文献速递牙体牙髓病

三种单锉系统在扁平根管中的牙本质完整性与成形能力比较

Dentine Integrity and Shaping Ability of 3 Single-File Systems in Flat-Shaped Canals.
PubMed 文献 · Int Endod J · 2025-10-16

牙本质厚度随时间显著减少,但临界薄区仅局限于根中段近远中向。

要点

  • 三种单锉系统成形性能相当,组间无显著差异。
  • 牙本质厚度随时间显著减少,但临界薄区局限。
  • 硬组织碎屑量组间无显著差异。

核心结论

  • SAF Infinitum、Reciproc Blue和XP-endo Rise Shaper在扁平根管中提供相当的成形性能和牙本质保存。
  • 所有系统均导致牙本质变薄,但临界薄区有限且局限。

主要发现

  • 所有组预备后根管体积和表面积显著增加,未预备区域显著减少(p < 0.05)。
  • 成形参数在各时间点组间无显著差异(p > 0.05)。
  • 所有组牙本质厚度随时间显著减少(p < 0.001),但Reciproc Blue在颊侧颈周区和舌侧根中区例外(p > 0.05)。
  • 舌侧颈周区(SAF Infinitum)和近远中根中水平(Reciproc Blue和XP-endo Rise Shaper)牙本质减少更显著(p < 0.05)。
  • 预备后仅根中水平近远中向观察到临界薄牙本质区(< 0.5 mm)。

临床怎么用

  • 三种单锉系统均可用于扁平根管成形,需注意根中水平近远中向牙本质厚度。

局限性

  • 离体牙研究,样本量有限(每组12颗),结果需临床验证。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

AIM: This study aimed to compare the shaping ability of 3 single-file systems in flat-shaped canals. METHODOLOGY: Thirty-six extracted mandibular incisors with flat-shaped canals were anatomically matched using micro-CT technology and assigned to three groups (n = 12) based on the single-file system used for root canal preparation: 1.5-mm SAF Infinitum, Reciproc Blue R25, or XP-endo Rise Shaper. After a new micro-CT scan, pre- and post-preparation datasets were co-registered and analysed to quantify changes in canal volume, surface area, unprepared canal areas, dentine thickness and hard-tissue debris volume. Parametric (One-way ANOVA, Student's t-test for repeated measures) and non-parametric (Kruskal-Wallis and Wilcoxon Signed Rank) tests were applied for statistical comparisons (α = 5%). RESULTS: All groups showed significant increases in canal volume and surface area and reductions in unprepared canal areas after each preparation step (p < 0.05), with no significant differences among SAF Infinitum, Reciproc Blue and XP-endo Rise Shaper in shaping parameters at any time point (p > 0.05). Dentine thickness significantly decreased over time in all groups (p < 0.001), except for Reciproc at the buccal pericervical region and lingual midroot (p > 0.05), with greater reductions in the lingual pericervical region (SAF Infinitum) and mesiodistal mid-root level (Reciproc Blue and XP-endo Rise Shaper) (p < 0.05). Critically thin dentine areas (< 0.5 mm) were only observed mesiodistally at the mid-root level after preparation. Hard-tissue debris volumes did not differ significantly among groups (p > 0.05). CONCLUSIONS: SAF Infinitum, Reciproc Blue and XP-endo Rise Shaper systems provide comparable shaping performance and dentine preservation in flat-shaped canals. While all systems cause some dentine thinning, critically thin areas remained limited and localised.

来源:Int Endod J,查看原文。版权归原作者所有。

引用

  1. Belladonna FG, Solomonov M, De-Deus G, et al. Dentine Integrity and Shaping Ability of 3 Single-File Systems in Flat-Shaped Canals. Int Endod J. 2025. PMID: 41102910. doi:10.1111/iej.70052

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。