集中式CAD-CAM工作流程制作种植体牙冠的时间效率与效果:前瞻性对照临床研究
本研究将59例单颗后牙种植患者随机分配至集中式数字化工作流程(c-DW)或技工室数字化工作流程(l-DW),评估种植体牙冠制作的时间效率与修复效果。c-DW组取模时间和技工室操作时间均显著短于l-DW组,但交付时间显著更长;两组在试戴和交付时的修复制作效果相似。
要点
- c-DW组取模时间9.4±3.5分钟,显著短于l-DW组的15.1±4.6分钟(p<0.05)。
- c-DW组技工室操作时间130±31分钟,显著短于l-DW组的218.0±8分钟(p<0.05)。
- c-DW组交付时间5.9±3.5天,显著长于l-DW组的0.5±0.05天。
核心结论
- c-DW相比l-DW具有更高的时间效率,且修复制作效果相似。
研究设计与样本
- 前瞻性对照临床研究,59例单颗后牙种植患者随机分配至集中式数字化工作流程(c-DW,试验组)或技工室数字化工作流程(l-DW,对照组)。
主要发现
- 取模时c-DW组纳入12例、l-DW组纳入19例;取模时间c-DW组9.4±3.5分钟 vs l-DW组15.1±4.6分钟(p<0.05)。
- 技工室操作时间c-DW组130±31分钟 vs l-DW组218.0±8分钟(p<0.05)。
- 交付时间c-DW组5.9±3.5天 vs l-DW组0.5±0.05天,c-DW组显著更长。
- 试戴和交付时,两种工作流程的修复制作效果相似且均较高。
关键数值与推荐
- c-DW制作定制钛基台和整体氧化锆冠;l-DW将模型数字化后使用标准化钛基台进行CAD-CAM制作整体氧化锆冠。
- 效率与效果分析排除需制作除该单颗种植冠以外任何额外修复体的患者。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVE: To assess time efficiency and the efficacy of the prosthetic manufacturing for implant crown fabrication in a centralized workflow applying computer aided design and computer aided manufacturing (CAD-CAM). MATERIAL AND METHODS: Fifty-nine patients with one posterior implant each, were randomly allocated to either a centralized digital workflow (c-DW, test) or a laboratory digital workflow (l-DW, control). Patients were excluded from efficiency and efficacy analyses, if any additional restoration than this single implant crown had to be fabricated. A customized titanium abutment and a monolithic zirconia crown were fabricated in the c-DW. In the l-DW, models were digitalized for CAD-CAM fabrication of a monolithic zirconia crown using a standardized titanium base abutment. Time for impression, laboratory operating and delivery time were recorded. The efficacy of the prosthetic manufacturing was evaluated at try-in and at delivery. Data was analyzed descriptively. Statistical analyses using student's unpaired t- and paired Wilcoxon were performed (p < 0.05). RESULTS: At impression taking, 12 patients (c-DW) and 19 patients (l-DW) were included. The impression time was 9.4±3.5 min (c-DW) and 15.1 ± 4.6 min (l-DW) (p < 0.05). The laboratory operating time was 130 ± 31 min (c-DW) and 218.0±8 min (l-DW) (p < 0.05). The delivery time was significantly longer in the c-DW (5.9 ± 3.5 1 days) as compared to the l-DW (0.5±0.05 days). At try-in and at delivery, efficacy of prosthetic manufacturing was similar high in both workflows. CLINICAL RELEVANCE: The c-DW was more time efficient compared to the lab-DW and rendered a similar efficacy of prosthetic manufacturing.
引用
- Mühlemann S, Lamperti ST, Stucki L, et al. Time efficiency and efficacy of a centralized computer-aided-design/computer-aided-manufacturing workflow for implant crown fabrication: A prospective controlled clinical study. J Dent. 2022. PMID: 36252858. doi:10.1016/j.jdent.2022.104332
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。