类金刚石碳涂层增强镍钛旋转器械的机械性能:多方法分析
研究比较了含类金刚石碳(DLC)涂层与无涂层的镍钛旋转器械各55根,评估设计、冶金和机械性能。DLC涂层组循环疲劳抗力显著更优(p=0.0028)、弯曲载荷更低(p=0.0294)、切割效率更低(p<0.0001)、显微硬度更高(p=0.0019),屈曲强度无差异(p=0.3569)。结论认为DLC表面处理显著增强了循环疲劳抗力、柔韧性和显微硬度且不损害结构完整性。
要点
- DLC涂层镍钛器械循环疲劳抗力显著优于无涂层器械(p=0.0028)。
- DLC涂层组弯曲载荷更低(p=0.0294),柔韧性更优。
- DLC涂层组显微硬度更高(p=0.0019),切割效率更低(p<0.0001)。
核心结论
- 类金刚石碳表面处理显著增强镍钛旋转器械的循环疲劳抗力、柔韧性和显微硬度,且不损害其结构完整性。
研究设计与样本
- 选取110根尺寸25/.06、长度25 mm的镍钛器械,含DLC涂层组(n=55)和无涂层组(n=55)进行比较。
- 比较内容包括设计(体视显微镜、扫描电子显微镜)、冶金(能量色散X射线光谱、差示扫描量热法)和机械性能(断裂时间、弯曲强度、屈曲强度、切割效率、显微硬度)。
- 数据采用Mann-Whitney检验和独立样本Student t检验分析(α=5%)。
主要发现
- 设计分析确认两组器械几何特征相同、螺旋和尖端设计相似,DLC涂层器械表面不规则更少且呈多色外观。
- 冶金分析显示两组相变温度相同,R相开始于约32°C、冷却时结束于约25°C,奥氏体完成温度约35°C。
- DLC涂层组循环疲劳抗力显著更优(p=0.0028)。
- DLC涂层组弯曲载荷更低(p=0.0294)、切割效率更低(p<0.0001)、显微硬度更高(p=0.0019)。
- 两组屈曲强度无差异(p=0.3569)。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
AIM: This study aimed to evaluate the impact of diamond-like carbon (DLC) surface treatment on the mechanical properties of nickel-titanium (NiTi) rotary instruments. METHODOLOGY: One hundred and ten nickel-titanium instruments with a size of 25/.06 and a length of 25 mm, both with (n = 55) and without (n = 55) a DLC coating were selected and compared regarding their design (stereomicroscopy, scanning electron microscopy), metallurgy (energy-dispersive X-ray spectroscopy, differential scanning calorimetry), and mechanical performance (time to fracture, bending strength, buckling strength, cutting efficiency, and microhardness). Data were analysed using Mann-Whitney and independent Student's t-test (α = 5%). RESULTS: The design analysis confirmed that both instruments had identical geometric features, similar spiral and tip designs, with DLC-coated instruments showing fewer surface irregularities and a multi-coloured appearance. Metallurgical analysis revealed identical transformation temperatures for both groups, with the R-phase starting at ~32°C, finishing at ~25°C during cooling, and the austenitic finish occurring at ~35°C. DLC-coated instruments demonstrated significantly superior cyclic fatigue resistance (p = 0.0028), lower bending load (p = 0.0294), lower cutting efficiency (p < 0.0001), and higher microhardness (p = 0.0019), whilst no difference was observed in terms of buckling strength (p = 0.3569). CONCLUSIONS: Diamond-like carbon surface treatment significantly enhanced cyclic fatigue resistance, flexibility, and microhardness of NiTi rotary instruments without compromising their structural integrity.
引用
- Silva EJNL, Lorenzoni TVM, Pereira MDR, et al. Diamond-like carbon coating enhances mechanical performance of NiTi rotary instruments: A multimethod analysis. Int Endod J. 2025. PMID: 40366170. doi:10.1111/iej.14253
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。