白色念珠菌在CAD-CAM义齿树脂表面的定植
本研究比较了研磨、3D打印和传统热固化PMMA树脂表面白色念珠菌生物膜形成,发现研磨组生物膜形成量显著高于对照组,3D打印组居中且可见真菌丝,提示不同制作方式影响微生物定植。
要点
- 研磨组白色念珠菌生物膜形成量显著高于热固化对照组(p=0.0051)。
- 3D打印组生物膜量介于对照组与研磨组之间,且持续观察到真菌丝。
- 不同义齿树脂制作方式影响白色念珠菌定植,选材时需考虑患者真菌感染风险。
核心结论
- 不同树脂类型间白色念珠菌生物膜形成存在显著差异,3D打印表面显示更多菌丝生长和潜在更高毒力。
研究设计与样本
- 体外研究,三组义齿树脂样本(n=27):研磨组(Ivotion, Ivoclar Vivadent)、3D打印组(Saremco Print Denturetec)和热固化PMMA对照组。
主要发现
- 对照组生物膜附着中位数最低(1.2×10⁶ CFU/生物膜,IQR:3.4×10⁵-5.6×10⁶),变异性高。
- 研磨组生物膜形成显著更高(6.4×10⁶ CFU/生物膜,IQR:5.9×10⁶-7.6×10⁶,p=0.0051),变异性最小。
- 3D打印组生物膜附着(4.8×10⁶ CFU/生物膜,IQR:3.6×10⁶-6.2×10⁶)介于对照组和研磨组之间。
- SEM显示对照组和研磨组有稀疏微菌落及密集多层酵母和假菌丝生物膜;3D打印组生物膜中等密度,以酵母和假菌丝为主,但持续观察到真菌丝。
临床怎么用
- 作者认为,牙医和修复医生在为真菌感染高风险患者(如免疫受损个体或老年义齿佩戴者)选择材料时应考虑这些发现。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVE: This study assessed the biofilm formation of C. albicans on milled and 3D-printed denture resin surfaces and compared it to a control group of conventional heat-polymerized polymethylmethacrylate (PMMA) resin group. METHODS: Three groups of denture resin samples (n = 27) were fabricated: milled (Ivotion, Ivoclar Vivadent), 3D-printed (Saremco Print Denturetec), and heat-polymerized PMMA controls. Samples (8 mm × 3 mm) were CAD-designed, manufactured, quality-checked, and sterilized. C. albicans (GEGE1122.01) biofilms were grown on resin discs, incubated at 37 °C for 16 h, detached, and quantified. SEM analysis assessed biofilm morphology. Statistical analysis was conducted using non-parametric tests (p < 0.05). RESULTS: The lowest median biofilm attachment (1.2 × 10⁶ CFU/biofilm, IQR: 3.4 × 10⁵ - 5.6 × 10⁶) with high variability was observed in the control group. The milled group displayed significantly higher biofilm formation (6.4 × 10⁶ CFU/biofilm, IQR: 5.9 × 10⁶ - 7.6 × 10⁶, p = 0.0051) with least variation. The biofilm attachment on 3D-printed discs (4.8 × 10⁶ CFU/biofilm, IQR: 3.6 × 10⁶ - 6.2 × 10⁶) was intermediate between the control and milled groups. SEM findings revealed sparse microcolonies with dense, multi-layered biofilms of yeast and pseudohyphal forms in the control and milled groups. 3D-printed group had moderately dense biofilms, where yeast and pseudohyphae were dominant, but true hyphae were also consistently observed. CONCLUSION: This study reveals significant differences in the C. albicans biofilm formation across the resin types, with 3D-printed surfaces showing increased hyphal growth and potential for higher virulence. CLINICAL SIGNIFICANCE: Understanding the impact of fabrication methods on microbial colonization is essential for improving denture hygiene and patient outcomes. Dentists and prosthodontists should consider these findings when selecting materials for patients at high risk of fungal infections, such as immunocompromised individuals or elderly denture wearers.
引用
- Vetsch G, Manoil D, Wulfman C, et al. Candida albicans colonization on CAD-CAM denture resin surface. J Dent. 2025. PMID: 40222702. doi:10.1016/j.jdent.2025.105756
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。