文献速递口腔修复与种植口腔颌面外科

CBCT来源骨微结构对机器人辅助种植手术精度的影响:一项回顾性研究

Effect of Bone Microstructure Derived From CBCT on the Accuracy of Robot-Assisted Implant Surgery: A Retrospective Study.
PubMed 文献 · Clin Oral Implants Res · 2025-02-06

本研究回顾性分析2023年1月至10月接受机器人辅助种植手术的52例患者,用CBCT评估骨微结构参数(BV、TV、BV/TV、BS、BS/BV、Tb.Th、Tb.Sp),分析其与种植体平台偏差、根尖偏差及角度偏差的关系。结果显示BS/BV是多种种植体偏差的潜在促进因素,BV/TV和Tb.Th分别是根尖全局偏差和角度偏差的潜在抑制因素;Tb.Th预测大根尖全局偏差的ROC曲线下面积最大为0.711(p<0.001),最佳截断值>0.179,敏感度和特异度分别为70.37%和76.92%。结论认为骨微结构可能影响机器人手术中种植体植入的精度。

要点

  • BS/BV是机器人辅助种植手术中多种种植体偏差的潜在促进因素。
  • BV/TV和Tb.Th分别是根尖全局偏差和角度偏差的潜在抑制因素。
  • Tb.Th预测大根尖全局偏差的ROC曲线下面积为0.711(p<0.001),最佳截断值>0.179。

核心结论

  • 骨微结构可能影响机器人手术中牙种植体植入的精度。
  • 将骨质量评估纳入术前规划可能提高种植手术的精确度和效果,凸显进一步改进机器人辅助牙科手术技术的潜力。

研究设计与样本

  • 回顾性研究,分析2023年1月至2023年10月期间接受机器人辅助种植手术的52例患者。
  • 使用锥形束计算机断层扫描(CBCT)评估骨微结构参数,包括骨体积(BV)、组织体积(TV)、骨体积分数(BV/TV)、骨表面积(BS)、骨表面积分数(BS/BV)、骨小梁厚度(Tb.Th)和骨小梁分离度(Tb.Sp)。
  • 采用术前和术后CBCT数据评估种植体精度,统计分析骨微结构参数与种植体偏差(平台偏差、根尖偏差和角度偏差)的关系。

主要发现

  • 在机器人辅助种植手术中,BS/BV是多种种植体偏差的潜在促进因素。
  • BV/TV和Tb.Th分别是根尖全局偏差和角度偏差的潜在抑制因素。
  • 按中位数将种植体偏差分为大偏差和小偏差两组,ROC曲线分析显示Tb.Th预测大根尖全局偏差的曲线下面积最大,为0.711(p<0.001),最佳截断值>0.179,敏感度和特异度分别为70.37%和76.92%。

临床怎么用

  • 作者认为,将骨质量评估纳入术前规划可能提高种植手术的精确度和效果,并凸显进一步改进机器人辅助牙科手术技术的潜力。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVE: The aim of this study was to investigate the influence of bone microstructure on the accuracy of robot-assisted dental implant surgery. MATERIALS AND METHODS: This retrospective study analyzed 52 patients who received robot-assisted implant surgery between January 2023 and October 2023. Cone beam computed tomography (CBCT) scans were used to evaluate bone microstructural parameters, including the bone volume (BV), tissue volume (TV), bone volume fraction (BV/TV), bone surface (BS), bone surface fraction (BS/BV), trabecular thickness (Tb.Th), and trabecular separation (Tb.Sp). Preoperative and postoperative CBCT data were used to evaluate implant accuracy, and the relationship between bone microstructure parameters and implant deviation including platform deviation, apex deviation, and angular deviation was statistically analyzed. RESULTS: In robot-assisted implant surgery, BS/BV was a potential facilitator of several implant deviations, while BV/TV and Tb.Th were potential inhibitors of apex global deviation and angular deviation, respectively. Implant deviations were divided into two groups of large and small deviations by median, and the receiver operating characteristic (ROC) curve analysis showed that Tb.Th had the largest area under the ROC for predicting large apex global deviation, 0.711 (p < 0.001), with an optimal cutoff value > 0.179, a sensitivity and specificity of 70.37% and 76.92%. CONCLUSION: The study concluded that bone microstructure might affect the accuracy of dental implant placement in robotic surgeries. Incorporating bone quality assessments into preoperative planning may enhance the precision and outcomes of implant procedures, highlighting the potential for further refinement in robotic-assisted dental surgery techniques. TRIAL REGISTRATION: ClinicalTrials.gov identifier: ChiCTR2400085813.

来源:Clin Oral Implants Res,查看原文。版权归原作者所有。

引用

  1. Dong W, Wang L, Zheng Y, et al. Effect of Bone Microstructure Derived From CBCT on the Accuracy of Robot-Assisted Implant Surgery: A Retrospective Study. Clin Oral Implants Res. 2025. PMID: 39912590. doi:10.1111/clr.14414

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。