文献速递牙体牙髓病

牛牙本质中精密铣削模拟弯曲根管用于评估化学机械根管预备

Precision-milled simulated curved root canals in bovine dentine for the assessment of chemo-mechanical root canal preparation.
PubMed 文献 · Int Endod J · 2023-10-15

研究用数控铣削在牛牙本质中制作标准化弯曲根管模型,并与树脂训练块比较化学机械预备后的根管偏移。牙本质显微硬度是树脂的三倍以上,但根管偏移在牙本质中明显更大,且EDTA有增加偏移的趋势;基底材料对根管偏移有显著影响(p < .001)。

要点

  • 数控铣削可在牛牙本质中制作高度一致的模拟弯曲根管。
  • 牙本质显微硬度是树脂的三倍以上,但根管偏移反而更大。
  • 基底材料对根管偏移有显著影响(p < .001),冲洗液无总体效应。

核心结论

  • 数控铣削可在牛牙本质中制作标准化模拟弯曲根管,可用于测试和比较化学机械根管预备的材料与概念。
  • 显微硬度是整体特征,不能预测如牙本质这类复合材料对化学机械预备的响应。

研究设计与样本

  • 用高精度数控铣削将树脂训练块(Endo Training Bloc J-Shape,size 15)的模拟根管复制到纵向剖开再拼合的牛切牙根中。
  • 用10个树脂块的光学重叠图像确定平均根管并编程铣削。
  • 树脂与牙本质模拟根管在37°C下用Reciproc R25器械配合水或17% EDTA预备(n = 10)。
  • 用开源图像处理软件叠加分析数字显微镜下的术前术后图像,计算中心比率平均值表示根管偏移。
  • 用双因素方差分析评估基底材料和冲洗液对根管偏移的影响。

主要发现

  • 叠加图像显示所用树脂块在模拟根管长度和弯曲度上差异较大,而铣削根管高度相似。
  • 牙本质显微硬度是树脂的三倍以上。
  • 根管偏移在牙本质中明显大于树脂,且在牙本质中有被EDTA增加的趋势。
  • 基底材料对根管偏移有强效应(p < .001),冲洗液无总体效应,冲洗液与基底材料交互作用边缘显著(p = .077)。

临床怎么用

  • 牛牙本质数控铣削模型可用于标准化测试化学机械根管预备的材料和概念。
  • 评估根管偏移时需考虑基底材料差异,树脂训练块结果不能直接外推至牙本质。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

AIM: The aim was to develop a standardized curved root canal model in bovine dentine and to assess whether that natural substrate would behave differently from the resin in standard plastic training blocks when prepared chemo-mechanically. The impact of substrate microhardness on simulated canal transportation was considered. METHODOLOGY: High-precision computer numerical control (CNC) milling was used to recreate a simulated root canal from a resin training block (Endo Training Bloc J-Shape, size 15) in longitudinally sectioned, dis- and re-assembled bovine incisor roots. Optical overlays obtained from 10 resin blocks were used to identify an average canal and program the CNC milling apparatus accordingly. Resin and dentine microhardness were measured. Simulated root canals in resin training blocks and their bovine counterparts were then instrumented at 37°C using Reciproc R25 instruments (VDW) with water or 17% EDTA (n = 10). Open-access image processing software was used to superimpose and analyse pre- and postoperative images obtained with a digital microscope. Centering ratios were averaged to indicate canal transportation. The effects of substrate and irrigant on canal transportation were assessed by two-way anova. RESULTS: Superimposed images showed that resin blocks under investigation varied considerably in terms of simulated canal length and curvature, whilst the milled canals were highly similar. The microhardness of dentine was more than three times higher than that of the resin. Conversely, canal transportation was considerably greater in dentine compared to resin, and in dentine had a tendency to be increased by EDTA. There was a strong effect of substrate on canal transportation (p < .001), no overall effect of irrigant, and a marginally significant interaction between irrigant and substrate (p = .077). CONCLUSIONS: CNC milling allows to create standardized simulated curved root canals in bovine dentine. These models may be useful to test and compare materials and concepts of chemo-mechanical root canal instrumentation. Microhardness is a bulk feature that does not predict the response to chemo-mechanical instrumentation of a composite material such as dentine.

来源:Int Endod J,查看原文。版权归原作者所有。

引用

  1. Hofpeter K, Zehnder M, Hülsmann M, et al. Precision-milled simulated curved root canals in bovine dentine for the assessment of chemo-mechanical root canal preparation. Int Endod J. 2023. PMID: 37840198. doi:10.1111/iej.13988

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。