无牙颌软组织运动边界光学数字整塑技术的研发与初步临床评价
本研究基于肌静力线理论建立光学数字整塑技术,用口内扫描仪高频摄像动态捕捉软组织功能整塑数据并结合动度梯度识别算法。纳入10例戴用合适全口义齿的无牙颌患者,比较0.3至0.7毫米动度阈值下肌静力线与义齿边缘线的曲线间法向偏差。结果显示0.5毫米阈值偏差最小,据此推荐0.5毫米作为动度阈值。
要点
- 基于肌静力线理论建立光学数字整塑技术,实现肌动力区与肌静力区的动度阈值分割。
- 10例无牙颌患者中,0.3至0.7毫米阈值范围内0.5毫米阈值下肌静力线与义齿边缘曲线间法向偏差最小。
- 基于该阈值设计的全口义齿在动态功能测试中未发生脱位,边缘封闭满足临床要求。
核心结论
- 无牙颌软组织运动边界的光学数字整塑技术可将肌静力线理论转化为数字化可量化参数。
- 根据10例病例的总结,推荐选择0.5毫米作为动度阈值。
研究设计与样本
- 方法建立研究:基于肌静力线理论,结合口内三维扫描仪(IOS)高频摄像动态捕捉软组织功能性整塑数据与自主研发的动度梯度识别算法。
- 纳入2024年1至12月于北京大学口腔医学院·口腔医院修复科就诊并戴用合适全口义齿的无牙颌患者10例。
- 对比分析动度阈值为0.3、0.4、0.5、0.6、0.7毫米的肌静力线与义齿边缘线的曲线间法向偏差以优选动度阈值,并进行单一案例临床验证。
主要发现
- 0.3至0.7毫米动度阈值范围内,0.5毫米动度阈值下生成的肌静力线与义齿边缘的曲线间法向偏差最小。
- 临床验证案例显示,基于该阈值设计的全口义齿在动态功能测试中未发生脱位,边缘封闭满足临床要求。
关键数值与推荐
- 0.3至0.7毫米动度阈值范围内,0.5毫米动度阈值下肌静力线与义齿边缘的曲线间法向偏差最小。
- 基于0.5毫米阈值设计的全口义齿在动态功能测试中未发生脱位,边缘封闭满足临床要求。
- 根据10例病例的总结推荐选择0.5毫米作为动度阈值。
临床怎么用
- 作者根据10例病例的总结推荐选择0.5毫米作为动度阈值。
- 基于0.5毫米阈值设计的全口义齿在动态功能测试中未发生脱位,边缘封闭满足临床要求。
局限性
- 结论基于10例病例的数据总结。
- 仅进行了单一案例临床验证。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
Objective: To address the critical issue of missing dynamic border molding information in edentulous direct digital impression technology, this study explores innovative digital solutions and conducts preliminary application validation. Methods: Based on the myostatic line theory, a methodology was established: intraoral scanner (IOS) high-frequency video was utilized to dynamically capture functional molding data of soft tissues, integrated with a self-developed mobility gradient recognition algorithm to achieve dynamic threshold segmentation between the muscle dynamic zone and myostatic zone, termed "optical digital molding technology". Ten edentulous patients with well-fitting complete dentures, treated at the Department of Prosthodontics, Peking University School and Hospital of Stomatology from January 2024 to December 2024, were enrolled. The standard deviation between the muscle static line (generated by mobility gradient algorithm with thresholds of 0.3-0.7 mm) and the denture border curve was analyzed to optimize the dynamic threshold, followed by single-case clinical validation. Results: Among the mobility thresholds of 0.3-0.7 mm, the 0.5 mm threshold yielded the smallest standard deviation between the myostatic line and denture border. Clinical validation demonstrated that dentures designed with this threshold exhibited no displacement during dynamic functional tests, with marginal sealing meeting clinical standards. Conclusions: The optical digital border molding technique for edentulous soft tissue boundaries translates the myostatic line theory into quantifiable parameters for the first time. Based on data from 10 cases, a mobility threshold of 0.5 mm is recommended for clinical application. 目的: 构建全口义齿数字化功能性整塑的技术路径,以期解决无牙颌直接数字化印模技术中边缘整塑信息缺失的关键问题。 方法: 基于肌静力线理论进行方法建立:结合口内三维扫描仪(IOS)高频摄像动态捕捉软组织功能性整塑数据,结合自主研发的动度梯度识别算法,以实现肌动力区与肌静力区的动度阈值分割,并命名为光学数字整塑技术。纳入2024年1—12月于北京大学口腔医学院·口腔医院修复科就诊并戴用合适全口义齿的无牙颌患者10例,对比分析由动度梯度识别算法生成动度阈值为0.3、0.4、0.5、0.6、0.7 mm的肌静力线与义齿边缘线的曲线间法向偏差,优选动度阈值,并进行单一案例临床验证。 结果: 0.3~0.7 mm动度阈值范围内,0.5 mm动度阈值下生成的肌静力线与义齿边缘的曲线间法向偏差最小。临床验证案例显示,基于该阈值设计的全口义齿在动态功能测试中未发生脱位,边缘封闭满足临床要求。 结论: 无牙颌软组织运动边界的光学数字整塑技术可将肌静力线理论转化为数字化可量化参数,并根据10例病例的总结推荐选择0.5 mm作为动度阈值。.
引用
- Xu XK, Deng KH, Tian SK, et al. [Development and preliminary clinical evaluation of an optical digital border molding technique for soft tissue movement boundary in edentulous jaws]. Zhonghua Kou Qiang Yi Xue Za Zhi. 2025. PMID: 40443315. doi:10.3760/cma.j.cn112144-20250407-00124
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。