文献速递牙体牙髓病

12种镍钛往复单锉系统的设计、力学、冶金、流体动力学与有限元综合分析

Characterising 12 NiTi Reciprocating Systems: An Integrative Laboratorial Analysis of Design, Mechanics, Metallurgy, Fluid Dynamics and Finite Element Analysis.
PubMed 文献 · Int Endod J · 2025-08-05

该研究整合几何、力学、冶金、计算流体动力学与有限元分析,比较8个品牌12种镍钛往复单锉系统。结果显示各系统在螺旋密度、横截面、相变温度及力学性能上差异显著;大核心与奥氏体相主导者抗屈曲更强,马氏体相或混合横截面者更柔顺;保守成形增加壁剪切应力但减少根尖冲洗液交换;各组牙根应力模式相似。

要点

  • 大核心与奥氏体相主导的镍钛往复锉抗屈曲能力更强。
  • 马氏体相或混合横截面设计的锉更柔顺。
  • 保守成形提高壁剪切应力但限制根尖冲洗液交换。

核心结论

  • 当前镍钛往复系统在设计、力学、流体动力学与冶金方面存在显著差异。
  • 大核心与奥氏体相结构提供更优抗屈曲性能。
  • 保守成形改善剪切应力但限制根尖清洁。
  • 各系统预备后牙根应力保持一致。

研究设计与样本

  • 共纳入276根镍钛往复器械,代表8个品牌12种类型。
  • 采用立体显微镜、扫描电镜、3D光学扫描、能谱仪与差示扫描量热法评估设计与冶金性能。
  • 通过抗屈曲测试与显微硬度测试评估力学性能。
  • 基于微CT前磨牙模型虚拟预备根管,并进行计算流体动力学与有限元分析。
  • 数据分析采用Shapiro-Wilk检验与Kruskal-Wallis检验(p < 0.05)。

主要发现

  • 各系统在螺旋密度、横截面设计、尺寸、体积及相变温度上差异显著。
  • 大根尖核心(One Files与Reciproc M-Wire)及奥氏体相主导(Perfect RC Silver与One Files)者抗屈曲强度更高。
  • 含马氏体相(Perfect RC Gold、WaveOne Gold与One Files Blue)或混合横截面(One RECI与Flash)的锉更柔顺。
  • 保守成形(Easy-File Flex、EdgeOne Fire、One RECI、WaveOne Gold)增加壁剪切应力但减少根尖冲洗液交换。
  • 有限元分析显示各组应力模式相似,修复后牙根应力较低。

临床怎么用

  • 选择器械时需权衡抗屈曲性能与柔顺性,大核心奥氏体相适于需要刚性场景。
  • 保守成形设计可提高壁剪切应力,但临床需注意根尖冲洗液交换减少。
  • 各系统牙根应力模式相似,修复后牙根应力较低。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

AIM: To comprehensively compare 12 nickel-titanium (NiTi) reciprocating single-file systems from eight manufacturers by integrating geometric, mechanical, metallurgical and in silico analyses. METHODOLOGY: A total of 276 NiTi reciprocating instruments, representing 12 types across 8 brands, were selected, including Easy-File Flex Regular 25, EdgeOne Fire Primary, Flash 25.06vt, One Files R25 and Blue R25, One RECI N25, Perfect RC R25 (Blue, Gold and Silver), Reciproc R25 (Blue and M-Wire) and WaveOne Gold Primary. They were evaluated using stereomicroscopy, scanning electron microscopy, 3D optical scanning, energy-dispersive X-ray spectroscopy and differential scanning calorimetry to assess design and metallurgical properties. Mechanical performance was tested via buckling resistance and microhardness. A micro-CT-based premolar model was virtually prepared for each instrument to simulate canal shaping. Computational fluid dynamics (CFD) assessed irrigant penetration, wall shear stress and apical pressure. Finite element analysis (FEA) evaluated stress distribution in prepared roots. Data were analysed using the Shapiro-Wilk test for normality and the Kruskal-Wallis test for group comparisons (p < 0.05). RESULTS: The systems differed considerably in spiral density, cross-sectional design, size, volume and phase transformation temperatures. Instruments with larger apical cores (One Files and Reciproc M-Wire) and austenitic-phase dominance (Perfect RC Silver and One Files) showed greater buckling strength. Files with martensitic phases (Perfect RC Gold, WaveOne Gold and One Files Blue) or hybrid cross-sections (One RECI and Flash) were more flexible. CFD revealed that conservative shaping (Easy-File Flex, EdgeOne Fire, One RECI, WaveOne Gold) increased wall shear stress but reduced apical irrigant exchange. FEA showed similar stress patterns across all groups, with lower stress in restored roots. CONCLUSIONS: Substantial variation exists among current NiTi reciprocating systems in terms of design, mechanics, fluid dynamics and metallurgy. Instruments with large cores and austenitic-phase structure provide superior buckling resistance. Conservative shaping improves shear stress but limits apical cleaning. Root stress remained consistent across systems. These findings highlight the importance of optimising instrument design and clinical protocols to balance shaping efficacy and irrigant delivery.

来源:Int Endod J,查看原文。版权归原作者所有。

引用

  1. Martins JNR, Silva EJNL, Rito Pereira M, et al. Characterising 12 NiTi Reciprocating Systems: An Integrative Laboratorial Analysis of Design, Mechanics, Metallurgy, Fluid Dynamics and Finite Element Analysis. Int Endod J. 2025. PMID: 40765118. doi:10.1111/iej.70010

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。