文献速递口腔修复与种植

体外研究:无牙颌多颗种植体扫描时不同辅助装置的光学扫描精度

In vitro scanning accuracy using different aids for multiple implants in the edentulous arch.
PubMed 文献 · Clin Oral Implants Res · 2022-07-28

本体外研究在无牙上颌六颗种植体的主模型上,将通用扫描辅助装置按三种设计(圆形、方形、不规则形)和三种颜色(米色、灰色、白色)应用于种植体扫描杆,每种辅助装置用口内扫描仪扫描十次,以台式光学扫描仪作参考扫描,评估真度与精密度。结果显示米色不规则形辅助装置真度最高,与未夹板扫描相比有显著差异;精密度结果较不一致且使用辅助装置时下降;不规则灰色辅助装置因断裂伸长率增加而便于使用。结论认为该辅助装置较未夹板扫描可改善真度,但米色不规则形虽真度最高,其材料断裂强度差,需进一步改进。

要点

  • 米色不规则形扫描辅助装置真度最高,与未夹板扫描相比有显著差异。
  • 使用扫描辅助装置时精密度结果较不一致且下降。
  • 不规则灰色辅助装置因断裂伸长率增加而便于使用,但材料断裂强度差需改进。

核心结论

  • 与未夹板扫描相比,所评估的扫描辅助装置可改善真度。
  • 米色不规则形设计真度最高,但所用材料断裂强度差,需进一步改进。

研究设计与样本

  • 体外研究,在无牙上颌六颗种植体的主模型上应用通用扫描辅助装置。
  • 辅助装置设三种设计(圆形、方形、不规则形)和三种颜色(米色、灰色、白色)。
  • 每种辅助装置用口内扫描仪扫描十次,参考扫描使用台式光学扫描仪。
  • 在三维建模与检查软件中以第一颗扫描杆对齐,用有符号最近邻法计算真度与精密度偏差,并进行统计学分析(α = .05)。

主要发现

  • 总体而言,米色不规则形扫描辅助装置真度最高,与未夹板扫描相比有显著差异。
  • 精密度结果较不一致,使用扫描辅助装置时精密度下降。
  • 不规则灰色扫描辅助装置因断裂伸长率增加而便于使用。

局限性

  • 原文指出米色不规则形设计虽真度最高,但所用测试材料断裂强度差,需进一步改进。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVES: Optical impressions of implants in the edentulous arch are challenged by the absence of distinct surface morphology between multiple implant scan bodies. The purpose of this in vitro study was to evaluate a newly developed scan aid in various designs and colors to improve the accuracy of multi-implant scans. MATERIALS AND METHODS: A universal scan aid in three different designs (circular, square, irregular) and three different materials (colors: beige, gray, white) was applied to the implant scan bodies of a master model of six implants in an edentulous maxilla. Ten scans using an intra-oral scanner of each scan aid were acquired. Reference scanning was performed using a desktop optical scanner. Alignment of scans was performed at the first scan body in a three-dimensional modeling and inspection software and deviations for trueness and precision were calculated using the signed nearest-neighbor method and then statistically analyzed (α = .05). RESULTS: Overall, the beige irregular scan aid had the highest trueness and showed significant differences compared to unsplinted scans. The precision showed more heterogenous results and decreased when using the scan aid. Ease of use was observed with the irregular gray scan aid due to its increased elongation at break. CONCLUSIONS: The evaluated scan aid led to improved trueness when compared to unsplinted scans. Even though the irregular design in beige color showed highest trueness, the poor fracture strength of the tested material requires further improvement.

来源:Clin Oral Implants Res,查看原文。版权归原作者所有。

引用

  1. Kernen FR, Recca M, Vach K, et al. In vitro scanning accuracy using different aids for multiple implants in the edentulous arch. Clin Oral Implants Res. 2022. PMID: 35861128. doi:10.1111/clr.13982

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。