口腔颌面外科个体化颌骨腔洞铣削机器人系统的开发与验证
本研究开发并验证了一套用于口腔颌面外科精准微创颌骨铣削的机器人系统,硬件包括UR5E机械臂和双目定位系统,软件可基于三维模型生成刀具路径。在上颌完全埋伏多生牙模型上比较机器人组与静态导板组(每组n=8),机器人组在均方根误差、平移误差、过度去除率和最大距离上显著更小,重叠率和Dice系数显著更大,旋转误差(P=0.80)和去除不足率(P=0.92)无显著差异。结论为该系统精度初步满足临床要求。
要点
- 机器人系统可基于三维模型自动生成颌骨铣削刀具路径。
- 在埋伏多生牙模型中,机器人组多项精度指标优于静态导板组。
- 旋转误差和去除不足率两组无显著差异。
核心结论
- 开发的颌骨腔洞铣削机器人系统精度初步验证满足临床要求。
研究设计与样本
- 机器人系统硬件主要包括UR5E机械臂和FusionTrack 250双目定位系统,软件为Dental Navi 3.0.0。
- 使用软件和三维打印制作上颌完全埋伏多生牙模型,规划个体化腔洞后分机器人组和静态导板组(每组n=8)进行上颌骨铣削。
主要发现
- 机器人组的均方根误差、平移误差、过度去除率和最大距离显著小于静态导板组。
- 机器人组的重叠率和Dice系数显著大于静态导板组。
- 两组旋转误差(P=0.80)和去除不足率(P=0.92)无统计学显著差异。
临床怎么用
- 该系统可用于牙自体移植、颧骨纤维结构不良手术重塑、完全埋伏多生牙或阻生牙拔除及牙髓显微外科等精准微创颌骨铣削。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVES: This study aimed to develop and validate a robotic system capable of performing accurate and minimally invasive jawbone milling procedures in oral and maxillofacial surgery. METHODS: The robotic hardware system mainly includes a UR5E arm (Universal Robots, Denmark) and the binocular positioning system (FusionTrack 250, Atracsys LLC, Switzerland). The robotic software (Dental Navi 3.0.0, Yakebot Technology Ltd., China) is capable of generating cutting tool paths based on three-dimensional shape description files, typically in the stereolithography format, and selected cutting tool parameters, as well as designing surgical accessories. Fully impacted supernumerary tooth models in the maxilla were fabricated using software and three-dimensional printing. Following the planning of a customized cavity to fully expose the tooth, maxillary bone milling was performed on both the robot and static guide groups (n = 8). After milling, all models underwent scanning for assessment. RESULTS: In the experiment with fully buried supernumerary tooth models in the maxilla, the root mean square, translation error, over-removal rate, and maximum distance were significantly smaller in the robot group compared to the static guide group. Moreover, the overlap ratio and Dice coefficient were significantly greater in the robot group. No statistically significant differences were observed between the two groups in terms of the rotation error (P = 0.80) or under-removal rate (P = 0.92). CONCLUSIONS: This study has developed a robotic system for milling individualized jawbone cavities in oral and maxillofacial surgery, and its accuracy has been preliminarily verified to meet clinical requirements. CLINICAL SIGNIFICANCE: The robotic system can achieve precise, minimally invasive, individualized jawbone milling in a variety of oral and maxillofacial surgeries, including tooth autotransplantation, surgical reshaping for zygomatic fibrous dysplasia, removal of fully impacted supernumerary or impacted teeth, and endodontic microsurgery, among other relevant clinical applications.
引用
- Liu C, Li Y, Wang F, et al. Development and validation of a robotic system for milling individualized jawbone cavities in oral and maxillofacial surgery. J Dent. 2024. PMID: 39357619. doi:10.1016/j.jdent.2024.105380
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。