后牙种植患者上颌前牙牙龈与骨形态的数字化分析
前瞻性纳入64例拟行后牙种植修复患者,按牙周表型分为薄龈型29例和厚龈型35例,用口内扫描和锥形束CT测量上前牙牙龈与牙槽骨形态。不同牙位牙冠、牙龈和骨形态不同,薄龈型与厚龈型在宽长比、龈乳头高度、骨乳头高度及龈缘、骨缘角度上存在差异,牙龈乳头高度与骨乳头高度正相关。
要点
- 上颌中切牙、侧切牙、尖牙的牙冠宽长比、龈乳头高度、骨乳头高度及龈缘、骨缘角度各不相同。
- 薄龈型牙冠宽长比、龈缘角度、骨缘角度小于厚龈型,龈乳头和骨乳头高度大于厚龈型。
- 上前牙龈乳头高度与骨乳头高度正相关,骨乳头高度与骨缘角度高度负相关。
核心结论
- 上前牙不同牙位的牙冠形态、牙龈形态与牙槽骨形态各不相同;不同牙周表型患者上前牙牙冠宽长比、龈乳头高度、骨乳头高度、龈缘角度、骨缘角度不同。
研究设计与样本
- 前瞻性选取2020年5月至2021年5月于第四军医大学口腔医学院口腔修复科行种植修复的后牙缺失患者64例,男性24例、女性40例,年龄(25.6±3.3)岁。
- 按牙周表型分为薄龈型29例和厚龈型35例,采用口内扫描仪扫描并拍摄锥形束CT,用Geomagic和Mimics软件测量上前牙唇侧指标。
主要发现
- 上颌中切牙、侧切牙、尖牙牙冠宽长比分别为0.85±0.08、0.80±0.08和0.86±0.09(F=10.71,P<0.01)。
- 上颌中切牙间、中切牙与侧切牙间、侧切牙与尖牙间龈乳头高度分别为(3.93±0.86)、(3.47±0.84)和(3.38±0.91)mm(F=7.44,P<0.01),骨乳头高度分别为(3.44±0.88)、(3.12±0.75)和(2.72±0.63)mm(F=14.26,P<0.01)。
- 上颌中切牙、侧切牙、尖牙龈缘角度分别为88.3°±7.7°、84.7°±8.9°和81.2°±6.6°(F=13.15,P<0.01),骨缘角度分别为103.2°±13.1°、99.5°±11.2°和110.6°±13.0°(F=13.25,P<0.01)。
- 薄龈型牙冠宽长比(0.81±0.08)、龈缘角度(82.2°±7.4°)、骨缘角度(99.4°±12.9°)均小于厚龈型(0.85±0.09、86.5°±8.6°、108.5°±11.4°)(t=-2.79、3.63、5.20,P<0.01);薄龈型龈乳头高度(3.93±0.81)mm和骨乳头高度(3.43±0.80)mm大于厚龈型(3.34±0.84)和(2.85±0.71)mm(t=-4.89、-5.36,P<0.01)。
关键数值与推荐
- 上前牙龈乳头高度与骨乳头高度呈中等程度正相关(r=0.66,P<0.01)。
- 上前牙牙冠宽长比与骨缘角度呈中等程度正相关(r=0.42,P<0.01)。
- 上前牙龈乳头高度与骨缘角度呈中等程度负相关(r=-0.58,P<0.01),骨乳头高度与骨缘角度呈高度负相关(r=-0.82,P<0.01)。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
Objective: To explore and analyze the correlation between labial gingival morphology and alveolar bone morphology of maxillary anterior teeth in patients with posterior dental implant, so as to provide reference basis for restoration design and esthetic reconstruction of anterior teeth. Methods: Sixty-four patients [24 males, 40 females (25.6±3.3) years old] who planned to receive posterior dental implant restoration were recruited randomly with the inclusion and exclusion criteria in Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University from May 2020 to May 2021. According to the visibility of periodontal probe through gingival margin, the subjects were divided into thin and thick gingival biotypes, including 29 cases of thin biotype and 35 cases of thick biotype. The 3Shape software was used to perform oral scanning, and cone beam CT (CBCT) was taken for each patient. Geomagic and Mimics software were used to measure and record the labial crown width and length, gingival papilla height, gingival angle, bone papilla height and bone margin angle of maxillary anterior teeth. Results: The crown width length ratios of maxillary central incisors, lateral incisors and canines were 0.85±0.08, 0.80±0.08 and 0.86±0.09 (F=10.71, P<0.01). The height of gingival papilla between maxillary central incisors, between central incisors and lateral incisors, between lateral incisors and canines were (3.93±0.86), (3.47±0.84) and (3.38±0.91) mm respectively (F=7.44, P<0.01), and the height of corresponding bone papilla were (3.44±0.88), (3.12±0.75) and (2.72±0.63) mm respectively (F=14.26, P<0.01). The gingival margin angles of maxillary central incisors, lateral incisors and canines were 88.3°±7.7°, 84.7°±8.9° and 81.2°±6.6° (F=13.15, P<0.01), and the bone margin angles were 103.2°±13.1°, 99.5°±11.2° and 110.6°±13.0° (F=13.25, P<0.01). The crown width length ratio (0.81±0.08), gingival margin angle (82.2°±7.4°) and bone margin angle (99.4°±12.9°) of thin gingival subjects were significantly lower than those of thick gingival subjects (0.85±0.09, 86.5°±8.6°, 108.5°±11.4°) (t=-2.79, 3.63, 5.20, P<0.01). The height of gingival papilla [(3.93±0.81) mm] and bone papilla [(3.43±0.80) mm] in thin gingival subjects were significantly lower than those in thick gingival subjects [(3.34±0.84) and (2.85±0.71) mm, respectively] (t=-4.89, -5.36, P<0.01). The height of labial gingival papilla of upper anterior teeth was positively correlated with that of bone papilla in all patients (r=0.66, P<0.01); the ratio of crown width to length of upper anterior teeth was positively correlated with the angle of bone margin (r=0.42, P<0.01); the height of anterior gingival papilla was negatively correlated with the angle of bone margin (r=-0.58, P<0.01), and the height of bone papilla was negatively correlated with the angle of bone margin (r=-0.82, P<0.01). Conclusions: The crown shape, gingival shape and alveolar bone shape of maxillary anterior teeth were different in different tooth positions. Patients with different periodontal phenotypes had different crown width length ratio, gingival papilla height, bone papilla height, gingival margin angle, and bone margin angle. 目的: 通过数字化方法探讨后牙种植患者上前牙唇侧牙龈形态和牙槽骨形态的相关性,为前牙修复设计和美学重建提供参考。 方法: 前瞻性选取2020年5月至2021年5月于第四军医大学口腔医学院口腔修复科行种植修复的后牙缺失患者64例,其中男性24例,女性40例,年龄(25.6±3.3)岁;按牙周表型分为薄龈型(29例)和厚龈型(35例)。采用口内扫描仪进行口内扫描,并拍摄锥形束CT,利用Geomagic和Mimics软件进行测量并记录上前牙唇侧牙冠宽度和高度、龈乳头高度、龈缘角度、骨乳头高度、骨缘角度。 结果: 所有患者上颌中切牙、侧切牙、尖牙牙冠宽长比为0.85±0.08、0.80±0.08和0.86±0.09(F=10.71,P<0.01);上颌中切牙间、中切牙与侧切牙间、侧切牙与尖牙间龈乳头高度分别为(3.93±0.86)、(3.47±0.84)和(3.38±0.91)mm(F=7.44,P<0.01),其下骨乳头高度分别为(3.44±0.88)、(3.12±0.75)和(2.72±0.63)mm(F=14.26,P<0.01);上颌中切牙、侧切牙、尖牙龈缘角度分别为88.3°±7.7°、84.7°±8.9°和81.2°±6.6°(F=13.15,P<0.01),骨缘角度分别为103.2°±13.1°、99.5°±11.2°和110.6°±13.0°(F=13.25,P<0.01)。薄龈型受试者牙冠宽长比(0.81±0.08)、龈缘角度(82.2°±7.4°)、骨缘角度(99.4°±12.9°)均显著小于厚龈型受试者(分别为0.85±0.09、86.5°±8.6°、108.5°±11.4°)(t=-2.79、3.63、5.20,P<0.01);龈乳头高度[(3.93±0.81)mm]和骨乳头高度[(3.43±0.80)mm]显著大于厚龈型受试者[分别为(3.34±0.84)和(2.85±0.71)mm](t=-4.89、-5.36,P<0.01)。上前牙龈乳头高度与骨乳头高度呈中等程度正相关(r=0.66,P<0.01);牙冠宽长比与骨缘角度呈中等程度正相关(r=0.42,P<0.01);上前牙龈乳头高度与骨缘角度呈中等程度负相关(r=-0.58,P<0.01),骨乳头高度与骨缘角度呈高度负相关(r=-0.82,P<0.01)。 结论: 上前牙不同牙位的牙冠形态、牙龈形态与牙槽骨形态各不相同;不同牙周表型患者上前牙牙冠宽长比、龈乳头高度、骨乳头高度、龈缘角度、骨缘角度不同。.
引用
- Zhang W, Li Y, Liu B, et al. [Digitalized analysis of the gingival and bone morphology in the maxillary anterior teeth in patient with posterior dental implant]. Zhonghua Kou Qiang Yi Xue Za Zhi. 2022. PMID: 35368159. doi:10.3760/cma.j.cn112144-20220202-00042
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。