文献速递牙体牙髓病

基于微流控与组织工程构建牙本质芯片

Construction of dentin-on-a-chip based on microfluidic technology and tissue engineering.
PubMed 文献 · J Dent · 2024-05-06

本研究利用三通道微流控芯片、根尖乳头干细胞(SCAP)和甲基丙烯酰化明胶(GelMA)构建简化牙本质芯片,发现2×10^4 cells/μL接种密度与5% GelMA最利于细胞增殖与均匀分布,且5% GelMA组SCAP成牙/成骨分化高于10% GelMA组。

要点

  • 推荐SCAP接种密度2×10^4 cells/μL用于牙本质芯片构建。
  • 5% GelMA比10% GelMA更促进SCAP成牙/成骨分化。
  • 该模型可作为再生牙髓的生物学测试平台。

核心结论

  • 在3D培养中GelMA浓度调控SCAP的成牙/成骨分化。
  • 推荐使用2×10^4 cells/μL的SCAP与5% GelMA构建简化牙本质芯片。

研究设计与样本

  • 设计三通道微流控装置,用SCAP和GelMA构建3D牙组织构造。
  • 研究不同细胞密度和GelMA浓度对芯片内层特征的影响。
  • 通过活/死染色和核/F-actin染色评估细胞活力和分布。
  • 通过ALP染色和茜素红染色评估成骨/成牙潜能。
  • 研究5%和10% GelMA浓度对SCAP成骨/成牙分化轨迹的影响。

主要发现

  • 3D组织构造在微流控芯片内3-7天保持高活力和良好铺展。
  • 细胞接种密度2×10^4 cells/μL最利于细胞增殖和均匀分布。
  • GelMA浓度5%和10%最有效促进细胞生长和均匀分布。
  • 5% GelMA组SCAP的成骨/成牙分化高于10% GelMA组。

关键数值与推荐

  • 推荐SCAP接种密度为2×10^4 cells/μL。
  • 推荐GelMA浓度为5%用于构建简化牙本质芯片。

临床怎么用

  • 该3D培养方案可用于诱导SCAP成牙分化并形成简化牙本质芯片。
  • 该芯片可作为再生牙髓的明确生物学模型。
  • 该模型可能作为细胞分化的潜在测试平台。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

AIM: Three-dimensional (3D) cell culture systems perform better in resembling tissue or organism structures compared with traditional 2D models. Organs-on-chips (OoCs) are becoming more efficient 3D models. This study aimed to create a novel simplified dentin-on-a-chip using microfluidic chip technology and tissue engineering for screening dental materials. METHODOLOGY: A microfluidic device with three channels was designed for creating 3D dental tissue constructs using stem cells from the apical papilla (SCAP) and gelatin methacrylate (GelMA). The study investigated the effect of varying cell densities and GelMA concentrations on the layer features formed within the microfluidic chip. Cell viability and distribution were evaluated through live/dead staining and nuclei/F-actin staining. The osteo/odontogenic potential was assessed through ALP staining and Alizarin red staining. The impact of GelMA concentrations (5 %, 10 %) on the osteo/odontogenic differentiation trajectory of SCAP was also studied. RESULTS: The 3D tissue constructs maintained high viability and favorable spreading within the microfluidic chip for 3-7 days. A cell seeding density of 2 × 104 cells/μL was found to be the most optimal choice, ensuring favorable cell proliferation and even distribution. GelMA concentrations of 5 % and 10 % proved to be most effective for promoting cell growth and uniform distribution. Within the 5 % GelMA group, SCAP demonstrated higher osteo/odontogenic differentiation than that in the 10 % GelMA group. CONCLUSION: In 3D culture, GelMA concentration was found to regulate the osteo/odontogenic differentiation of SCAP. The study recommends a seeding density of 2 × 104 cells/μL of SCAP within 5 % GelMA for constructing simplified dentin-on-a-chip. CLINICAL SIGNIFICANCE: This study built up the 3D culture protocol, and induced odontogenic differentiation of SCAP, thus forming the simplified dentin-on-a-chip and paving the way to be used as a well-defined biological model for regenerative endodontics. It may serve as a potential testing platform for cell differentiation.

来源:J Dent,查看原文。版权归原作者所有。

引用

  1. Zhang H, Li L, Wang S, et al. Construction of dentin-on-a-chip based on microfluidic technology and tissue engineering. J Dent. 2024. PMID: 38719135. doi:10.1016/j.jdent.2024.105028

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。