大锥度与低锥度单锉往复式器械的多方法分析:设计、冶金、机械性能与冲洗液流
该体外研究比较了8种热处理镍钛单锉往复式器械(共472支)的设计、冶金、机械性能及模拟根管中的冲洗液流。低锥度器械柔韧性更高、抗循环疲劳时间更长、旋转角度更大,但最大扭矩和切割效率较低,且根尖区冲洗液渗透可能受限。
要点
- 低锥度器械柔韧性更好、抗疲劳断裂时间更长,但抗扭断扭矩和切割效率较低。
- 大锥度器械(Reciproc Blue R25)抗扭断扭矩最高,但柔韧性较差。
- 低锥度器械根尖扩大程度较小,可能影响冲洗液在根尖区的渗透。
核心结论
- 与 大 锥 度 器 械 相 比 , 低 锥 度 往 复 式 器 械 柔 韧 性 更 高 、 断 裂 时 间 更 长 、 旋 转 角 度 更 大 , 但 最 大 断 裂 扭 矩 和 切 割 能 力 较 低 。
- 低 锥 度 系 统 根 尖 区 根 管 预 备 扩 大 程 度 较 小 , 可 能 影 响 冲 洗 液 在 该 区 域 的 渗 透 。
研究设计与样本
- 体 外 研究 , 评 估 472 支 新 的 25-mm 器 械 , 包 括 E-Flex Rex ( 25/.04 和 25/.06 ) 、 Excalibur ( 25/.05 ) 、 Procodile ( 25/.06 ) 、 Reciproc Blue R25 ( 25/.08v ) 、 WaveOne Gold Primary ( 25/.07v ) 、 Univy Sense ( 25/.04 和 25/.06 ) 。
- 评 估 内 容 包 括 设 计 ( 立 体 显 微 镜 、 扫 描 电 子 显 微 镜 、 3D 表 面 扫 描 ) 、 冶 金 ( 能 谱 X 射 线 光 谱 、 差 示 扫 描 量 热 法 ) 、 机 械 性 能 ( 循 环 疲 劳 、 扭 转 阻 力 、 切 割 能 力 、 弯 曲 和 屈 曲 阻 力 ) , 并 通 过 计 算 流 体 力 学 评 估 冲 洗 流 型 、 根 尖 压 力 和 壁 面 剪 切 应 力 。
- 统 计 使 用 Kruskal-Wallis 检 验 和 单 因 素 方 差 分 析 的 Tukey 事 后 检 验 ( α = 5% ) 。
主要发现
- 器 械 在 刃 数 、 螺 旋 角 和 尖 端 设 计 上 存 在 差 异 , 但 均 为 非 切 削 尖 端 、 对 称 刃 和 等 原 子 比 镍 钛 合 金 。
- 除 WaveOne Gold 外 , 横 截 面 设 计 呈 S 形 ; Univy 25/.04 和 Reciproc Blue 在 D3 处 分 别 有 最 小 和 最 大 的 芯 直 径 。
- Univy 25/.04 和 E-Flex Rec 25/.04 断 裂 时 间 最 长 ( p < .05 ) ; Reciproc Blue 和 Univy 25/.04 分 别 具 有 最 高 和 最 低 的 断 裂 扭 矩 ( p < .05 ) 。
- Univy 25/.04 和 Reciproc Blue 旋 转 角 度 最 大 , E-Flex Rec 25/.06 最 小 ( p < .05 ) ; E-Flex Rec 25/.06 、 Procodile 、 Excalibur 和 Reciproc Blue 切 割 能 力 较 好 ( p > .05 ) 。
- Reciproc R25 和 E-Flex Rec 屈 曲 阻 力 最 高 ( p < .05 ) , WaveOne Gold 柔 韧 性 最 差 ; Univy 25/.04 和 E-Flex Rec 25/.06 分 别 产 生 最 高 和 最 低 的 壁 面 剪 切 应 力 与 根 尖 压 力 。
关键数值与推荐
- 断 裂 时 间 : Univy 25/.04 和 E-Flex Rec 25/.04 最 长 ( p < .05 ) 。
- 断 裂 扭 矩 : Reciproc Blue 最 高 , Univy 25/.04 最 低 ( p < .05 ) 。
- 旋 转 角 度 : Univy 25/.04 和 Reciproc Blue 最 大 , E-Flex Rec 25/.06 最 小 ( p < .05 ) 。
- 切 割 能 力 : E-Flex Rec 25/.06 、 Procodile 、 Excalibur 和 Reciproc Blue 较 好 ( p > .05 ) 。
- 屈 曲 阻 力 : Reciproc R25 和 E-Flex Rec 最 高 ( p < .05 ) , WaveOne Gold 柔 韧 性 最 差 。
临床怎么用
- 临 床 选 择 低 锥 度 往 复 式 器 械 时 , 可 利 用 其 高 柔 韧 性 和 抗 疲 劳 优 势 , 但 需 注 意 其 抗 扭 断 能 力 和 切 割 效 率 较 低 。
- 使 用 低 锥 度 器 械 预 备 根 管 时 , 应 警 惕 根 尖 区 扩 大 不 足 可 能 影 响 冲 洗 液 渗 透 , 可 辅 助 冲 洗 策 略 。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
AIM: To compare eight large- and low-tapered heat-treated reciprocating instruments regarding their design, metallurgy, mechanical properties, and irrigation flow through an in silico model. METHODOLOGY: A total of 472 new 25-mm E-Flex Rex (25/.04 and 25/.06), Excalibur (25/.05), Procodile (25/.06), Reciproc Blue R25 (25/.08v), WaveOne Gold Primary (25/.07v), and Univy Sense (25/.04 and 25/.06) instruments were evaluated regarding their design (stereomicroscopy, scanning electron microscopy, and 3D surface scanning), metallurgy (energy-dispersive X-ray spectroscopy and differential scanning calorimetry), and mechanical performance (cyclic fatigue, torsional resistance, cutting ability, bending and buckling resistance). Computational fluid dynamics assessment was also conducted to determine the irrigation flow pattern, apical pressure, and wall shear stress in simulated canal preparations. Kruskal-Wallis and one-way anova post hoc Tukey tests were used for statistical comparisons (α = 5%). RESULTS: Instruments presented variations in blade numbers, helical angles, and tip designs, with all featuring non-active tips, symmetrical blades, and equiatomic nickel-titanium ratios. Cross-sectional designs exhibited an S-shaped geometry, except for WaveOne Gold. Univy 25/.04 and Reciproc Blue displayed the smallest and largest core diameters at D3. Univy 25/.04 and E-Flex Rec 25/.04 demonstrated the longest time to fracture (p < .05). Reciproc Blue and Univy 25/.04 exhibited the highest and lowest torque to fracture, respectively (p < .05). Univy 25/.04 and Reciproc Blue had the highest rotation angles, whilst E-Flex Rec 25/.06 showed the lowest angle (p < .05). The better cutting ability was observed with E-Flex Rec 25/.06, Procodile, Excalibur, and Reciproc Blue (p > .05). Reciproc R25 and E-Flex Rec showed the highest buckling resistance values (p < .05), with WaveOne Gold being the least flexible instrument. The impact of instruments' size and taper on wall shear stress and apical pressure did not follow a distinct pattern, although Univy 25/.04 and E-Flex Rec 25/.06 yielded the highest and lowest values for both parameters, respectively. CONCLUSIONS: Low-tapered reciprocating instruments exhibit increased flexibility, higher time to fracture, and greater angles of rotation, coupled with reduced maximum bending loads and buckling strength compared to large-tapered instruments. Nevertheless, low-tapered systems also exhibit lower maximum torque to fracture and inferior cutting ability, contributing to a narrower apical canal enlargement that may compromise the penetration of irrigants in that region.
引用
- Silva EJNL, Peña-Bengoa F, Ajuz NC, et al. Multimethod analysis of large- and low-tapered single file reciprocating instruments: Design, metallurgy, mechanical performance, and irrigation flow. Int Endod J. 2024. PMID: 38376108. doi:10.1111/iej.14047
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。