金属陶瓷、石墨烯掺杂PMMA与PMMA三单位固定局部义齿老化前后断裂强度的体外研究
结果显示不同材料间有显著差异(p<0.05),所有组老化后断裂载荷和断裂伸长率均降低,但仅PMMA组有统计学意义。结论认为金属陶瓷和石墨烯掺杂PMMA的三单位固定局部义齿断裂强度更高、断裂伸长率更低,且抗老化能力优于PMMA。
要点
- 石墨烯掺杂PMMA的力学行为与抗老化性更接近金属陶瓷,而非普通PMMA。
- 金属陶瓷和石墨烯掺杂PMMA的断裂强度高于PMMA,断裂伸长率低于PMMA。
- 石墨烯掺杂PMMA可考虑用于长期临时修复体。
核心结论
- 金属陶瓷和石墨烯掺杂PMMA三单位固定局部义齿的断裂强度高于PMMA且断裂伸长率更低。
- 金属陶瓷和石墨烯掺杂PMMA的抗老化能力优于PMMA。
研究设计与样本
- 样本随机分为金属陶瓷、石墨烯掺杂PMMA和PMMA三组,每组一半直接测试,另一半老化后测试。
主要发现
- 不同材料间检测到显著差异(p<0.05)。
- 所有组老化后断裂载荷和断裂伸长率均降低,但仅PMMA组有统计学意义(p=2.012e-19;p=3.8e-11)。
临床怎么用
- 石墨烯掺杂PMMA可考虑作为长期临时修复体材料,因其力学行为和抗老化性更接近金属陶瓷而非PMMA。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVES: To evaluate the fracture strength and linear elongation at break of three-units fixed partial dentures (FPDs) fabricated with traditional and new materials for fixed prosthodontics before and after ageing. METHODS: Sixty models of three-units FPDs were fabricated and cemented onto a Co-Cr model simulating the replacement of a maxillary second premolar. The samples were randomly divided into 3 groups: metal-ceramic (MCR), graphene-doped polymethylmethacrylate (PMMA-GR) and polymethylmethacrylate (PMMA). Half of the samples were directly subjected to fracture test, while the remaining half underwent an ageing process and then a fracture loading test using an electrodynamic testing machine. Fracture load and elongation at break values were taken and statistically analysed. RESULTS: Significant differences were detected between the different materials (p<0.05). All groups showed a reduction of the fracture load and elongation at break values after ageing, but not statistically significant, except for PMMA group (p = 2.012e-19) (p = 3.8e-11). CONCLUSIONS: MCR and PMMA-GR three-units FPDs showed higher fracture strength and lower elongation at break compared to PMMA. MCR and PMMA-GR had higher resistance to ageing processes compared to PMMA. CLINICAL SIGNIFICANCE: PMMA-GR could be considered a material for long-term provisional restorations as its mechanical behaviour and ageing resistance are more like MCR than PMMA.
引用
- Ortensi L, Grande F, Testa C, et al. Fracture strength of 3-units fixed partial dentures fabricated with metal-ceramic, graphene doped PMMA and PMMA before and after ageing: An in-vitro study. J Dent. 2024. PMID: 38311017. doi:10.1016/j.jdent.2024.104865
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。