文献速递牙体牙髓病

旋转与往复运动镍钛器械在中度及重度弯曲根管中的成形效率:体外研究的系统综述

Shaping Efficiency of Rotary and Reciprocating Kinematics of Engine-driven Nickel-Titanium Instruments in Moderate and Severely curved Root Canals Using Microcomputed Tomography: A Systematic Review of Ex Vivo Studies.
PubMed 文献 · J Endod · 2024-03-25

该系统综述比较连续旋转与往复运动镍钛器械在中度及重度弯曲根管中的成形效率,纳入49项体外研究,使用微计算机断层扫描评估。结果显示连续旋转器械在两种弯曲度下均具有更好的中心定位能力,且在重度弯曲根管中根尖偏移更少;往复运动器械在重度弯曲根管中增加表面积更多,在中度弯曲根管中产生的牙本质微裂纹更少。

要点

  • 连续旋转器械在中度及重度弯曲根管中中心定位能力更优
  • 连续旋转器械在重度弯曲根管中根尖偏移更少
  • 往复运动器械在中度弯曲根管中产生的牙本质微裂纹更少

核心结论

  • 连续旋转系统在解决中度及重度弯曲根管器械成形的主要问题方面似乎优于往复运动系统。

主要发现

  • 连续旋转系统在中度及重度弯曲根管中均具有更好的中心定位能力,且在重度弯曲根管中根尖偏移更少。
  • 没有一种运动学系统能够器械成形整个根管表面区域。
  • 往复运动系统在重度弯曲根管中倾向于提供更高的表面积增加,并在中度弯曲根管中产生更少的牙本质微裂纹。

关键数值与推荐

  • 连续旋转系统在中度及重度弯曲根管中中心定位能力更优。
  • 连续旋转系统在重度弯曲根管中根尖偏移更少。
  • 往复运动系统在重度弯曲根管中表面积增加更高。
  • 往复运动系统在中度弯曲根管中牙本质微裂纹更少。

临床怎么用

  • 对于中度及重度弯曲根管,可优先考虑连续旋转镍钛器械以改善中心定位和减少根尖偏移。
  • 在关注牙本质微裂纹风险的中度弯曲根管中,可考虑使用往复运动镍钛器械。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

INTRODUCTION: This systematic review aimed to compare reciprocating with continuous rotary instrumentation kinematics, by means of microcomputed tomography evaluations, in extracted human permanent teeth with moderate and severe canal curvatures. METHODS: The research protocol was registered in the International Prospective Register of Systematic Reviews and given the reference number CRD42023404035. An electronic search was undertaken in MEDLINE (PubMed), EBSCO, Scopus, Web of Science databases until December 2021. Manual screening of issues in endodontic journals and references of relevant articles were assessed individually. The risk of bias (RoB) of the included articles was evaluated with the QUIN tool (Quality Assessment Tool for In Vitro Studies). RESULTS: Among 1640 retrieved articles, 49 were included in the qualitative synthesis. Fifteen articles had low RoB, 33 articles had medium RoB, and only 1 study was at high RoB. Continuous rotary systems had better centering ability in both moderate and severe canal curvatures and resulted in less apical transportation in severely curved root canals. None of the kinematic systems was capable of instrumenting the entire canal surface area. Reciprocating kinematics systems tended to provide higher increase in surface area of severely curved canals and produced fewer dentinal microcracks in moderately curved canals. CONCLUSIONS: The evidence presented in this review suggests that continuous rotary system seems to be better than reciprocating system in solving the major issues encountered during root canal instrumentation of extracted teeth with moderate and severe curvatures.

来源:J Endod,查看原文。版权归原作者所有。

引用

  1. Călin C, Focșăneanu AM, Paulsen F, et al. Shaping Efficiency of Rotary and Reciprocating Kinematics of Engine-driven Nickel-Titanium Instruments in Moderate and Severely curved Root Canals Using Microcomputed Tomography: A Systematic Review of Ex Vivo Studies. J Endod. 2024. PMID: 38537784. doi:10.1016/j.joen.2024.03.009

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。