表面湿度、种植体角度和种植体间距对全牙弓种植扫描准确性和扫描时间的影响
本研究评估种植体角度、湿度和种植体间距对全牙弓种植扫描准确性和扫描时间的影响。使用4个平行种植体基台代型的模型(P组)和4个角度(最大30度)种植体基台代型的模型(NP组),分别在干燥(D亚组)和人工唾液湿润(W亚组)条件下用口内扫描仪TRIOS 3扫描。结果显示种植体角度、湿度和种植体间距均影响扫描准确性和扫描时间;平行种植体获得更高的正确度和精确度,干燥条件正确度和精确度略高且扫描时间更短。
要点
- 种植体角度、湿度和种植体间距影响全牙弓种植扫描的准确性和扫描时间。
- 平行种植体比角度种植体获得更高的正确度和精确度。
- 干燥条件比湿润条件扫描正确度和精确度略高,扫描时间更短。
核心结论
- 种植体角度、湿度和种植体间距影响全牙弓种植扫描的准确性和扫描时间。
- 平行种植体获得更高的正确度和精确度值。
- 干燥条件获得略高的扫描正确度和精确度,且扫描时间更短。
研究设计与样本
- 使用4个平行种植体基台代型的模型(P组)和4个角度(最大30度)种植体基台代型的模型(NP组),用7Series扫描仪数字化获得参考扫描。
- 创建干燥(D亚组)和湿润(W亚组)两个亚组:D亚组不改变表面湿度,用口内扫描仪TRIOS 3扫描;W亚组用人工唾液湿润模型表面后,用同一口内扫描仪扫描。
- 通过计算线性和角度测量评估种植体间距偏差;正确度数据采用三因素方差分析及Tukey两两比较检验;精确度采用Bartlett检验及两两比较检验(α=.05)。
主要发现
- 关于正确度,种植体角度(P<.001)和种植体间距测量(P<.001)影响线性偏差。
- 种植体角度(P=.002)、湿度条件(P<.001)和种植体间距(P=.001)影响角度偏差。
- 关于精确度,线性和角度测量及种植体间距的方差存在显著差异。
- 湿度条件(P<.001)影响扫描时间。
临床怎么用
- 干燥待扫描表面可提高口内扫描准确性并减少口内扫描时间。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVES: To assess the influence of implant angulation, humidity, and interimplant distance on the accuracy and scanning time of complete-arch implant scans. METHODS: A definitive cast with 4 parallel implant abutment analogs (P group), and another cast with 4 angulated (up to 30 degrees) implant abutment analogs (NP group) were digitized by using a scanner (7Series) (reference scans). Two subgroups were created: dry (D subgroup) and wet (W subgroup). For the D subgroup, the casts were digitized without altering the surface humidity by using an intraoral scanner (IOS) (TRIOS 3). For the W subgroup, the cast surface was humidified with artificial saliva and digitized by using the same IOS. The interimplant distance discrepancies were assessed by computing linear and angular measurements. Trueness data was analyzed using 3-way ANOVA followed by the pairwise comparison Tukey tests. The Bartlett test, followed by the pairwise comparison tests, was used to assess the precision (α=.05). RESULTS: Regarding the trueness, implant angulation (P<.001) and inter-implant distance measurement (P<.001) influenced the linear discrepancies. Implant angulation (P=.002), humidity conditions (P<.001), and inter-implant distance (P=.001) influenced the angular discrepancies. Regarding the precision, significant differences in the variance of linear and angular measurements and inter-implant distances were found. Humidity conditions (P<.001) influenced the scanning time. CONCLUSIONS: Implant angulation, humidity, and interimplant distance influenced the accuracy and scanning time of complete-arch implant scans. Parallel implants resulted in higher trueness and precision values. Dry conditions resulted in slightly higher scanning trueness and precision and shorter scanning time. CLINICAL SIGNIFICANCE: Drying the surface being scanned increases intraoral scanning accuracy and decreases intraoral scanning time.
引用
- Gómez-Polo M, Ortega R, Sallorenzo A, et al. Influence of the surface humidity, implant angulation, and interimplant distance on the accuracy and scanning time of complete-arch implant scans. J Dent. 2022. PMID: 36162637. doi:10.1016/j.jdent.2022.104307
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。