文献速递牙体牙髓病

热对硅酸钙基封闭剂理化性质影响的文献综述

A Literature Review of the Effect of Heat on the Physical-Chemical Properties of Calcium Silicate-Based Sealers.
PubMed 文献 · J Endod · 2024-05-08

该综述遵循PRISMA 2020指南,系统检索五个数据库(截至2024年4月),纳入10项体外研究,定性评估热对硅酸钙基封闭剂(CSS)理化性质的影响。结果显示热暴露可加速凝固时间、降低流动性并增加薄膜厚度;对溶解度、粘度、阻射性、尺寸变化、显微硬度、孔隙率和抗压强度等性质仍存疑虑,需进一步研究。

要点

  • 热暴露可加速CSS凝固时间、降低流动性并增加薄膜厚度。
  • MTA Fillapex和Endosequence BC sealer HiFlow在热下变化最小,可能适合热充填技术。
  • 溶解度、粘度、阻射性等多项性质受热影响尚不明确,需更多研究。

核心结论

  • 基于纳入的体外研究,热暴露可加速CSS凝固时间、降低流动性并增加薄膜厚度。
  • 对溶解度、粘度、阻射性、尺寸变化、显微硬度、孔隙率和抗压强度等性质的热影响仍存疑虑,需进一步研究。
  • MTA Fillapex和Endosequence BC sealer HiFlow在热下变化最小,可能成为热充填技术的候选材料。

研究设计与样本

  • 纳入评估CSS理化性质的体外研究,共检索到6421条初步结果,最终10项研究纳入定性评估。
  • 使用PRILE 2021指南评估纳入研究的偏倚风险。

主要发现

  • 热暴露可加速CSS的凝固时间、降低流动性并增加薄膜厚度。
  • 对溶解度、粘度、阻射性、尺寸变化、显微硬度、孔隙率和压缩强度等性质的热影响仍存在担忧。
  • MTA Fillapex和Endosequence BC sealer HiFlow在热下显示最小变化。

临床怎么用

  • 使用热垂直加压技术时,应考虑热对CSS凝固时间、流动性和薄膜厚度的影响。
  • MTA Fillapex和Endosequence BC sealer HiFlow在热下变化最小,可作为热充填技术的潜在选择。
  • 对溶解度、粘度、阻射性等性质受热影响尚不明确,临床选择CSS时应谨慎并关注后续研究。

局限性

  • 本综述仅基于体外研究进行定性综合,未进行定量荟萃分析。
  • 纳入研究数量有限(10项),且评估的理化性质种类较多,证据强度受限。
  • 对多种理化性质的热影响仍存疑虑,需进一步研究。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

INTRODUCTION: Recently, calcium silicate-based sealers (CSSs) have gained popularity in endodontic practice due to their biocompatibility and antimicrobial properties. They are considered viable alternatives to epoxy resin-based sealers. With the increased use of CSSs and warm vertical compaction techniques in root canal treatment, evaluating the impact of heat on CSSs properties is essential, therefore this review aimed to present a qualitative synthesis of available in vitro studies assessing the impact of heat on the physical-chemical properties of CSSs. METHODS: Following the Preferred Reporting Items for Systematic Reviews and Meta-Analysis 2020 guidelines, a systematic advanced electronic search was performed in Scopus, Embase, Medline (via PubMed), Web of Science, and Cochrane databases in November 2023 and updated in April 2024. In vitro studies that evaluated the physical-chemical properties of CSSs were eligible. PRILE 2021 guidelines were used for the assessment of the risk of bias-included studies. RESULTS: The search identified a total of 6421 preliminary results and 10 studies were included for qualitative assessment. Eleven different physiochemical properties were assessed by the included studies. Setting time and flow were the most evaluated property among the studies. A qualitative synthesis of the evidence on each property is presented. CONCLUSIONS: Based on the in vitro studies assessed in the present systematic review, results reveal that exposing CSSs to heat can accelerate their setting time, reduce their flow, and increase their film thickness. Concerns persist regarding solubility, viscosity, radiopacity, dimensional change, microhardness, porosity, and compressive strength, requiring further research. Certain CSSs, such as MTA Fillapex and Endosequence BC sealer HiFlow, show minimal changes under heat, making them potential candidates for warm filling techniques.

来源:J Endod,查看原文。版权归原作者所有。

引用

  1. Ashkar I, Sanz JL, Forner L, et al. A Literature Review of the Effect of Heat on the Physical-Chemical Properties of Calcium Silicate-Based Sealers. J Endod. 2024. PMID: 38729300. doi:10.1016/j.joen.2024.04.017

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。