文献速递牙体牙髓病

基于优化点云配准策略的机器人根管定位精度:一项体外研究

Accuracy of Robotic Root Canal Localization Using Optimized Point Cloud Registration Strategies: An In Vitro Study.
PubMed 文献 · J Endod · 2025-10-27

本研究用3D打印下颌牙模型比较点云配准与基准点配准用于机器人根管定位的精度。点云组在前牙舌面和后牙咬合面取点云时配准误差最低;其基准配准误差显著低于基准点组,靶点配准误差及入点、根尖、角度偏差与基准点组相当。该策略精度高、可行。

要点

  • 前牙舌面、后牙咬合面点云配准误差最低(P < .05)
  • 点云组基准配准误差显著低于基准点组(P < .05)
  • 点云组入点、根尖、角度偏差分别为0.25 ± 0.08 mm、0.29 ± 0.06 mm、1.34 ± 0.81°

核心结论

  • 采用前牙舌面与后牙咬合面点云的配准策略精度高,可用于机器人根管定位,并可能提升配准精度与临床效率。

研究设计与样本

  • 体外研究,使用3D打印下颌牙模型,按配准方法分为点云组(PCG)和基准点组(FPG)。
  • FPG制备基准点和靶点,PCG仅制备靶点;经锥形束CT成像和口内扫描后分别配准,PCG从不同牙面获取点云。
  • 通过计算基准配准误差和靶点配准误差评估配准精度,随后机器人系统在各组执行根管定位并测量入点、根尖和角度偏差。
  • 统计采用独立样本t检验和单因素方差分析。

主要发现

  • PCG在前牙获取舌面点云、后牙获取咬合面点云时配准误差最低(P < .05)。
  • 与FPG相比,PCG的基准配准误差显著更低(P < .05),而靶点配准误差相当(P > .05)。
  • PCG中机器人系统的入点偏差为0.25 ± 0.08 mm、根尖偏差为0.29 ± 0.06 mm、角度偏差为1.34 ± 0.81°,与FPG相当(P > .05)。

临床怎么用

  • 机器人根管定位配准时可优先采集前牙舌面和后牙咬合面的点云,以降低配准误差。
  • 该点云配准策略的定位偏差与基准点法相当,可作为简化传统配准流程的候选方案。

局限性

  • 研究为体外3D打印下颌牙模型实验,未在临床患者中验证。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

INTRODUCTION: Traditional registration process of robotic root canal localization remains cumbersome. This study aimed to determine optimal point cloud registration strategies for robotic root canal localization and evaluate its accuracy. METHODS: 3D-printed mandibular dental models were divided into point cloud group (PCG) and fiducial point group (FPG) based on registration method. Fiducial points and target points were prepared in FPG, while only target points were prepared in PCG. After cone-beam computed tomography imaging and intraoral scanning, registration was performed using respective methods, with PCG acquiring point clouds from different tooth surfaces. Registration accuracy was evaluated by calculating fiducial registration error and target registration error. Then the robot system performed root canal localization in each group, measuring entry, apical and angular deviations. Statistics were analyzed using independent sample t-tests and one-way ANOVA. RESULTS: PCG achieved lowest registration errors when lingual surface point clouds were acquired for anterior teeth and occlusal surface point clouds for posterior teeth (P < .05). Compared with FPG, the fiducial registration error of PCG was significantly lower (P < .05), while the target registration error was comparable (P > .05). In PCG, the robotic system demonstrated entry, apical, and angular deviations of 0.25 ± 0.08 mm, 0.29 ± 0.06 mm, and 1.34 ± 0.81°, which was comparable to FPG (P > .05). CONCLUSIONS: The registration strategy utilizing point clouds from lingual surfaces of anterior teeth and occlusal surfaces of posterior teeth achieves high accuracy, feasible for robotic root canal localization. This method may enhance registration accuracy and clinical efficiency.

来源:J Endod,查看原文。版权归原作者所有。

引用

  1. Piao Y, Deng Y, Bao X, et al. Accuracy of Robotic Root Canal Localization Using Optimized Point Cloud Registration Strategies: An In Vitro Study. J Endod. 2025. PMID: 41161406. doi:10.1016/j.joen.2025.10.013

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。