文献速递牙体牙髓病儿童口腔

一种可重复使用的3D打印训练模型用于未成熟牙牙外伤的牙髓管理

A re-usable 3D-printed training model for the endodontic management of dental trauma in immature teeth.
PubMed 文献 · Int Endod J · 2025-04-10

目的为开发一种3D打印模型,用于模拟未成熟牙外伤相关的牙髓和修复治疗,如牙髓血运重建或根尖屏障放置。方法通过CT数据分割与计算机辅助设计优化,重点反映开放根尖孔和薄根壁等未成熟牙特征,并设计含红色加压液体的管路模拟根尖乳头出血。结果该模型可用于牙髓血运重建、部分牙髓切断后断片再附着及夹板应用、以及使用水硬性硅酸钙水门汀放置根尖屏障的逐步训练。

要点

  • 3D打印模型可模拟未成熟牙外伤后的牙髓血运重建、部分牙髓切断及根尖屏障放置等操作。
  • 模型设计包含红色加压液体管路,可在操作中穿孔以模拟根尖乳头出血。
  • 模型采用低成本简单部件与3D打印组件组合,具备可及性、可交换性和可重复使用性。

核心结论

  • 该模型成功实现了其预期目标,未来可用于本科和研究生教育中未成熟牙外伤相关牙髓管理的各种牙外伤治疗模拟。

研究设计与样本

  • 通过CT数据分割、组合、调整并利用计算机辅助设计功能优化,开发用于外伤相关模拟的3D打印训练模型。
  • 设计基于低成本简单部件与3D打印组件的组合,以实现最大可及性、可交换性和可重复使用性。

主要发现

  • 模型 qualifies 用于未成熟牙外伤后并发症的牙髓管理训练。
  • 可逐步执行与临床操作一致的牙髓血运重建、部分牙髓切断后断片再附着及夹板应用、以及使用水硬性硅酸钙水门汀放置根尖屏障。

临床怎么用

  • 作者认为该模型未来可用于本科和研究生教育中未成熟牙外伤相关牙髓管理的各种牙外伤治疗模拟。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

AIM: To develop a 3D-printed model enabling treatment simulation of trauma-related endodontic and restorative procedures like revitalization or placement of an apical plug on teeth with incomplete root formation. METHODOLOGY: To generate a realistic training model suitable for trauma-related simulations, CT-Data sets were segmented, combined, adjusted and optimized using computer-aided design features. Specific focus was on optimally reflecting characteristics of immature teeth like open apical foramina and thin root walls. For reflection of the revitalization process, a set-up including a tube filled with red liquid under pressure was developed to be perforated during the procedure by the trainee, simulating bleeding from the apical papilla into the root canal system. Design was based on a combination of cost-effective simple parts combined with 3D-printed components to achieve maximal accessibility, exchangeability and re-usability. Model assembly and preparation were described in step-by-step instructions. RESULTS: As a result of the developmental process, the presented model qualifies for the training of the endodontic management of complications on immature teeth after dental trauma. Step-by-step descriptions aligned with the clinical procedures are performable for a revitalization procedure, for pulpotomy followed by fragment re-attachment and splint application and for placement of an apical plug using hydraulic calcium silicate cements. CONCLUSIONS: The model successfully achieved its intended objectives, so that it may be used in the future in various dental trauma treatment simulations for undergraduate and postgraduate education on the endodontic management of trauma-related therapies in immature teeth. Its common manufacturing process, affordability and re-usability support accessibility and sustainability.

来源:Int Endod J,查看原文。版权归原作者所有。

引用

  1. Maier E, Zentgraf J, Angele E, et al. A re-usable 3D-printed training model for the endodontic management of dental trauma in immature teeth. Int Endod J. 2025. PMID: 40205914. doi:10.1111/iej.14235

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。