用于隐形矫治器治疗的 orthodontic 模型精度:不同市场定位 3D 打印方案的 3D 影像分析比较
研究用 80 个相同牙颌模型(排列整齐组与拥挤组)经四款不同技术/市场定位 3D 打印机成型,扫描叠加评估真实度与精密度(均方根值);SLA 打印机真实度误差低于 LCD/DLP(p < 0.001),Elegoo Mars Pro 精密度误差高于其他打印机(P < 0.001),拥挤组在 LCD/DLP 打印机下真实度误差高于整齐组(p < 0.001),精度误差均在制作隐形矫治器可接受的临床误差内(< 0.25 mm),入门级打印机接近该值。
要点
- SLA 打印模型真实度误差低于 LCD/DLP 打印机(p < 0.001)。
- Elegoo Mars Pro 精密度误差高于其他打印机(P < 0.001)。
- 拥挤牙列在 LCD/DLP 打印时真实度误差高于整齐牙列(p < 0.001)。
核心结论
- 用于隐形矫治器的 orthodontic 模型精度可受所用 3D 打印机的不同技术/市场定位影响。
研究设计与样本
- 从两个主数字文件(.stl)生成 80 个相同牙颌模型,分别为排列整齐(AM 组)与拥挤牙列(CM 组),经四款 3D 打印机成型:Asiga Pro 4K65(DLP 技术,高专业级)、Elegoo Mars Pro(LCD 技术,入门级)、Form 3B(SLA 技术,中专业级)、Vector 3SP(SLA 技术,工业级)。
- 每个 3D 打印模型经扫描并与主文件叠加,用偏差分析评估真实度与精密度(均方根值),所有数据进行统计学分析(p < 0.05)。
主要发现
- SLA 打印机成型的模型真实度误差低于 LCD/DLP 打印机(p < 0.001)。
- Elegoo Mars Pro 成型的模型精密度误差高于其他打印机(P < 0.001)。
- CM 组模型在 LCD/DLP 打印机成型时真实度误差高于 AM 组(p < 0.001)。
- 精度误差值均在制作隐形矫治器可接受的临床误差内(< 0.25 mm),入门级 3D 打印机几乎达到该值。
关键数值与推荐
- 精度误差可接受的临床误差为 < 0.25 mm,入门级 3D 打印机几乎达到该值。
临床怎么用
- 使用入门级 3D 打印机制作隐形矫治器时应谨慎。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVES: This study aimed to evaluate the accuracy of orthodontic models for the production of clear aligners generated with four 3D printers featuring different technologies and belonging to different market segments. MATERIALS AND METHODS: Eighty identical dental models were generated from two master digital files (.stl), respectively with aligned (AM group) and crowded dentition (CM group), and prototyped via four different 3D printers, i.e., Asiga Pro 4K65 (DLP technology, high-professional segment), Elegoo Mars Pro (LCD technology, entry-level segment), Form 3B (SLA technology, medium-professional segment) and Vector 3SP (SLA technology, industrial segment). Each 3D printed model was scanned and superimposed with the master file, and deviation analysis was used to evaluate trueness and precision (root mean square values). All data were statistically analyzed (p < 0.05). RESULTS: The trueness error was lower in models prototyped with SLA printers compared to the LCD/DLP printers (p < 0.001); models prototyped with Elegoo Mars Pro-showed higher precision error compared to the other printers (P < 0.001). The models in the CM group showed higher trueness error compared to AM group when prototyped with LCD/DLP printers (p < 0.001). Accuracy error values were within the accepted clinical error for producing clear aligners (< 0.25 mm), with the entry-level 3D printer almost reaching this value. CONCLUSION: The accuracy of orthodontic models generated for clear aligners can be influenced by different technologies/market segments of the 3D printers used. CLINICAL RELEVANCE: Caution should be taken with entry-level 3D printers for producing clear aligners.
引用
- Venezia P, Ronsivalle V, Rustico L, et al. Accuracy of orthodontic models prototyped for clear aligners therapy: A 3D imaging analysis comparing different market segments 3D printing protocols. J Dent. 2022. PMID: 35792192. doi:10.1016/j.jdent.2022.104212
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。