文献速递口腔修复与种植

3D打印多孔结构牙种植体的体外细胞响应研究

3D printed dental implants with a porous structure: The in vitro response of osteoblasts, fibroblasts, mesenchymal stem cells, and monocytes.
PubMed 文献 · J Dent · 2023-11-10

本研究表征了选区激光熔化并有机酸蚀刻的3D打印Ti-6Al-4V牙种植体表面形貌,并与机加工表面比较,评估人口腔成骨细胞、牙龈成纤维细胞、脂肪间充质干细胞和单核细胞的增殖、黏附、基因表达、矿化及胶原产生等反应。结果显示多孔粗糙表面促进细胞黏附与成骨相关标志物表达,干细胞内皮/成骨分化标志增加,单核细胞M2抗炎表型mRNA合成增加。

要点

  • 3D打印多孔钛表面呈高度互连孔隙和粗糙形貌
  • 该表面对成骨细胞、成纤维细胞、干细胞和单核细胞均显示良好黏附
  • 干细胞成骨/内皮标志及单核细胞M2抗炎标志mRNA表达增加

核心结论

  • 3D打印多孔种植体与多种口腔细胞相互作用良好,可能适用于未来临床应用。

研究设计与样本

  • 体外研究,对比选区激光熔化并有机酸蚀刻的3D打印Ti-6Al-4V种植体(TEST)与机加工表面(CTRL)。

主要发现

  • 扫描电镜显示TEST组具有高度互连的多孔结构和粗糙表面。
  • 形态学观察显示TEST表面培养细胞黏附良好,成骨细胞生长显著增加。
  • 基因表达分析显示TEST组骨整合生物标志物水平显著更高。
  • 天狼星红染色显示TEST组胶原产生较CTRL组轻微增加。
  • 脂肪间充质干细胞内皮和成骨承诺相关标志增加,单核细胞M2抗炎巨噬表型相关mRNA合成增加。

临床怎么用

  • 提示该多孔3D打印表面可能有利于骨整合和抗炎微环境,但尚未提供临床推荐剂量或阈值。

局限性

  • 原文未报告样本量、具体统计值和P值等细节。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

AIMS: The first aim of this study was to characterize the surface topography of a novel 3D-printed dental implant at the micro- and macro-level. Its second aim was to evaluate the osteogenic, angiogenic, and immunogenic responses of human oral osteoblasts (hOBs), gingival fibroblasts (hGFs), mesenchymal stem cells (hAD-MSCs), and monocytes to this novel implant surface. METHODS: A 3D-printed Ti-6Al-4 V implant was produced by selective laser melting and subjected to organic acid etching (TEST). It was then compared to a machined surface (CTRL). Its biological properties were evaluated via cell proliferation assays, morphological observations, gene expression analyses, mineralization assessments, and collagen quantifications. RESULTS: Scanning electron microscopy analysis showed that the TEST group was characterized by a highly interconnected porous architecture and a roughed surface. The morphological observations showed good adhesion of cells cultured on the TEST surface, with a significant increase in hOB growth. Similarly, the gene expression analysis showed significantly higher levels of osseointegration biomarkers. Picrosirius staining showed a slight increase in collagen production in the TEST group compared to the CTRL group. hAD-MSCs showed an increase in endothelial and osteogenic commitment-related markers. Monocytes showed increased mRNA synthesis related to the M2 (anti-inflammatory) macrophagic phenotype. CONCLUSIONS: Considering the higher interaction with hOBs, hGFs, hAD-MSCs, and monocytes, the prepared 3D-printed implant could be used for future clinical applications. CLINICAL RELEVANCE: This study demonstrated the excellent biological response of various cells to the porous surface of the novel 3D-printed implant.

来源:J Dent,查看原文。版权归原作者所有。

引用

  1. Iezzi G, Zavan B, Petrini M, et al. 3D printed dental implants with a porous structure: The in vitro response of osteoblasts, fibroblasts, mesenchymal stem cells, and monocytes. J Dent. 2023. PMID: 37951493. doi:10.1016/j.jdent.2023.104778

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。