3D打印钙化根管模型,比较徒手、静态导航、动态导航与机器人辅助导航四种开髓方法的精度与效率。共使用192个树脂模型,由专家和无经验操作者分别在上颌和下颌模型上操作。结果显示机器人辅助导航整体表现最佳,角度偏差1.31±0.32°、操作时间12±2 s、牙体组织损失9.03±0.57 mm3,且能缩小操作者经验差距并补偿下颌解剖困难。

要点

  • 机器人辅助导航在角度偏差、操作时间和牙体组织损失上均优于其他三种方法。
  • 机器人辅助导航使新手操作者达到专家水平,并保证上下颌模型精度一致。
  • 自设计3D打印钙化根管模型具有良好耐磨性和可重复使用性。

核心结论

  • 以机器人辅助导航为中心的数字系统推动牙髓治疗向精准、微创和标准化发展,为钙化根管处理提供有前景的临床选择。

研究设计与样本

  • 体外研究,使用自设计可重复使用的3D打印钙化根管模型,共192个树脂模型,由专家和无经验操作者分别在上颌和下颌模型上操作。

主要发现

  • 四种方法间差异有统计学意义(P < .05)。
  • 机器人辅助导航角度偏差为1.31±0.32°,操作时间为12±2 s,牙体组织损失为9.03±0.57 mm3,整体表现最佳,其次为静态导航组,徒手组表现最差。
  • 机器人辅助导航显著缩小操作者间经验差距,使新手操作者达到专家水平(P < .05),并补偿下颌解剖困难,确保上下颌模型精度一致(P < .05)。

关键数值与推荐

  • 机器人辅助导航:角度偏差1.31±0.32°,操作时间12±2 s,牙体组织损失9.03±0.57 mm3。
  • 四种方法间比较P < .05;机器人辅助导航缩小经验差距和补偿下颌解剖困难的比较均P < .05。

临床怎么用

  • 机器人辅助导航可提高钙化根管开髓的精度和效率,并降低对操作者经验的依赖。
  • 自设计3D打印模型可用于钙化根管开髓技术的标准化训练和评估。

局限性

  • 本研究为体外研究,使用树脂模型,结论需进一步临床验证。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

INTRODUCTION: Pulp canal calcification (PCC) remains a significant clinical challenge in root canal treatment. This in vitro study used a self-designed reusable 3D-printed calcified root canal model to evaluate the accuracy and efficiency of four PCC access preparation methods: freehand, static navigation, dynamic navigation, and robot-assisted (RA) navigation. METHODS: The study utilized a self-designed 3D-printed model that simulates the clinical characteristics of PCC and achieves precise positioning. A total of 192 resin models were used, and 4 cavity preparation methods were performed by specialists and inexperienced operators on maxillary and mandibular models, respectively. Using 3D reconstruction technology, the differences in offset angle, operation time, and tooth tissue loss among the groups were compared. RESULTS: A reusable, standardized PCC model was successfully fabricated. Significant differences were observed among the four methods (P < .05). RA demonstrated the best overall performance, with an angular deviation of 1.31 ± 0.32°, an operation time of 12 ± 2 s, and a tooth substance loss of 9.03 ± 0.57 mm3, followed by the static navigation group, while freehand was the poorest performer. RA significantly narrowed the experience gap among operators, enabling novice operators to reach the expert level (P < .05) and compensated for mandibular anatomical difficulties, ensuring consistent accuracy between maxillary and mandibular models (P < .05). CONCLUSIONS: The self-designed PCC model has excellent wear resistance and reusability, and the RA-centered digital system advances endodontic treatment toward precision, minimal invasiveness, and standardization. It provides a promising clinical option for PCC management.

来源:J Endod,查看原文。版权归原作者所有。

引用

  1. Shi Y, Yan M, Sun Q, et al. Accuracy and Efficiency of 4 Guided Techniques for Calcified Canal Access: An In Vitro Study with a Novel 3D-printed Model. J Endod. 2026. PMID: 41812760. doi:10.1016/j.joen.2026.03.002

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。