文献速递口腔修复与种植

氧化锆、树脂复合材料与二硅酸锂贴面在增材与减材工艺下的精度和固位力体外研究

Accuracy and retention of laminate veneers made from zirconia, resin composite, and lithium disilicate using additive and subtractive techniques: An in vitro study.
PubMed 文献 · J Dent · 2025-10-08

本体外研究以标准化上颌中切牙预备体制作80个贴面,比较四种CAD-CAM材料-工艺组合的精度与固位力。结果显示材料类型和制造方法显著影响适合性与固位,增材氧化锆、减材氧化锆和减材二硅酸锂表现相当且临床可接受,而增材树脂复合材料精度和固位较差。

要点

  • 增材氧化锆、减材氧化锆与减材二硅酸锂的精度和固位力相当。
  • 增材树脂复合材料内部RMS值最高且固位力最低。
  • 打印树脂复合材料宜限于临时修复应用。

核心结论

  • 材料类型和制造方法显著影响贴面的适应性和固位力。
  • 增材氧化锆、减材氧化锆和减材二硅酸锂表现相当且临床可接受。
  • 增材树脂复合材料精度和固位力较差,应限于临时应用。

研究设计与样本

  • 体外研究,使用标准化上颌中切牙预备体制作80个贴面,每组20个。
  • 分组为增材树脂复合材料、增材氧化锆、减材先进二硅酸锂和减材氧化锆。
  • 通过RMS偏差值和彩色图评估精度,热机械老化后测试固位力。
  • 采用单因素方差分析和Tukey HSD检验,α=0.05。

主要发现

  • 各组间精度和固位力存在显著差异(p<0.005)。
  • 增材树脂复合材料内部RMS值最高(38.32 ±2.2 µm),固位力最低(689.85 ±30.81 N)。
  • 减材氧化锆内部RMS值30.12 ±2.4 µm,固位力782.10 ±34.12 N。
  • 减材二硅酸锂内部RMS值31.85 ±2.3 µm,固位力801.90 ±39.43 N。
  • 增材氧化锆内部RMS值32.45 ±2.5 µm,固位力799.45 ±33.83 N,与减材组无显著差异。

临床怎么用

  • 减材二硅酸锂、减材氧化锆和增材氧化锆可用于最终贴面修复。
  • 打印树脂复合材料应限于临时修复。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVES: To evaluate and compare the trueness and retention of laminate veneers (LVs) fabricated using four different CAD-CAM material-process combinations, including both additive (AM) and subtractive (SM) manufacturing techniques. METHODS: An in vitro study was conducted using a standardized maxillary central incisor preparation. Eighty LVs were fabricated (n=20/group) from: AM resin composite (AM-RC), AM zirconia (AM-Z), SM advanced lithium disilicate (SM-LDS), and SM zirconia (SM-Z). Trueness was assessed using root mean square (RMS) deviation values and color map visualization. Retention was tested after thermomechanical aging. One-way ANOVA and Tukey's HSD test were used for statistical analysis (α=0.05). RESULTS: There were significant differences in trueness and retention among groups (p<0.005). AM-RC showed the highest RMS values (e.g., internal: 38.32 ±2.2 µm) and the lowest retention (689.85 ±30.81 N). No significant differences in trueness or retention were found between SM-Z (internal: 30.12 ±2.4 µm; 782.10 ±34.12 N), SM-LDS (internal: 31.85 ±2.3 µm; 801.90 ±39.43 N), and AM-Z (internal: 32.45 ±2.5 µm; 799.45 ±33.83 N). CONCLUSIONS: The material type and manufacturing method significantly influenced the adaptation and retention of LVs. AM-Z, SM-Z, and SM-LDS demonstrated comparable and clinically acceptable outcomes, while AM-RC showed inferior trueness and retention. CLINICAL RELEVANCE: Subtractive lithium disilicate and zirconia, as well as high-performance additive zirconia, exhibited clinically acceptable adaptation and retention, supporting their use in definitive laminate veneers. In contrast, printed resin composite showed inferior performance and should be limited to provisional applications.

来源:J Dent,查看原文。版权归原作者所有。

引用

  1. Sasany R, Çakmak G, Mosaddad SA, et al. Accuracy and retention of laminate veneers made from zirconia, resin composite, and lithium disilicate using additive and subtractive techniques: An in vitro study. J Dent. 2025. PMID: 41072901. doi:10.1016/j.jdent.2025.106153

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。