文献速递口腔修复与种植

两段式根形种植体:结构致密、粗糙度均匀且精度高

A 2-Stage Root Analog Implant with Compact Structure, Uniform Roughness, and High Accuracy.
PubMed 文献 · J Dent Res · 2023-04-10

本研究采用选择性激光熔化技术制造新型根形种植体(RAI),在优化条件下打印的RAI内部密度达99.73%,表面粗糙度均匀为11 μm(Sa),与设计模型偏差控制在0.15 mm以内。体外实验显示打印基板可促进人骨髓基质细胞增殖、铺展及成骨分化;体内实验中RAI的骨-种植体接触率(BIC,75%±7%)和骨体积/总体积(BV/TV,74%±7%)显著高于常规种植体(BIC,66%±5%;BV/TV,62%±5%)。

要点

  • SLM打印RAI内部密度99.73%,表面粗糙度均匀11 μm(Sa),与设计模型偏差≤0.15 mm。
  • RAI基板可促进人骨髓基质细胞增殖、铺展和成骨分化。
  • 体内实验中RAI的BIC和BV/TV显著高于常规种植体。

核心结论

  • 设计并制造了个性化两段式根形种植体(RAI),具有致密结构、均匀粗糙度和高精度,旨在实现更好的抗折性、初始骨结合效率和应力分散。

研究设计与样本

  • 采用选择性激光熔化技术制造RAI,在优化条件下打印并评估其内部密度、表面粗糙度和尺寸偏差。
  • 体外实验评估打印基板对人骨髓基质细胞增殖、铺展和成骨分化的影响。
  • 体内实验比较RAI与常规种植体的骨-种植体接触率(BIC)和骨体积/总体积(BV/TV)。
  • 为RAI设计定制基台,评估比格犬冠修复后的咀嚼能力。

主要发现

  • 优化条件下RAI内部密度为99.73%,表面粗糙度均匀为11 μm(Sa)。
  • 优化扫描参数后RAI试样与设计模型偏差控制在0.15 mm以内。
  • 打印基板可促进人骨髓基质细胞增殖、铺展和成骨分化。
  • 体内实验中RAI的BIC为75%±7%,显著高于常规种植体的66%±5%。
  • 体内实验中RAI的BV/TV为74%±7%,显著高于常规种植体的62%±5%。

临床怎么用

  • 本研究为标准化RAI在即刻种植中的制造和临床应用提供一定指导价值。

局限性

  • 原文未述局限性

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

Immediate implant placement has the advantages of shortening the operation time, reducing the treatment cycle and cost. At present, this technology has been used widely, but the indications of immediate implantation are still limited. Here, a novel type of root analog implant (RAI) was manufactured by selective laser melting technology to address the limitation. Under optimized condition, RAIs were printed with the internal density of 99.73% and the uniform surface roughness of 11 μm (Sa). Besides, the deviation between RAI specimen and design models is controlled within 0.15 mm after optimizing scanning parameters. The substrate printed could promote human bone marrow stromal cell proliferation, spreading, and osteogenic differentiation. The bone-implant contact (BIC, 75% ± 7%) and bone volume/total volume (BV/TV, 74% ± 7%) of RAIs were significantly higher than that of conventional implants (BIC, 66% ± 5%; BV/TV, 62% ± 5%) in in vivo experiments. Further, customized abutments were designed for the RAIs, improving the masticatory ability of the beagle dogs after crown restoration. This study aims to design a personalized 2-stage RAI with compact structure and uniform roughness, in order to achieve better fracture resistance, initial osseointegration efficiency, and dispersed stress in immediate implantation. It provides a certain guiding value for standardizing the manufacture and clinical application of RAI in immediate implantation.

来源:J Dent Res,查看原文。版权归原作者所有。

引用

  1. Yu X, Feng B, Lan Y, et al. A 2-Stage Root Analog Implant with Compact Structure, Uniform Roughness, and High Accuracy. J Dent Res. 2023. PMID: 37036092. doi:10.1177/00220345231160670

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。