数字化与常规可摘全口义齿在无牙颌患者中的临床效果与成本效益:一项回顾性研究
该回顾性研究在锡耶纳大学比较了30例常规全口义齿与30例数字化全口义齿(15例切削、15例3D打印)的临床效果与成本效益。数字化组椅旁时间与实验室成本显著低于常规组,咬合力与咀嚼效能无显著差异,OHIP-14评分提示数字化组患者满意度略低但无临床意义。
要点
- 数字化全口义齿椅旁时间154.31±13.19分钟,显著低于常规义齿的218.00±20.75分钟(p<0.0001)。
- 数字化全口义齿实验室成本€378.79±137.46,显著低于常规义齿的€459.15±63.72(p=0.0059)。
- 两组咬合力与咀嚼效能无统计学显著差异,OHIP-14提示数字化组满意度略低但无临床意义。
核心结论
- 数字化可摘全口义齿(包括切削与3D打印模型)为常规义齿提供了实用且高效的替代方案,尤其在减少椅旁时间和实验室成本方面。
研究设计与样本
- 回顾性临床研究,在锡耶纳大学可摘修复科开展,共60例患者分为两组:30例接受常规全口义齿,30例接受数字化全口义齿(其中15例切削、15例3D打印)。
- 临床结局采用OHIP-14、咬合力测量和咀嚼效能测试在治疗前及治疗后六个月进行评估,并记录椅旁时间、随访时间和实验室成本进行比较。
主要发现
- 数字化全口义齿椅旁时间平均154.31±13.19分钟,常规全口义齿平均218.00±20.75分钟(p<0.0001)。
- 数字化全口义齿实验室成本€378.79±137.46,常规全口义齿€459.15±63.72(p=0.0059)。
- 两组间咬合力或咀嚼效能未观察到统计学显著差异。
- OHIP-14评分提示数字化全口义齿患者满意度略低,但差异无临床意义。
临床怎么用
- 原文结论指出数字化可摘全口义齿(包括切削与3D打印模型)为常规义齿提供了实用且高效的替代方案,尤其在减少椅旁时间和实验室成本方面。
- 原文临床意义部分指出这些简化的数字化流程可应用于居住机构或国家医疗保健项目中,以改善更多患者获得修复治疗的机会。
局限性
- 原文未报告局限性
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVES: This study aimed to compare the clinical effectiveness and cost-efficiency of conventional and digital prosthodontic protocols, with a specific focus on milled and 3D-printed digital removable complete dentures. METHODS: This retrospective clinical study was conducted at the Removable Prosthodontics Department of the University of Siena. 60 patients were divided into two groups: 30 received conventional complete dentures, while the remaining 30 received digital complete dentures (15 milled and 15 3D-printed). Clinical outcomes were assessed using OHIP-14, bite force measurements, and masticatory performance tests before and six months after treatment. Treatment-related metrics, including chairside time, follow-up time, and laboratory costs, were recorded and compared across the groups. Statistical analysis was performed to determine the significance of differences between conventional and digital complete dentures, as well as between milled and 3D-printed digital complete dentures. RESULTS: The study revealed that digital complete dentures significantly reduced chairside time compared to conventional dentures, with average times of 154.31 ± 13.19 min for digital dentures and 218.00 ± 20.75 min for conventional dentures (p < 0.0001). Laboratory costs were found to be statistically lower for digital dentures, (€378.79 ± 137.46 vs. €459.15 ± 63.72, p = 0.0059) compared to conventional dentures. No statistically significant differences were observed in bite force or masticatory performance between the groups. OHIP-14 scores indicated slightly lower patient satisfaction with digital dentures, but the difference was not clinically significant. CONCLUSION: Digital removable dentures, including both milled and 3D-printed models, offer a practical and efficient alternative to conventional dentures, particularly in terms of reducing chairside time and laboratory costs. CLINICAL SIGNIFICANCE: Digital removable dentures offer a practical and efficient alternative to conventional dentures, particularly in terms of reducing chairside time and costs. These simplified digital protocols could be applied in residential facilities or within national healthcare programs, improving access to prosthetic care for a larger number of patients.
引用
- Casucci A, Ferrari Cagidiaco E, Verniani G, et al. Digital vs. conventional removable complete dentures: A retrospective study on clinical effectiveness and cost-efficiency in edentulous patients: Clinical effectiveness and cost-efficiency analysis of digital dentures. J Dent. 2024. PMID: 39645185. doi:10.1016/j.jdent.2024.105505
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。